DPA temperatures check
Summary
| Date start | 2014:188:20:47:00.000 |
| Date stop | 2014:195:09:16:55.236 |
| 1DPAMZT status | OK (Planning Limit = 34.5 C) |
| Run time | Mon Jul 7 10:22:55 2014 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.35 | -2.01 | -1.58 | -0.73 | 0.62 | 1.31 | 1.92 |
| PITCH | -2.185 | -0.047 | 0.081 | 0.122 | 0.192 | 0.286 | 3.437 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1010 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.35 | 2.00 |
| PITCH | 99 | 3.437 | 3.00 |
| TSCPOS | 99 | 1010.0 | 2.50 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
