DPA temperatures check
Summary
| Date start | 2018:154:23:26:21.284 |
| Date stop | 2018:162:04:14:21.397 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/JUN0418/ofls |
| Run time | Wed May 30 16:37:54 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -4.59 | -3.21 | -2.07 | -1.04 | 0.19 | 1.44 | 1.86 |
| PITCH | -4.213 | -0.233 | -0.189 | -0.002 | 0.178 | 0.228 | 3.587 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.132 | -0.352 | -0.238 | 0.098 | 0.289 | 0.564 | 1.564 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -4.59 | 2.00 |
| 1DPAMZT | 50 | -1.04 | 1.00 |
| PITCH | 1 | -4.213 | 3.00 |
| PITCH | 99 | 3.587 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
