-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2014/DEC0114/oflsa/CR334_0803.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2014/NOV1714/ofls/ACIS-History.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-OUT,LETG-OUT,52280,OORMPDS,CSELFMT2,ENAB)
2014:334:12:08:43.236 0 ORBPOINT EPERIGEE
>>>WARNING: No EEF1000 seen before EPERIGEE. Is the load starting in the belts?
2014:334:15:25:06.554 6252483 MP_OBSID 52279
LATEST OCAT INFO FOR OBSID 52279:
No ocat info found for obsid 52279
2014:334:16:05:29.700 6261939 ACISPKT AA00000000
2014:334:16:05:29.700 6261939 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2014:334:16:05:33.700 6261955 ACISPKT AA00000000
2014:334:16:05:37.700 6261970 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:334:16:06:01.700 6262064 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2014:334:16:07:04.700 6262310 ACISPKT WBTX_QUIET
2014:334:16:07:08.700 6262326 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:334:16:07:12.700 6262341 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52279
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52279,OORMPDS,CSELFMT2,ENAB)
2014:334:16:07:16.700 6262357 ACISPKT RS_0000001
2014:334:16:07:20.700 6262372 ACISPKT RH_0000001
2014:334:16:07:43.700 6262462 ACISPKT RBTXINGALL
2014:334:18:52:06.700 6300952 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 334:16:05:29
from CRM file: XE1RADZ0 = 334:16:05:29
==> CRM Pad Time: 9.998 ks and Backstop Pad Time: 10.00 ks agree.
2014:334:18:52:07.700 6300956 ACISPKT AA00000000
==> ACIS integration time of 8.49 ks.
2014:334:18:52:07.700 6300956 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:334:18:52:08.700 6300960 ACISPKT AA00000000
2014:334:18:52:12.700 6300975 ACISPKT AA00000000
2014:334:18:52:16.700 6300991 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:334:18:52:40.700 6301085 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2014:334:18:53:43.700 6301330 ACISPKT WT00914014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00914014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:334:18:53:47.700 6301346 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,52279,OORMPEN,CSELFMT2,ENAB)
2014:334:18:53:51.700 6301362 ACISPKT RS_0000001
2014:334:18:53:55.700 6301377 ACISPKT RH_0000001
2014:334:18:55:07.700 6301658 MP_OBSID 17005
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17005:
Target Name: IIZw40 SI Mode: TE_00914
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 30 Remaining Exposure time: 30
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17005
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00914B is WT00914014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2014:334:18:57:44.134 6302269 SIMFOCUS -418
2014:334:18:59:11.994 6302612 SIMFOCUS -468
2014:335:03:12:48.700 6418189 ACISPKT AA00000000
==> ACIS integration time of 29.09 ks.
This is 96.97% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:335:03:12:48.700 6418189 SIMTRANS 74424 (ACIS-S)
==> THERE IS A Z-SIM OF -3.02 mm FOR THIS OBSERVATION.
2014:335:03:15:48.700 6418891 COMMAND_HW CSELFMT4
2014:335:03:15:48.700 6418891 MP_OBSID 17324
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17324:
Target Name: Capella SI Mode: TE_0099C
Instrument: ACIS-S Grating: HETG Type: CAL
Exposure Time: 30 Remaining Exposure time: 30
Offset: Y: 0 Z: -0.3 Z-sim: -3
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYY
Subarray Type: CUSTOM Start: 1 Rows: 774 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:335:03:16:23.039 6419025 COMMAND_SW 4OHETGIN
2014:335:03:20:06.500 6419897 COMMAND_HW CSELFMT2
2014:335:03:30:58.536 6422442 ACISPKT AA00000000
2014:335:03:31:02.536 6422458 ACISPKT AA00000000
2014:335:03:31:06.536 6422473 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:335:03:31:30.536 6422567 ACISPKT WSPOW3E03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S1 S2 S3 S4 S5
2014:335:03:32:33.536 6422813 ACISPKT WT0099C024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0099c024
fepCcdSelect = 10 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 773
primaryExposure = 24
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:335:03:32:37.536 6422828 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17324
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0099CB is WT0099C024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,17324,OORMPEN,CSELFMT2,ENAB)
2014:335:03:32:41.536 6422844 ACISPKT RS_0000001
2014:335:03:32:45.536 6422860 ACISPKT RH_0000001
2014:335:11:57:02.536 6540936 ACISPKT AA00000000
==> ACIS integration time of 29.09 ks.
This is 96.97% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:335:11:57:02.536 6540936 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:335:12:00:02.536 6541638 COMMAND_HW CSELFMT4
2014:335:12:00:02.536 6541638 MP_OBSID 17168
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17168:
Target Name: A2142 NE SI Mode: TE_004A6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 95 Remaining Exposure time: 95
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:335:12:00:36.875 6541772 COMMAND_SW 4OHETGRE
2014:335:12:04:20.336 6542644 COMMAND_HW CSELFMT2
2014:335:12:11:29.981 6544321 ACISPKT AA00000000
2014:335:12:11:33.981 6544336 ACISPKT AA00000000
2014:335:12:11:37.981 6544352 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:335:12:12:01.981 6544446 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2014:335:12:13:04.981 6544692 ACISPKT WT004A6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a6024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:335:12:13:08.981 6544707 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17168
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A6B is WT004A6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17168,OORMPEN,CSELFMT2,ENAB)
2014:335:12:13:12.981 6544723 ACISPKT RS_0000001
2014:335:12:13:16.981 6544738 ACISPKT RH_0000001
2014:335:19:52:22.557 6550709 ORBPOINT EAPOGEE
2014:336:15:46:09.981 6931755 ACISPKT AA00000000
==> ACIS integration time of 97.82 ks.
