DPA temperatures check
Summary
| Date start | 2014:047:22:26:49.198 |
| Date stop | 2014:055:01:52:17.051 |
| 1DPAMZT status | OK (Planning Limit = 33.0 C) |
| Run time | Thu Feb 13 13:47:31 2014 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.35 | -2.05 | -1.42 | 0.04 | 1.36 | 1.66 | 2.21 |
| PITCH | -1.858 | -0.018 | 0.004 | 0.159 | 0.214 | 0.339 | 2.337 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.35 | 2.00 |
| 1DPAMZT | 99 | 2.21 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
