FEP1_ACTEL temperatures check
Summary
| Date start | 2018:106:12:57:00.086 |
| Date stop | 2018:113:13:58:10.513 |
| Model status | OK (Planning Limit = 46.0 C) |
| Load directory | /data/acis/LoadReviews/2018/APR1618/ofls |
| Run time | Tue Apr 10 13:31:50 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_FEP1_ACTEL Violations
FEP1_ACTEL Model Validation
MSID quantiles
Note: FEP1_ACTEL quantiles are calculated using only points where TMP_FEP1_ACTEL > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_FEP1_ACTEL | -3.64 | -2.70 | -1.34 | -0.26 | 1.50 | 3.16 | 4.22 |
| PITCH | -2.918 | -0.232 | -0.180 | -0.004 | 0.127 | 0.217 | 3.764 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.181 | -0.831 | -0.449 | 0.078 | 0.366 | 0.535 | 1.014 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_FEP1_ACTEL | 1 | -3.64 | 2.00 |
| TMP_FEP1_ACTEL | 99 | 4.22 | 2.00 |
| PITCH | 99 | 3.764 | 3.00 |
TMP_FEP1_ACTEL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
