BEP_PCB temperatures check
Summary
| Date start | 2019:249:23:27:00.000 |
| Date stop | 2019:252:09:50:17.825 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/SEP0619/ofls |
| Run time | Fri Sep 6 12:57:55 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -5.71 | -3.87 | -2.96 | -1.69 | -0.48 | 0.82 | 1.64 |
| PITCH | -3.893 | -0.240 | -0.173 | 0.051 | 0.206 | 0.263 | 5.005 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.638 | -0.843 | -0.313 | -0.016 | 0.352 | 1.160 | 1.833 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -5.71 | 2.00 |
| TMP_BEP_PCB | 50 | -1.69 | 1.00 |
| PITCH | 1 | -3.893 | 3.00 |
| PITCH | 99 | 5.005 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
