DPA temperatures check
Summary
| Date start | 2018:113:13:56:00.000 |
| Date stop | 2018:120:10:01:49.097 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/APR2318/ofls |
| Run time | Fri Apr 20 20:51:53 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -4.30 | -3.52 | -2.34 | -0.97 | 0.40 | 1.21 | 2.18 |
| PITCH | -4.055 | -0.233 | -0.159 | 0.049 | 0.176 | 0.230 | 4.453 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.389 | -0.612 | -0.262 | 0.192 | 0.391 | 0.533 | 1.154 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -4.3 | 2.00 |
| 1DPAMZT | 99 | 2.18 | 2.00 |
| PITCH | 1 | -4.055 | 3.00 |
| PITCH | 99 | 4.453 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
