DPA temperatures check
Summary
| Date start | 2016:327:02:51:43.643 |
| Date stop | 2016:333:03:42:37.945 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Tue Nov 15 22:32:25 2016 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.13 | -2.02 | -0.88 | 0.30 | 1.18 | 1.69 | 2.40 |
| PITCH | -3.599 | -0.212 | 0.013 | 0.146 | 0.420 | 0.631 | 5.152 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.13 | 2.00 |
| 1DPAMZT | 99 | 2.4 | 2.00 |
| PITCH | 1 | -3.599 | 3.00 |
| PITCH | 99 | 5.152 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