This is 102.97% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:336:15:49:09.981 6932457 MP_OBSID 14506
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 14506:
Target Name: HE1104-1805 SI Mode: TE_00956
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 14 Remaining Exposure time: 14
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: CUSTOM Start: 257 Rows: 512 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:336:16:05:12.804 6936215 ACISPKT AA00000000
2014:336:16:05:16.804 6936230 ACISPKT AA00000000
2014:336:16:05:20.804 6936246 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:336:16:05:44.804 6936340 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2014:336:16:06:47.804 6936585 ACISPKT WT00956024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00956024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 256
subarrayRowCount = 511
primaryExposure = 17
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:336:16:06:51.804 6936601 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 14506
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00956B is WT00956024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,14506,OORMPEN,CSELFMT2,ENAB)
2014:336:16:06:55.804 6936617 ACISPKT RS_0000001
2014:336:16:06:59.804 6936632 ACISPKT RH_0000001
2014:336:20:16:34.580 6995070 ACISPKT AA00000000
==> ACIS integration time of 14.00 ks.
This is 100.01% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:336:20:16:34.580 6995070 SIMTRANS -99616 (HRC-S)
2014:336:20:19:34.580 6995773 MP_OBSID 52278
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52278:
No ocat info found for obsid 52278
2014:336:20:22:11.014 6996383 SIMFOCUS -991
2014:336:20:23:37.874 6996722 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2014:336:20:23:37.874 6996722 ACISPKT AA00000000
2014:336:20:23:41.874 6996738 ACISPKT AA00000000
2014:336:20:23:45.874 6996753 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:336:20:24:09.874 6996847 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:336:20:25:12.874 6997093 ACISPKT WBTX_QUIET
2014:336:20:25:16.874 6997109 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:336:20:25:20.874 6997124 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52278
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52278,OORMPDS,CSELFMT2,ENAB)
2014:336:20:25:24.874 6997140 ACISPKT RS_0000001
2014:336:20:25:28.874 6997155 ACISPKT RH_0000001
2014:336:20:25:51.874 6997245 ACISPKT RBTXINGALL
2014:336:20:28:07.874 6997776 MP_OBSID 52277
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52277:
No ocat info found for obsid 52277
2014:336:22:50:21.398 7031077 MP_OBSID 52276
LATEST OCAT INFO FOR OBSID 52276:
No ocat info found for obsid 52276
2014:336:23:03:58.874 7034268 ACISPKT AA00000000
==> ACIS integration time of 8.12 ks.
2014:336:23:06:58.874 7034970 ACISPKT AA00000000
2014:336:23:06:58.874 7034970 ORBPOINT EEF1000
==> Entry leg pad time is 9.80 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 336:23:06:58
from CRM file: EE1RADZ0 = 336:23:06:58
==> CRM Pad Time: 9.801 ks and Backstop Pad Time: 9.80 ks agree.
2014:336:23:07:07.874 7035005 ACISPKT WSVIDALLDN
2014:336:23:08:10.874 7035251 ACISPKT RS_0000001
2014:337:02:48:13.199 7086772 MP_OBSID 52275
LATEST OCAT INFO FOR OBSID 52275:
No ocat info found for obsid 52275
2014:337:03:36:11.904 7096181 ORBPOINT EPERIGEE
2014:337:07:23:18.685 7151184 MP_OBSID 52274
LATEST OCAT INFO FOR OBSID 52274:
No ocat info found for obsid 52274
2014:337:07:54:58.874 7158599 ACISPKT WSVIDALLDN
2014:337:07:54:58.874 7158599 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TN_000B4
2014:337:07:55:16.874 7158670 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:337:07:56:19.874 7158915 ACISPKT WT000B5024
ACIS PBLOCK LOADS:
parameterBlockId = 0x000b5024
fepCcdSelect = 7 0 1 2 3 6
fepMode = 0 # FEP_TE_MODE_RAW
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
>>>ERROR: There is no WBTX_QUIET command before loading the parameter block for a CTI measurement.
2014:337:07:56:23.874 7158931 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52274
---------------------------------------------------------------------------
==> Parameter Block for SI mode TN_000B4B is WT000B5024 and is stored.
>>>WARNING: This parameter block is NOT recalculating a bias
Please confirm the parameter block for 52274
This SI_MODE is TN_000B4. Previous SI_MODE is TE_007AC
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52274,OORMPDS,CSELFMT2,ENAB)
2014:337:07:56:27.874 7158947 ACISPKT RS_0000001
2014:337:07:56:31.874 7158962 ACISPKT RH_0000001
2014:337:10:38:38.874 7196921 ACISPKT AA00000000
==> ACIS integration time of 9.74 ks.
2014:337:10:41:37.874 7197620 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 337:07:54:58
from CRM file: XE1RADZ0 = 337:07:54:58
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2014:337:10:41:38.874 7197624 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:337:10:41:39.874 7197628 ACISPKT AA00000000
2014:337:10:41:43.874 7197643 ACISPKT AA00000000
2014:337:10:41:47.874 7197659 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:337:10:42:11.874 7197753 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2014:337:10:43:14.874 7197998 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:337:10:43:18.874 7198014 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,52274,OORMPEN,CSELFMT2,ENAB)
2014:337:10:43:22.874 7198030 ACISPKT RS_0000001
2014:337:10:43:26.874 7198045 ACISPKT RH_0000001
2014:337:10:44:38.874 7198326 MP_OBSID 17474
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17474:
Target Name: Abell 1986 SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17474
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2014:337:10:47:39.084 7199029 SIMFOCUS -486
2014:337:10:49:05.584 7199367 SIMFOCUS -536
2014:337:12:29:16.874 7222826 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:337:12:29:16.874 7222826 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:337:12:31:16.050 7223291 SIMFOCUS -418
2014:337:12:32:16.874 7223528 MP_OBSID 17492
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17492:
Target Name: A2142 NE SI Mode: TE_004A6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 85 Remaining Exposure time: 85
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:337:12:32:16.874 7223528 ACISPKT AA00000000
2014:337:12:32:20.874 7223544 ACISPKT AA00000000
2014:337:12:32:24.874 7223559 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:337:12:32:34.810 7223598 SIMFOCUS -468
2014:337:12:32:48.874 7223653 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2014:337:12:33:51.874 7223899 ACISPKT WT004A6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a6024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:337:12:33:55.874 7223914 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17492
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A6B is WT004A6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17492,OORMPEN,CSELFMT2,ENAB)
2014:337:12:33:59.874 7223930 ACISPKT RS_0000001
2014:337:12:34:03.874 7223946 ACISPKT RH_0000001
2014:338:10:47:17.874 7536117 ACISPKT AA00000000
==> ACIS integration time of 78.64 ks.
