DPA temperatures check
Summary
| Date start | 2016:177:09:09:02.024 |
| Date stop | 2016:186:02:24:25.403 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Fri Jun 24 15:26:19 2016 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.58 | -1.86 | -0.99 | -0.27 | 0.59 | 1.67 | 2.10 |
| PITCH | -2.087 | -0.152 | 0.035 | 0.180 | 0.293 | 0.600 | 2.204 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.58 | 2.00 |
| 1DPAMZT | 99 | 2.1 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
