DPA temperatures check
Summary
| Date start | 2014:055:01:51:19.400 |
| Date stop | 2014:061:22:51:22.521 |
| 1DPAMZT status | OK (Planning Limit = 33.0 C) |
| Run time | Tue Feb 18 08:32:13 2014 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.39 | -2.03 | -1.24 | 0.16 | 1.33 | 1.64 | 2.19 |
| PITCH | -2.188 | -0.018 | 0.056 | 0.173 | 0.242 | 0.350 | 1.954 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.39 | 2.00 |
| 1DPAMZT | 99 | 2.19 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