This is 92.52% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:338:10:47:17.874 7536117 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:338:10:49:17.050 7536582 SIMFOCUS -536
2014:338:10:50:17.874 7536820 MP_OBSID 16671
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16671:
Target Name: CW Cep SI Mode: TE_00866
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 7 Remaining Exposure time: 7
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2014:338:10:56:39.428 7538309 ACISPKT AA00000000
2014:338:10:56:43.428 7538324 ACISPKT AA00000000
2014:338:10:56:47.428 7538340 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:338:10:57:11.428 7538434 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2014:338:10:58:14.428 7538680 ACISPKT WT00866024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00866024
fepCcdSelect = 10 3 2 1 0 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:338:10:58:18.428 7538695 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16671
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00866B is WT00866024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16671,OORMPEN,CSELFMT2,ENAB)
2014:338:10:58:22.428 7538711 ACISPKT RS_0000001
2014:338:10:58:26.428 7538726 ACISPKT RH_0000001
2014:338:11:20:04.728 7542529 ORBPOINT EAPOGEE
2014:338:13:15:36.428 7570843 ACISPKT AA00000000
==> ACIS integration time of 7.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:338:13:18:36.428 7571546 MP_OBSID 17486
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17486:
Target Name: 30 Doradus SI Mode: TE_004DE
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 46 Remaining Exposure time: 46
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:338:13:40:54.000 7576766 ACISPKT AA00000000
2014:338:13:40:58.000 7576781 ACISPKT AA00000000
2014:338:13:41:02.000 7576797 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:338:13:41:26.000 7576891 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:338:13:42:29.000 7577136 ACISPKT WT004DE034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004de034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2014:338:13:42:33.000 7577152 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17486
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004DEB is WT004DE034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17486,OORMPEN,CSELFMT2,ENAB)
2014:338:13:42:37.000 7577168 ACISPKT RS_0000001
2014:338:13:42:41.000 7577183 ACISPKT RH_0000001
2014:338:23:32:34.000 7715302 ACISPKT AA00000000
==> ACIS integration time of 34.00 ks.
This is 73.91% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:338:23:35:34.000 7716005 MP_OBSID 16134
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16134:
Target Name: UGC 03957 WEST SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:338:23:55:53.379 7720763 ACISPKT AA00000000
2014:338:23:55:57.379 7720779 ACISPKT AA00000000
2014:338:23:56:01.379 7720794 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:338:23:56:25.379 7720888 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2014:338:23:57:28.379 7721134 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:338:23:57:32.379 7721150 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16134
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16134,OORMPEN,CSELFMT2,ENAB)
2014:338:23:57:36.379 7721165 ACISPKT RS_0000001
2014:338:23:57:40.379 7721181 ACISPKT RH_0000001
2014:339:03:06:50.379 7765473 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:339:03:06:50.379 7765473 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:339:03:08:49.555 7765939 SIMFOCUS -418
2014:339:03:09:50.379 7766176 MP_OBSID 17059
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17059:
Target Name: MCG+03-07-047 SI Mode: TE_00958
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 31 Remaining Exposure time: 31
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:339:03:10:08.315 7766246 SIMFOCUS -468
2014:339:03:28:37.885 7770576 ACISPKT AA00000000
2014:339:03:28:41.885 7770592 ACISPKT AA00000000
2014:339:03:28:45.885 7770607 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:339:03:29:09.885 7770701 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2014:339:03:30:12.885 7770947 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:339:03:30:16.885 7770962 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17059
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17059,OORMPEN,CSELFMT2,ENAB)
2014:339:03:30:20.885 7770978 ACISPKT RS_0000001
2014:339:03:30:24.885 7770993 ACISPKT RH_0000001
2014:339:12:27:35.254 7896771 ACISPKT AA00000000
==> ACIS integration time of 31.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:339:12:27:35.254 7896771 SIMTRANS -99616 (HRC-S)
2014:339:12:30:35.254 7897473 MP_OBSID 52273
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52273:
No ocat info found for obsid 52273
2014:339:12:33:11.688 7898083 SIMFOCUS -991
2014:339:12:34:38.548 7898422 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2014:339:12:34:38.548 7898422 ACISPKT AA00000000
2014:339:12:34:42.548 7898438 ACISPKT AA00000000
2014:339:12:34:46.548 7898454 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:339:12:35:10.548 7898547 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2014:339:12:36:13.548 7898793 ACISPKT WBTX_QUIET
2014:339:12:36:17.548 7898809 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:339:12:36:21.548 7898824 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52273
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52273,OORMPDS,CSELFMT2,ENAB)
2014:339:12:36:25.548 7898840 ACISPKT RS_0000001
2014:339:12:36:29.548 7898856 ACISPKT RH_0000001
2014:339:12:36:52.548 7898945 ACISPKT RBTXINGALL
2014:339:12:39:08.548 7899476 MP_OBSID 52272
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52272:
No ocat info found for obsid 52272
2014:339:14:50:59.548 7930348 ACISPKT AA00000000
==> ACIS integration time of 6.68 ks.
