DPA temperatures check
Summary
| Date start | 2018:078:09:44:10.427 |
| Date stop | 2018:085:10:06:24.882 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/MAR1918/ofls |
| Run time | Thu Mar 15 19:05:49 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -4.05 | -3.30 | -2.26 | -0.87 | 0.19 | 0.99 | 2.09 |
| PITCH | -3.988 | -0.235 | -0.155 | -0.047 | 0.101 | 0.212 | 3.903 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.382 | -0.540 | -0.368 | 0.255 | 0.487 | 0.614 | 1.556 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -4.05 | 2.00 |
| 1DPAMZT | 99 | 2.09 | 2.00 |
| PITCH | 1 | -3.988 | 3.00 |
| PITCH | 99 | 3.903 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
