BEP_PCB temperatures check
Summary
| Date start | 2020:264:06:42:00.000 |
| Date stop | 2020:272:05:02:00.000 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2020/SEP2120/ofls |
| Run time | Thu Sep 17 20:36:26 2020 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.81 | -1.57 | -1.28 | -1.10 | -0.60 | -0.00 | 1.81 |
| PITCH | -0.577 | -0.002 | -0.001 | 0.000 | 0.001 | 0.002 | 2.440 |
| TSCPOS | -1 | -1 | 0 | 0 | 0 | 0 | 0 |
| ROLL | -0.272 | -0.005 | -0.004 | -0.000 | 0.004 | 0.005 | 0.177 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.81 | 2.00 |
| TMP_BEP_PCB | 50 | -1.1 | 1.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
PITCH
TSCPOS
ROLL
CCD/FEP Count