2014:339:14:51:12.013 7930397 MP_OBSID 52271
==> ObsID change occurs 0.2 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 52271:
No ocat info found for obsid 52271
2014:339:14:53:59.548 7931051 ACISPKT AA00000000
2014:339:14:53:59.548 7931051 ORBPOINT EEF1000
==> Entry leg pad time is 8.36 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 339:14:53:59
from CRM file: EE1RADZ0 = 339:14:53:59
==> CRM Pad Time: 8.361 ks and Backstop Pad Time: 8.36 ks agree.
2014:339:14:54:08.548 7931086 ACISPKT WSVIDALLDN
2014:339:14:55:11.548 7931332 ACISPKT RS_0000001
2014:339:19:04:23.182 7941172 ORBPOINT EPERIGEE
2014:339:21:58:59.882 8030564 MP_OBSID 52270
LATEST OCAT INFO FOR OBSID 52270:
No ocat info found for obsid 52270
2014:339:22:29:59.548 8037821 ACISPKT AA00000000
2014:339:22:29:59.548 8037821 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2014:339:22:30:03.548 8037837 ACISPKT AA00000000
2014:339:22:30:07.548 8037853 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:339:22:30:31.548 8037946 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:339:22:31:34.548 8038192 ACISPKT WBTX_QUIET
2014:339:22:31:38.548 8038208 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:339:22:31:42.548 8038223 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52270
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52270,OORMPDS,CSELFMT2,ENAB)
2014:339:22:31:46.548 8038239 ACISPKT RS_0000001
2014:339:22:31:50.548 8038255 ACISPKT RH_0000001
2014:339:22:32:13.548 8038344 ACISPKT RBTXINGALL
2014:340:01:16:38.548 8076842 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 339:22:29:59
from CRM file: XE1RADZ0 = 339:22:29:59
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2014:340:01:16:39.548 8076846 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2014:340:01:16:39.548 8076846 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:340:01:16:40.548 8076850 ACISPKT AA00000000
2014:340:01:16:44.548 8076865 ACISPKT AA00000000
2014:340:01:16:48.548 8076881 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:340:01:17:12.548 8076975 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2014:340:01:18:15.548 8077220 ACISPKT WT00BB6014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00bb6014
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 2750
windowSlotIndex = 65535
2014:340:01:18:19.548 8077236 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,52270,OORMPEN,CSELFMT2,ENAB)
2014:340:01:18:23.548 8077252 ACISPKT RS_0000001
2014:340:01:18:27.548 8077267 ACISPKT RH_0000001
2014:340:01:19:39.548 8077548 MP_OBSID 16153
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16153:
Target Name: RXJ0530.6-2226 SI Mode: TE_00BB6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: -1.4 Z: 1 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 11
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 16153
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00BB6B is WT00BB6014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2014:340:01:22:39.758 8078252 SIMFOCUS -486
2014:340:01:24:06.258 8078589 SIMFOCUS -536
2014:340:03:05:00.548 8102216 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:340:03:08:00.548 8102918 MP_OBSID 16267
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16267:
Target Name: J030654.87+010833.7 SI Mode: TE_00986
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: YYYY NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:340:03:11:14.246 8103674 ACISPKT AA00000000
2014:340:03:11:18.246 8103690 ACISPKT AA00000000
2014:340:03:11:22.246 8103705 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:340:03:11:46.246 8103799 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2014:340:03:12:49.246 8104045 ACISPKT WT00986024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00986024
fepCcdSelect = 10 7 3 2 1 0
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:340:03:12:53.246 8104060 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16267
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00986B is WT00986024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16267,OORMPEN,CSELFMT2,ENAB)
2014:340:03:12:57.246 8104076 ACISPKT RS_0000001
2014:340:03:13:01.246 8104091 ACISPKT RH_0000001
2014:340:06:22:11.246 8148384 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:340:06:25:11.246 8149087 MP_OBSID 16155
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16155:
Target Name: RXJ2043.2-2144 SI Mode: TE_00BB6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 6 Remaining Exposure time: 6
Offset: Y: -1.4 Z: 1 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 11
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:340:06:34:03.045 8151162 ACISPKT AA00000000
2014:340:06:34:07.045 8151178 ACISPKT AA00000000
2014:340:06:34:11.045 8151193 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:340:06:34:35.045 8151287 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2014:340:06:35:38.045 8151533 ACISPKT WT00BB6014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00bb6014
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 2750
windowSlotIndex = 65535
2014:340:06:35:42.045 8151548 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16155
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00BB6B is WT00BB6014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16155,OORMPEN,CSELFMT2,ENAB)
2014:340:06:35:46.045 8151564 ACISPKT RS_0000001
2014:340:06:35:50.045 8151579 ACISPKT RH_0000001
2014:340:08:39:03.045 8180430 ACISPKT AA00000000
==> ACIS integration time of 6.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:340:08:39:03.045 8180430 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:340:08:41:02.221 8180895 SIMFOCUS -418
2014:340:08:42:03.045 8181133 MP_OBSID 15726
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 15726:
Target Name: 2MASS 1315-2649 SI Mode: TE_004A4
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0.15 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:340:08:42:20.981 8181203 SIMFOCUS -468
2014:340:09:03:23.311 8186129 ACISPKT AA00000000
2014:340:09:03:27.311 8186144 ACISPKT AA00000000
2014:340:09:03:31.311 8186160 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:340:09:03:55.311 8186254 ACISPKT WSPOW1EC3F
