DPA temperatures check
Summary
| Date start | 2018:350:19:35:19.442 |
| Date stop | 2018:358:04:36:55.827 |
| Model status | OK (Planning Limit = 36.5 C) |
| Load directory | /data/acis/LoadReviews/2018/DEC1718/ofls |
| Run time | Fri Dec 14 08:32:31 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Hot Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -0.99 | -0.62 | -0.25 | 0.46 | 1.30 | 1.69 | 1.89 |
| PITCH | -4.985 | -0.269 | -0.196 | -0.009 | 0.190 | 0.257 | 2.776 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.469 | -0.661 | -0.390 | -0.037 | 0.486 | 0.766 | 1.991 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| PITCH | 1 | -4.985 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT >= 20.0 degC.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
