-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2015/JUN2115/oflsa/CR173_0607.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2015/JUN2115/oflsa/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (ACIS-S,HETG-OUT,LETG-OUT,17458,OORMPEN,CSELFMT2,ENAB)
2015:172:19:50:01.285 REAL-TIME COMM BEGINS 2015:172:15:50:01.285 EDT
2015:172:20:24:42.278 7659423 ACISPKT AA00000000
2015:172:20:24:42.278 7659423 SIMTRANS -99616 (HRC-S)
2015:172:20:27:42.278 7660125 MP_OBSID 51821
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51821:
No ocat info found for obsid 51821
2015:172:20:30:18.712 7660736 SIMFOCUS -991
2015:172:20:31:45.572 7661075 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2015:172:20:31:45.572 7661075 ACISPKT AA00000000
2015:172:20:31:49.572 7661090 ACISPKT AA00000000
2015:172:20:31:53.572 7661106 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:172:20:32:17.572 7661200 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:172:20:33:20.572 7661446 ACISPKT WBTX_QUIET
2015:172:20:33:24.572 7661461 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:172:20:33:28.572 7661477 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51821
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51821,OORMPDS,CSELFMT2,ENAB)
2015:172:20:33:32.572 7661492 ACISPKT RS_0000001
2015:172:20:33:36.572 7661508 ACISPKT RH_0000001
2015:172:20:33:59.572 7661598 ACISPKT RBTXINGALL
2015:172:20:36:15.572 7662128 MP_OBSID 51820
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51820:
No ocat info found for obsid 51820
2015:172:21:20:01.285 REAL-TIME COMM ENDS 2015:172:17:20:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:172:23:15:25.572 7699397 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:172:23:18:25.572 7700099 ACISPKT AA00000000
2015:172:23:18:25.572 7700099 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 172:23:18:25
from CRM file: EE1RADZ0 = 172:23:18:25
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:172:23:18:34.572 7700134 ACISPKT WSVIDALLDN
2015:172:23:19:37.572 7700380 ACISPKT RS_0000001
2015:172:23:20:57.746 7700693 MP_OBSID 51819
==> ObsID change occurs 2.5 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 51819:
No ocat info found for obsid 51819
2015:173:00:45:01.285 REAL-TIME COMM BEGINS 2015:173:20:45:01.285 EDT
2015:173:02:15:01.285 REAL-TIME COMM ENDS 2015:172:22:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:173:03:26:32.293 7741451 ORBPOINT EPERIGEE
2015:173:04:44:02.427 7776341 MP_OBSID 51818
LATEST OCAT INFO FOR OBSID 51818:
No ocat info found for obsid 51818
2015:173:07:00:23.530 7808267 MP_OBSID 51817
LATEST OCAT INFO FOR OBSID 51817:
No ocat info found for obsid 51817
2015:173:07:30:25.572 7815299 ACISPKT AA00000000
2015:173:07:30:25.572 7815299 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2015:173:07:30:29.572 7815315 ACISPKT AA00000000
2015:173:07:30:33.572 7815330 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:173:07:30:57.572 7815424 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:173:07:32:00.572 7815670 ACISPKT WBTX_QUIET
2015:173:07:32:04.572 7815685 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:173:07:32:08.572 7815701 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51817
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51817,OORMPDS,CSELFMT2,ENAB)
2015:173:07:32:12.572 7815717 ACISPKT RS_0000001
2015:173:07:32:16.572 7815732 ACISPKT RH_0000001
2015:173:07:32:39.572 7815822 ACISPKT RBTXINGALL
2015:173:10:17:04.572 7854320 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 173:07:30:25
from CRM file: XE1RADZ0 = 173:07:30:25
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:173:10:17:05.572 7854324 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2015:173:10:17:05.572 7854324 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:173:10:17:06.572 7854327 ACISPKT AA00000000
2015:173:10:17:10.572 7854343 ACISPKT AA00000000
2015:173:10:17:14.572 7854359 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:173:10:17:38.572 7854452 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2015:173:10:18:41.572 7854698 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:173:10:18:45.572 7854714 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51817,OORMPEN,CSELFMT2,ENAB)
2015:173:10:18:49.572 7854729 ACISPKT RS_0000001
2015:173:10:18:53.572 7854745 ACISPKT RH_0000001
2015:173:10:20:05.572 7855026 MP_OBSID 17064
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17064:
Target Name: UGC 1859 SI Mode: TE_00958
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17064
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:173:10:22:42.006 7855636 SIMFOCUS -418
2015:173:10:24:09.866 7855979 SIMFOCUS -468
2015:173:13:26:03.572 7898569 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:173:13:26:03.572 7898569 SIMTRANS 70608 (ACIS-S)
==> THERE IS A Z-SIM OF -12.61 mm FOR THIS OBSERVATION.