==> WSPOW COMMAND LOADS: All Feps; I2 I3 S1 S2 S3 S4
2014:340:09:04:58.311 8186500 ACISPKT WT004A4034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a4034
fepCcdSelect = 2 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:340:09:05:02.311 8186515 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 15726
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A4B is WT004A4034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,15726,OORMPEN,CSELFMT2,ENAB)
2014:340:09:05:06.311 8186531 ACISPKT RS_0000001
2014:340:09:05:10.311 8186546 ACISPKT RH_0000001
2014:340:16:25:03.311 8289543 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:340:16:25:03.311 8289543 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:340:16:27:02.487 8290009 SIMFOCUS -536
2014:340:16:28:03.311 8290246 MP_OBSID 17555
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17555:
Target Name: 30 Doradus SI Mode: TE_004DE
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 56 Remaining Exposure time: 56
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:340:16:33:00.425 8291405 ACISPKT AA00000000
2014:340:16:33:04.425 8291421 ACISPKT AA00000000
2014:340:16:33:08.425 8291437 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:340:16:33:32.425 8291530 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:340:16:34:35.425 8291776 ACISPKT WT004DE034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004de034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2014:340:16:34:39.425 8291792 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17555
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004DEB is WT004DE034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17555,OORMPEN,CSELFMT2,ENAB)
2014:340:16:34:43.425 8291807 ACISPKT RS_0000001
2014:340:16:34:47.425 8291823 ACISPKT RH_0000001
2014:341:02:47:58.065 8297961 ORBPOINT EAPOGEE
2014:341:08:31:20.425 8515796 ACISPKT AA00000000
==> ACIS integration time of 56.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:341:08:31:20.425 8515796 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:341:08:33:19.601 8516261 SIMFOCUS -418
2014:341:08:34:20.425 8516498 MP_OBSID 17172
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17172:
Target Name: Abell 1664 SI Mode: TE_0046E
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 66 Remaining Exposure time: 66
Offset: Y: -1 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:341:08:34:38.361 8516568 SIMFOCUS -468
2014:341:08:40:19.387 8517899 ACISPKT AA00000000
2014:341:08:40:23.387 8517914 ACISPKT AA00000000
2014:341:08:40:27.387 8517930 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:341:08:40:51.387 8518024 ACISPKT WSPOW0EC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S1 S2 S3
2014:341:08:41:54.387 8518270 ACISPKT WT0046E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046e034
fepCcdSelect = 10 7 5 6 3 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:341:08:41:58.387 8518285 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17172
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046EB is WT0046E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17172,OORMPEN,CSELFMT2,ENAB)
2014:341:08:42:02.387 8518301 ACISPKT RS_0000001
2014:341:08:42:06.387 8518316 ACISPKT RH_0000001
2014:342:03:57:22.026 8788816 ACISPKT AA00000000
==> ACIS integration time of 67.97 ks.
This is 102.98% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:342:03:57:22.026 8788816 SIMTRANS -99616 (HRC-S)
2014:342:04:00:22.026 8789519 MP_OBSID 52269
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52269:
No ocat info found for obsid 52269
2014:342:04:02:58.460 8790129 SIMFOCUS -991
2014:342:04:04:25.320 8790468 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2014:342:04:04:25.320 8790468 ACISPKT AA00000000
2014:342:04:04:29.320 8790484 ACISPKT AA00000000
2014:342:04:04:33.320 8790500 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:342:04:04:57.320 8790593 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2014:342:04:06:00.320 8790839 ACISPKT WBTX_QUIET
2014:342:04:06:04.320 8790855 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:342:04:06:08.320 8790870 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52269
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52269,OORMPDS,CSELFMT2,ENAB)
2014:342:04:06:12.320 8790886 ACISPKT RS_0000001
2014:342:04:06:16.320 8790901 ACISPKT RH_0000001
2014:342:04:06:39.320 8790991 ACISPKT RBTXINGALL
2014:342:04:08:55.320 8791522 MP_OBSID 52268
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52268:
No ocat info found for obsid 52268
2014:342:06:23:20.621 8822996 MP_OBSID 52267
LATEST OCAT INFO FOR OBSID 52267:
No ocat info found for obsid 52267
2014:342:06:48:05.320 8828790 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2014:342:06:51:05.320 8829493 ACISPKT AA00000000
2014:342:06:51:05.320 8829493 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 342:06:51:05
from CRM file: EE1RADZ0 = 342:06:51:05
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2014:342:06:51:14.320 8829528 ACISPKT WSVIDALLDN
2014:342:06:52:17.320 8829774 ACISPKT RS_0000001
2014:342:10:32:56.022 8834144 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2014:342:10:33:00.000 8881452 COMMAND_HW 1HHTRBEN
2014:342:10:33:01.000 8881456 COMMAND_HW 1HHTRBON
2014:342:13:56:58.150 8929211 MP_OBSID 52266
LATEST OCAT INFO FOR OBSID 52266:
No ocat info found for obsid 52266
2014:342:14:37:05.320 8938605 ACISPKT WSVIDALLDN
2014:342:14:37:05.320 8938605 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TN_000B6
2014:342:14:37:23.320 8938675 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2014:342:14:38:26.320 8938921 ACISPKT WT000B7024
ACIS PBLOCK LOADS:
parameterBlockId = 0x000b7024
fepCcdSelect = 7 5 4 8 9 6
fepMode = 0 # FEP_TE_MODE_RAW
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
>>>ERROR: There is no WBTX_QUIET command before loading the parameter block for a CTI measurement.
2014:342:14:38:30.320 8938937 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52266
---------------------------------------------------------------------------
==> Parameter Block for SI mode TN_000B6B is WT000B7024 and is stored.
