DPA temperatures check
Summary
| Date start | 2015:048:11:50:00.000 |
| Date stop | 2015:052:18:06:40.021 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Mon Feb 16 11:31:14 2015 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.15 | -1.76 | -1.19 | 0.29 | 1.18 | 1.47 | 2.33 |
| PITCH | -1.259 | 0.089 | 0.144 | 0.239 | 0.374 | 0.420 | 1.646 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.15 | 2.00 |
| 1DPAMZT | 99 | 2.33 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
