DPA temperatures check
Summary
| Date start | 2018:007:18:53:00.000 |
| Date stop | 2018:015:03:53:22.778 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN0818/ofls |
| Run time | Wed Jan 3 14:50:59 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -6.40 | -3.16 | -1.56 | -0.22 | 0.84 | 1.63 | 2.36 |
| PITCH | -5.144 | -0.252 | -0.203 | -0.065 | 0.160 | 0.237 | 3.023 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 0 |
| ROLL | -1.285 | -0.589 | -0.397 | -0.022 | 0.256 | 0.352 | 1.206 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -6.4 | 2.00 |
| 1DPAMZT | 99 | 2.36 | 2.00 |
| PITCH | 1 | -5.144 | 3.00 |
| PITCH | 99 | 3.023 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
