DPA temperatures check
Summary
| Date start | 2018:015:03:50:22.778 |
| Date stop | 2018:022:18:41:59.962 |
| Model status | NOT OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN1518/ofls |
| Run time | Wed Jan 10 08:27:31 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
1DPAMZT Violations
| Date start | Date stop | Max temperature |
|---|---|---|
| 2018:015:03:52:46.816 | 2018:015:04:09:10.816 | 35.59 |
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -6.50 | -4.96 | -2.07 | -0.09 | 0.91 | 1.71 | 2.48 |
| PITCH | -5.448 | -0.272 | -0.212 | -0.122 | 0.186 | 0.243 | 2.830 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.200 | -0.486 | -0.294 | 0.006 | 0.295 | 0.477 | 1.384 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -6.5 | 2.00 |
| 1DPAMZT | 99 | 2.48 | 2.00 |
| PITCH | 1 | -5.448 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