>>>WARNING: This parameter block is NOT recalculating a bias
Please confirm the parameter block for 52266
This SI_MODE is TN_000B6. Previous SI_MODE is TE_007AE
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52266,OORMPDS,CSELFMT2,ENAB)
2014:342:14:38:34.320 8938952 ACISPKT RS_0000001
2014:342:14:38:38.320 8938968 ACISPKT RH_0000001
2014:342:17:18:43.320 8976451 ACISPKT AA00000000
==> ACIS integration time of 9.61 ks.
2014:342:17:21:42.320 8977149 COMMAND_SW OORMPEN
==> Exit leg pad time is 9.88 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 342:14:37:05
from CRM file: XE1RADZ0 = 342:14:37:05
==> CRM Pad Time: 9.878 ks and Backstop Pad Time: 9.88 ks agree.
2014:342:17:21:43.320 8977153 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:342:17:21:44.320 8977157 ACISPKT AA00000000
2014:342:17:21:48.320 8977173 ACISPKT AA00000000
2014:342:17:21:52.320 8977188 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:342:17:22:16.320 8977282 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2014:342:17:23:19.320 8977528 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:342:17:23:23.320 8977543 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,52266,OORMPEN,CSELFMT2,ENAB)
2014:342:17:23:27.320 8977559 ACISPKT RS_0000001
2014:342:17:23:31.320 8977575 ACISPKT RH_0000001
2014:342:17:24:43.320 8977856 MP_OBSID 16185
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16185:
Target Name: Chandra Deep Field-South SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 16185
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2014:342:17:27:43.530 8978559 SIMFOCUS -486
2014:342:17:29:10.030 8978896 SIMFOCUS -536
2014:343:07:23:59.320 9174367 ACISPKT AA00000000
==> ACIS integration time of 49.20 ks.
This is 98.40% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:343:07:26:59.320 9175069 MP_OBSID 16150
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16150:
Target Name: RXJ0507.7-0915 SI Mode: TE_00BB6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: -1.4 Z: 1 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 11
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:343:07:26:59.320 9175069 ACISPKT AA00000000
2014:343:07:27:03.320 9175085 ACISPKT AA00000000
2014:343:07:27:07.320 9175100 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:343:07:27:31.320 9175194 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2014:343:07:28:34.320 9175440 ACISPKT WT00BB6014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00bb6014
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 2750
windowSlotIndex = 65535
2014:343:07:28:38.320 9175456 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16150
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00BB6B is WT00BB6014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16150,OORMPEN,CSELFMT2,ENAB)
2014:343:07:28:42.320 9175471 ACISPKT RS_0000001
2014:343:07:28:46.320 9175487 ACISPKT RH_0000001
2014:343:09:15:19.320 9200435 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:343:09:15:19.320 9200435 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:343:09:17:18.496 9200900 SIMFOCUS -418
2014:343:09:18:19.320 9201138 MP_OBSID 17089
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17089:
Target Name: 0234+285 SI Mode: TE_005B8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 40 Remaining Exposure time: 40
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:343:09:18:37.256 9201208 SIMFOCUS -468
2014:343:09:43:07.781 9206946 ACISPKT AA00000000
2014:343:09:43:11.781 9206962 ACISPKT AA00000000
2014:343:09:43:15.781 9206977 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:343:09:43:39.781 9207071 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2014:343:09:44:42.781 9207317 ACISPKT WT005B8024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005b8024
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2014:343:09:44:46.781 9207333 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17089
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005B8B is WT005B8024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17089,OORMPEN,CSELFMT2,ENAB)
2014:343:09:44:50.781 9207348 ACISPKT RS_0000001
2014:343:09:44:54.781 9207364 ACISPKT RH_0000001
2014:343:18:16:23.356 9210505 ORBPOINT EAPOGEE
2014:343:21:01:59.781 9365900 ACISPKT AA00000000
==> ACIS integration time of 40.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:343:21:01:59.781 9365900 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:343:21:03:58.957 9366365 SIMFOCUS -536
2014:343:21:04:59.781 9366603 MP_OBSID 17556
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17556:
Target Name: Chandra Deep Field-South SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:343:21:13:51.911 9368679 ACISPKT AA00000000
2014:343:21:13:55.911 9368695 ACISPKT AA00000000
2014:343:21:13:59.911 9368711 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:343:21:14:23.911 9368804 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2014:343:21:15:26.911 9369050 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:343:21:15:30.911 9369066 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17556
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17556,OORMPEN,CSELFMT2,ENAB)
2014:343:21:15:34.911 9369081 ACISPKT RS_0000001
2014:343:21:15:38.911 9369097 ACISPKT RH_0000001
2014:344:13:17:48.911 9594385 ACISPKT AA00000000
==> ACIS integration time of 56.50 ks.
