DPA temperatures check
Summary
| Date start | 2015:166:13:38:03.502 |
| Date stop | 2015:180:21:51:45.895 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Thu Jun 11 10:10:35 2015 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.67 | -2.14 | -1.70 | -0.51 | 0.45 | 1.73 | 2.19 |
| PITCH | -1.439 | 0.050 | 0.128 | 0.240 | 0.376 | 0.627 | 2.352 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.67 | 2.00 |
| 1DPAMZT | 99 | 2.19 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
