DPA temperatures check
Summary
| Date start | 2018:322:17:26:00.000 |
| Date stop | 2018:329:21:35:43.954 |
| Model status | NOT OK (Planning Limit = 36.5 C) |
| Load directory | /data/acis/LoadReviews/2018/NOV1918/ofls |
| Run time | Thu Nov 15 09:28:17 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
1DPAMZT Hot Violations
| Date start | Date stop | Max temperature |
|---|---|---|
| 2018:327:06:23:50.816 | 2018:327:07:56:46.816 | 36.54 |
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -1.31 | -0.96 | -0.74 | 0.01 | 0.91 | 1.25 | 1.51 |
| PITCH | -2.433 | -0.277 | -0.240 | -0.132 | 0.173 | 0.264 | 2.481 |
| TSCPOS | -1 | -1 | -1 | 0 | 1 | 1 | 1 |
| ROLL | -0.724 | -0.560 | -0.374 | -0.003 | 0.273 | 0.598 | 1.080 |
No Validation Violations
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT >= 20.0 degC.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
