BEP_PCB temperatures check
Summary
| Date start | 2017:281:23:24:12.020 |
| Date stop | 2017:288:04:20:19.380 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/OCT0917/ofls |
| Run time | Tue Oct 3 16:23:44 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.38 | -2.26 | -1.48 | -0.73 | 0.55 | 1.72 | 3.55 |
| PITCH | -3.657 | -0.181 | -0.048 | 0.080 | 0.182 | 0.226 | 3.425 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.171 | -0.486 | -0.283 | -0.064 | 0.309 | 0.573 | 1.040 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.38 | 2.00 |
| TMP_BEP_PCB | 99 | 3.55 | 2.00 |
| PITCH | 1 | -3.657 | 3.00 |
| PITCH | 99 | 3.425 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