This is 113.00% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:344:13:17:48.911 9594385 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:344:13:19:48.087 9594850 SIMFOCUS -418
2014:344:13:20:48.911 9595087 MP_OBSID 16974
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16974:
Target Name: GALEX J024352.8-003703 SI Mode: TE_0065A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 17.7 Remaining Exposure time: 17.7
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2014:344:13:20:48.911 9595087 ACISPKT AA00000000
2014:344:13:20:52.911 9595103 ACISPKT AA00000000
2014:344:13:20:56.911 9595118 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:344:13:21:06.847 9595157 SIMFOCUS -468
2014:344:13:21:20.911 9595212 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2014:344:13:22:23.911 9595458 ACISPKT WT0065A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0065a034
fepCcdSelect = 10 7 6 3 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:344:13:22:27.911 9595473 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16974
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0065AB is WT0065A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16974,OORMPEN,CSELFMT2,ENAB)
2014:344:13:22:31.911 9595489 ACISPKT RS_0000001
2014:344:13:22:35.911 9595505 ACISPKT RH_0000001
2014:344:18:38:05.994 9669378 ACISPKT AA00000000
==> ACIS integration time of 17.70 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:344:18:38:05.994 9669378 SIMTRANS -99616 (HRC-S)
2014:344:18:41:05.994 9670081 MP_OBSID 52265
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52265:
No ocat info found for obsid 52265
2014:344:18:43:42.428 9670691 SIMFOCUS -991
2014:344:18:45:09.288 9671030 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2014:344:18:45:09.288 9671030 ACISPKT AA00000000
2014:344:18:45:13.288 9671046 ACISPKT AA00000000
2014:344:18:45:17.288 9671061 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:344:18:45:41.288 9671155 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:344:18:46:44.288 9671401 ACISPKT WBTX_QUIET
2014:344:18:46:48.288 9671416 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:344:18:46:52.288 9671432 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52265
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52265,OORMPDS,CSELFMT2,ENAB)
2014:344:18:46:56.288 9671448 ACISPKT RS_0000001
2014:344:18:47:00.288 9671463 ACISPKT RH_0000001
2014:344:18:47:23.288 9671553 ACISPKT RBTXINGALL
2014:344:18:49:39.288 9672084 MP_OBSID 52264
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52264:
No ocat info found for obsid 52264
2014:344:20:41:28.931 9698268 MP_OBSID 52263
LATEST OCAT INFO FOR OBSID 52263:
No ocat info found for obsid 52263
2014:344:21:23:30.288 9708107 ACISPKT AA00000000
==> ACIS integration time of 8.00 ks.
2014:344:21:26:30.288 9708810 ACISPKT AA00000000
2014:344:21:26:30.288 9708810 ORBPOINT EEF1000
==> Entry leg pad time is 9.68 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 344:21:26:30
from CRM file: EE1RADZ0 = 344:21:26:30
==> CRM Pad Time: 9.681 ks and Backstop Pad Time: 9.68 ks agree.
2014:344:21:26:39.288 9708845 ACISPKT WSVIDALLDN
2014:344:21:27:42.288 9709091 ACISPKT RS_0000001
>>>WARNING: An ACIS Hardware command is in the vehicle load. Check for SAR.
2014:345:02:01:00.000 9773082 COMMAND_HW 1HHTRBOF
>>>WARNING: An ACIS Hardware command is in the vehicle load. Check for SAR.
2014:345:02:01:01.000 9773086 COMMAND_HW 1HHTRBDS
2014:345:02:01:01.669 9773086 ORBPOINT EPERIGEE
2014:345:02:02:00.000 9773316 COMMAND_HW 1HHTRBOF
2014:345:02:02:01.000 9773320 COMMAND_HW 1HHTRBDS
2014:345:05:40:24.627 9824456 MP_OBSID 52262
LATEST OCAT INFO FOR OBSID 52262:
No ocat info found for obsid 52262
2014:345:06:18:30.288 9833375 ACISPKT AA00000000
2014:345:06:18:30.288 9833375 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2014:345:06:18:34.288 9833391 ACISPKT AA00000000
2014:345:06:18:38.288 9833407 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:345:06:19:02.288 9833500 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2014:345:06:20:05.288 9833746 ACISPKT WBTX_QUIET
2014:345:06:20:09.288 9833762 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:345:06:20:13.288 9833777 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52262
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52262,OORMPDS,CSELFMT2,ENAB)
2014:345:06:20:17.288 9833793 ACISPKT RS_0000001
2014:345:06:20:21.288 9833809 ACISPKT RH_0000001
2014:345:06:20:44.288 9833898 ACISPKT RBTXINGALL
2014:345:09:05:09.288 9872396 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 345:06:18:30
from CRM file: XE1RADZ0 = 345:06:18:30
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2014:345:09:05:10.288 9872400 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2014:345:09:05:10.288 9872400 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:345:09:05:11.288 9872404 ACISPKT AA00000000
2014:345:09:05:15.288 9872419 ACISPKT AA00000000
2014:345:09:05:19.288 9872435 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:345:09:05:43.288 9872529 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2014:345:09:06:46.288 9872774 ACISPKT WT00914014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00914014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:345:09:06:50.288 9872790 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,52262,OORMPEN,CSELFMT2,ENAB)
2014:345:09:06:54.288 9872806 ACISPKT RS_0000001
2014:345:09:06:58.288 9872821 ACISPKT RH_0000001
2014:345:09:08:10.288 9873102 MP_OBSID 17081
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17081:
Target Name: SDSS J080117.79+521034.5 SI Mode: TE_00914
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 44 Remaining Exposure time: 44
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17081
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00914B is WT00914014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2014:345:09:10:46.722 9873713 SIMFOCUS -418
2014:345:09:12:14.582 9874056 SIMFOCUS -468
2014:345:21:34:21.288 10047818 ACISPKT AA00000000
==> ACIS integration time of 44.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:345:21:37:21.288 10048521 MP_OBSID 17557
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17557:
Target Name: Abell 1664 SI Mode: TE_0046E
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 114 Remaining Exposure time: 114
Offset: Y: -1 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2014:345:21:48:01.354 10051019 ACISPKT AA00000000
2014:345:21:48:05.354 10051034 ACISPKT AA00000000
2014:345:21:48:09.354 10051050 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:345:21:48:33.354 10051143 ACISPKT WSPOW0EC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S1 S2 S3
2014:345:21:49:36.354 10051389 ACISPKT WT0046E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046e034
fepCcdSelect = 10 7 5 6 3 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:345:21:49:40.354 10051405 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17557
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046EB is WT0046E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17557,OORMPEN,CSELFMT2,ENAB)
2014:345:21:49:44.354 10051421 ACISPKT RS_0000001
2014:345:21:49:48.354 10051436 ACISPKT RH_0000001
2014:346:09:44:50.303 10055707 ORBPOINT EAPOGEE
2014:347:05:46:33.354 10500236 ACISPKT AA00000000
==> ACIS integration time of 113.65 ks.
