DPA temperatures check
Summary
| Date start | 2018:028:23:09:00.000 |
| Date stop | 2018:036:01:06:54.765 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN2918/ofls |
| Run time | Wed Jan 24 09:11:32 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.27 | -1.99 | -1.07 | 0.00 | 1.01 | 1.80 | 3.01 |
| PITCH | -5.505 | -0.269 | -0.212 | -0.134 | 0.155 | 0.243 | 2.730 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.163 | -0.422 | -0.275 | 0.006 | 0.372 | 0.501 | 1.301 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.27 | 2.00 |
| 1DPAMZT | 99 | 3.01 | 2.00 |
| PITCH | 1 | -5.505 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
