BEP_PCB temperatures check
Summary
| Date start | 2017:296:02:36:00.000 |
| Date stop | 2017:302:20:34:27.168 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/OCT2317/ofls |
| Run time | Fri Oct 20 11:58:48 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.40 | -2.32 | -1.28 | -0.45 | 0.59 | 1.84 | 2.56 |
| PITCH | -2.057 | -0.185 | -0.055 | 0.106 | 0.193 | 0.235 | 5.061 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 0 |
| ROLL | -0.880 | -0.482 | -0.313 | -0.193 | 0.233 | 0.481 | 0.688 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.4 | 2.00 |
| TMP_BEP_PCB | 99 | 2.56 | 2.00 |
| PITCH | 99 | 5.061 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