This is 99.70% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:347:05:49:33.354 10500939 MP_OBSID 16660
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16660:
Target Name: SDSS J075745.52+280728.8 SI Mode: TE_00600
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2014:347:05:57:10.104 10502721 ACISPKT AA00000000
2014:347:05:57:14.104 10502737 ACISPKT AA00000000
2014:347:05:57:18.104 10502752 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:347:05:57:42.104 10502846 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2014:347:05:58:45.104 10503092 ACISPKT WT00600034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00600034
fepCcdSelect = 4 7 5 6 8 9
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:347:05:58:49.104 10503107 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16660
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00600B is WT00600034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16660,OORMPEN,CSELFMT2,ENAB)
2014:347:05:58:53.104 10503123 ACISPKT RS_0000001
2014:347:05:58:57.104 10503139 ACISPKT RH_0000001
2014:347:10:32:10.712 10567114 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2014:347:10:32:10.712 10567114 SIMTRANS -99616 (HRC-S)
2014:347:10:35:10.712 10567816 MP_OBSID 52261
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52261:
No ocat info found for obsid 52261
2014:347:10:37:47.146 10568427 SIMFOCUS -991
2014:347:10:39:14.006 10568766 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2014:347:10:39:14.006 10568766 ACISPKT AA00000000
2014:347:10:39:18.006 10568781 ACISPKT AA00000000
2014:347:10:39:22.006 10568797 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:347:10:39:46.006 10568890 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2014:347:10:40:49.006 10569136 ACISPKT WBTX_QUIET
2014:347:10:40:53.006 10569152 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:347:10:40:57.006 10569167 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52261
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52261,OORMPDS,CSELFMT2,ENAB)
2014:347:10:41:01.006 10569183 ACISPKT RS_0000001
2014:347:10:41:05.006 10569199 ACISPKT RH_0000001
2014:347:10:41:28.006 10569288 ACISPKT RBTXINGALL
2014:347:10:43:44.006 10569819 MP_OBSID 52260
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52260:
No ocat info found for obsid 52260
2014:347:13:22:54.006 10607087 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2014:347:13:25:54.006 10607790 ACISPKT AA00000000
2014:347:13:25:54.006 10607790 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 347:13:25:54
from CRM file: EE1RADZ0 = 347:13:25:54
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2014:347:13:26:03.006 10607825 ACISPKT WSVIDALLDN
2014:347:13:27:06.006 10608071 ACISPKT RS_0000001
2014:347:17:26:12.890 10664059 MP_OBSID 52259
LATEST OCAT INFO FOR OBSID 52259:
No ocat info found for obsid 52259
2014:347:17:29:00.413 10664111 ORBPOINT EPERIGEE
2014:347:18:20:40.331 10676810 MP_OBSID 52258
LATEST OCAT INFO FOR OBSID 52258:
No ocat info found for obsid 52258
2014:347:20:15:17.107 10703646 MP_OBSID 52257
LATEST OCAT INFO FOR OBSID 52257:
No ocat info found for obsid 52257
2014:347:20:57:54.006 10713624 ACISPKT AA00000000
2014:347:20:57:54.006 10713624 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2014:347:20:57:58.006 10713640 ACISPKT AA00000000
2014:347:20:58:02.006 10713655 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:347:20:58:26.006 10713749 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2014:347:20:59:29.006 10713995 ACISPKT WBTX_QUIET
2014:347:20:59:33.006 10714010 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2014:347:20:59:37.006 10714026 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52257
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52257,OORMPDS,CSELFMT2,ENAB)
2014:347:20:59:41.006 10714042 ACISPKT RS_0000001
2014:347:20:59:45.006 10714057 ACISPKT RH_0000001
2014:347:21:00:08.006 10714147 ACISPKT RBTXINGALL
2014:347:23:44:33.006 10752645 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 347:20:57:54
from CRM file: XE1RADZ0 = 347:20:57:54
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2014:347:23:44:34.006 10752648 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2014:347:23:44:34.006 10752648 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2014:347:23:44:35.006 10752652 ACISPKT AA00000000
2014:347:23:44:39.006 10752668 ACISPKT AA00000000
2014:347:23:44:43.006 10752684 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2014:347:23:45:07.006 10752777 ACISPKT WSPOW1EC3F
==> WSPOW COMMAND LOADS: All Feps; I2 I3 S1 S2 S3 S4
2014:347:23:46:10.006 10753023 ACISPKT WT004A4034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a4034
fepCcdSelect = 2 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2014:347:23:46:14.006 10753039 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,52257,OORMPEN,CSELFMT2,ENAB)
2014:347:23:46:18.006 10753054 ACISPKT RS_0000001
2014:347:23:46:22.006 10753070 ACISPKT RH_0000001
2014:347:23:47:34.006 10753351 MP_OBSID 17473
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17473:
Target Name: Suzaku J1552+2739 SI Mode: TE_004A4
Instrument: ACIS-S Grating: NONE Type: GTO
Exposure Time: 85 Remaining Exposure time: 85
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17473
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A4B is WT004A4034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2014:347:23:50:10.440 10753961 SIMFOCUS -418
2014:347:23:51:38.300 10754304 SIMFOCUS -468
2014:348:23:46:15.006 11090213 ACISPKT AA00000000
==> ACIS integration time of 85.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 0 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
48 7 41 36 36 109
**NOTE: There are 6 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 1 1
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. There is no WBTX_QUIET command before loading the parameter block for a CTI measurement.
o. The OBSID change to 52271 that occurs less than 3 mins after a stop science.
o. An ACIS Hardware command is in the vehicle load. Check for SAR.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED