DPA temperatures check
Summary
| Date start | 2018:057:08:45:09.986 |
| Date stop | 2018:064:14:18:43.071 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/FEB2618/ofls |
| Run time | Fri Feb 23 18:38:32 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.83 | -3.43 | -2.15 | -0.78 | 0.70 | 1.79 | 2.60 |
| PITCH | -4.056 | -0.243 | -0.188 | -0.080 | 0.128 | 0.215 | 5.022 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.216 | -0.584 | -0.302 | 0.082 | 0.401 | 0.536 | 1.516 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.83 | 2.00 |
| 1DPAMZT | 99 | 2.6 | 2.00 |
| PITCH | 1 | -4.056 | 3.00 |
| PITCH | 99 | 5.022 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
