DPA temperatures check
Summary
| Date start | 2017:358:21:30:57.194 |
| Date stop | 2018:007:18:55:13.157 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2017/DEC2517/ofls |
| Run time | Wed Dec 20 19:38:11 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.48 | -2.89 | -1.43 | -0.34 | 1.14 | 2.37 | 2.67 |
| PITCH | -3.668 | -0.239 | -0.189 | -0.061 | 0.135 | 0.195 | 4.972 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.336 | -0.582 | -0.417 | 0.107 | 0.374 | 0.555 | 1.130 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.48 | 2.00 |
| 1DPAMZT | 99 | 2.67 | 2.00 |
| PITCH | 1 | -3.668 | 3.00 |
| PITCH | 99 | 4.972 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
