BEP_PCB temperatures check
Summary
| Date start | 2019:293:10:42:00.000 |
| Date stop | 2019:300:20:46:23.805 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/OCT2119/ofls |
| Run time | Wed Oct 16 14:29:30 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.95 | -3.65 | -2.54 | -1.37 | -0.39 | 0.51 | 1.68 |
| PITCH | -3.754 | -0.247 | -0.201 | -0.075 | 0.070 | 0.240 | 4.456 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.631 | -1.088 | -0.530 | -0.270 | 0.336 | 1.267 | 1.619 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.95 | 2.00 |
| TMP_BEP_PCB | 50 | -1.37 | 1.00 |
| PITCH | 1 | -3.754 | 3.00 |
| PITCH | 99 | 4.456 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
