FEP1_ACTEL temperatures check
Summary
| Date start | 2018:015:03:50:22.778 |
| Date stop | 2018:022:18:41:59.962 |
| Model status | OK (Planning Limit = 46.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN1518/ofls |
| Run time | Wed Jan 10 08:33:16 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_FEP1_ACTEL Violations
FEP1_ACTEL Model Validation
MSID quantiles
Note: FEP1_ACTEL quantiles are calculated using only points where TMP_FEP1_ACTEL > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_FEP1_ACTEL | -5.73 | -4.52 | -2.57 | -0.40 | 0.69 | 1.58 | 2.66 |
| PITCH | -5.743 | -0.270 | -0.212 | -0.122 | 0.186 | 0.243 | 2.830 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.132 | -0.483 | -0.294 | 0.006 | 0.295 | 0.479 | 1.385 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_FEP1_ACTEL | 1 | -5.73 | 2.00 |
| TMP_FEP1_ACTEL | 99 | 2.66 | 2.00 |
| PITCH | 1 | -5.743 | 3.00 |
TMP_FEP1_ACTEL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
