DPA temperatures check
Summary
| Date start | 2015:236:11:07:09.591 |
| Date stop | 2015:249:16:02:50.747 |
| 1DPAMZT status | NOT OK (Planning Limit = 35.5 C) |
| Run time | Tue Aug 18 21:05:53 2015 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
1DPAMZT Violations
| Date start | Date stop | Max temperature |
|---|---|---|
| 2015:248:12:03:51.816 | 2015:249:00:38:15.816 | 35.71 |
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.54 | -2.71 | -1.42 | -0.70 | -0.10 | 0.47 | 0.93 |
| PITCH | -0.310 | 0.165 | 0.226 | 0.249 | 0.292 | 0.317 | 0.991 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.54 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
