DPA temperatures check
Summary
| Date start | 2018:133:23:52:32.970 |
| Date stop | 2018:141:03:38:03.643 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/MAY1418/ofls |
| Run time | Fri May 11 14:09:13 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -4.07 | -3.02 | -2.39 | -1.32 | -0.16 | 0.62 | 1.57 |
| PITCH | -3.874 | -0.232 | -0.169 | 0.049 | 0.184 | 0.231 | 3.164 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.110 | -0.497 | -0.206 | 0.114 | 0.434 | 0.725 | 1.512 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -4.07 | 2.00 |
| 1DPAMZT | 50 | -1.32 | 1.00 |
| PITCH | 1 | -3.874 | 3.00 |
| PITCH | 99 | 3.164 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
