DPA temperatures check
Summary
| Date start | 2014:145:07:21:13.062 |
| Date stop | 2014:152:17:31:09.221 |
| 1DPAMZT status | OK (Planning Limit = 33.0 C) |
| Run time | Tue May 20 18:03:41 2014 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.04 | -1.32 | -0.70 | -0.24 | 0.60 | 3.62 | 4.10 |
| PITCH | -1.175 | -0.199 | 0.043 | 0.153 | 0.254 | 1.246 | 1.709 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.04 | 2.00 |
| 1DPAMZT | 99 | 4.1 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
