DPA temperatures check
Summary
| Date start | 2016:071:19:29:57.852 |
| Date stop | 2016:081:07:25:28.336 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Thu Mar 10 17:58:51 2016 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -1.64 | -1.08 | -0.35 | 1.03 | 1.80 | 2.11 | 2.85 |
| PITCH | -1.748 | 0.196 | 0.247 | 0.349 | 0.470 | 0.756 | 2.414 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 50 | 1.03 | 1.00 |
| 1DPAMZT | 99 | 2.85 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
