FEP1_ACTEL temperatures check
Summary
| Date start | 2017:274:22:35:00.000 |
| Date stop | 2017:281:23:27:12.020 |
| Model status | OK (Planning Limit = 43.0 C) |
| Load directory | /data/acis/LoadReviews/2017/OCT0217/ofls |
| Run time | Wed Sep 27 09:06:05 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_FEP1_ACTEL Violations
FEP1_ACTEL Model Validation
MSID quantiles
Note: FEP1_ACTEL quantiles are calculated using only points where TMP_FEP1_ACTEL > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_FEP1_ACTEL | -7.67 | -2.53 | -1.72 | -0.94 | 0.46 | 2.40 | 3.36 |
| PITCH | -4.257 | -0.209 | -0.062 | 0.094 | 0.174 | 0.211 | 2.537 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -0.889 | -0.479 | -0.281 | -0.113 | 0.297 | 0.538 | 0.907 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_FEP1_ACTEL | 1 | -7.67 | 2.00 |
| TMP_FEP1_ACTEL | 99 | 3.36 | 2.00 |
| PITCH | 1 | -4.257 | 3.00 |
TMP_FEP1_ACTEL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