2015:173:13:29:03.572 7899272 COMMAND_HW CSELFMT4
2015:173:13:29:03.572 7899272 MP_OBSID 17696
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17696:
Target Name: v404 Cyg SI Mode: CC_0011A
Instrument: ACIS-S Grating: HETG Type: DDT
Exposure Time: 40 Remaining Exposure time: 40
Offset: Y: 0 Z: -0.3 Z-sim: -12.6
ACIS Exposure Mode: CC Event TM Format: G Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:173:13:29:37.911 7899406 COMMAND_SW 4OHETGIN
2015:173:13:33:21.372 7900278 COMMAND_HW CSELFMT2
2015:173:13:47:44.761 7903647 ACISPKT AA00000000
2015:173:13:47:48.761 7903663 ACISPKT AA00000000
2015:173:13:47:52.761 7903678 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:173:13:48:16.761 7903772 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:173:13:49:19.761 7904018 ACISPKT WC0011A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0011a024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_CC_MODE_EV3x3
bepPackingMode = 1 # BEP_CC_MODE_GRADED
recomputeBias = 1
trickleBias = 1
rowSum = 0
columnSum = 0
fep0SplitThreshold = 16 16 16 16
fep1SplitThreshold = 13 13 13 13
fep2SplitThreshold = 13 13 13 13
fep3SplitThreshold = 16 16 16 16
fep4SplitThreshold = 16 16 16 16
fep5SplitThreshold = 16 16 16 16
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:173:13:49:23.761 7904034 ACISPKT XCZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17696
---------------------------------------------------------------------------
==> Parameter Block for SI mode CC_0011AB is WC0011A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,17696,OORMPEN,CSELFMT2,ENAB)
2015:173:13:49:27.761 7904049 ACISPKT RS_0000001
2015:173:13:49:31.761 7904065 ACISPKT RH_0000001
2015:174:01:03:20.761 8061836 ACISPKT AA00000000
==> ACIS integration time of 40.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:174:01:03:20.761 8061836 SIMTRANS 73176 (ACIS-S)
==> THERE IS A Z-SIM OF -6.16 mm FOR THIS OBSERVATION.
2015:174:01:06:20.761 8062539 MP_OBSID 16689
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16689:
Target Name: V794 Aql SI Mode: TE_00C6A
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 100 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim: -6.14
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYN
Subarray Type: CUSTOM Start: 1 Rows: 512 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:174:01:09:48.741 8063351 ACISPKT AA00000000
2015:174:01:09:52.741 8063366 ACISPKT AA00000000
2015:174:01:09:56.741 8063382 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:174:01:10:20.741 8063475 ACISPKT WSPOW1F03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S0 S1 S2 S3 S4
2015:174:01:11:23.741 8063721 ACISPKT WT00C6A014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c6a014
fepCcdSelect = 10 7 5 6 8 4
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 511
primaryExposure = 17
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:174:01:11:27.741 8063737 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16689
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C6AB is WT00C6A014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,16689,OORMPEN,CSELFMT2,ENAB)
2015:174:01:11:31.741 8063752 ACISPKT RS_0000001
2015:174:01:11:35.741 8063768 ACISPKT RH_0000001
2015:174:11:10:48.902 8068389 ORBPOINT EAPOGEE
2015:175:04:58:19.741 8454028 ACISPKT AA00000000
==> ACIS integration time of 99.00 ks.
This is 99.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:175:04:58:19.741 8454028 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:175:05:01:19.741 8454730 COMMAND_HW CSELFMT4
2015:175:05:01:19.741 8454730 MP_OBSID 16575
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16575:
Target Name: XLSSJ020611.70-061134 SI Mode: TE_0046E
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: -1.4 Z: -0.25 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:175:05:01:54.080 8454864 COMMAND_SW 4OHETGRE
2015:175:05:05:37.541 8455736 COMMAND_HW CSELFMT2
2015:175:05:09:03.518 8456540 ACISPKT AA00000000
2015:175:05:09:07.518 8456555 ACISPKT AA00000000
2015:175:05:09:11.518 8456571 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:175:05:09:35.518 8456665 ACISPKT WSPOW0EC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S1 S2 S3
2015:175:05:10:38.518 8456911 ACISPKT WT0046E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046e034
fepCcdSelect = 10 7 5 6 3 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:175:05:10:42.518 8456926 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16575
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046EB is WT0046E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16575,OORMPEN,CSELFMT2,ENAB)
2015:175:05:10:46.518 8456942 ACISPKT RS_0000001
2015:175:05:10:50.518 8456957 ACISPKT RH_0000001
2015:175:06:56:40.518 8481738 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:175:06:59:40.518 8482440 MP_OBSID 17235
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17235:
Target Name: GRB150616A SI Mode: TE_004A4
Instrument: ACIS-S Grating: NONE Type: TOO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:175:07:04:25.793 8483554 ACISPKT AA00000000
2015:175:07:04:29.793 8483569 ACISPKT AA00000000
2015:175:07:04:33.793 8483585 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:175:07:04:57.793 8483679 ACISPKT WSPOW1EC3F
==> WSPOW COMMAND LOADS: All Feps; I2 I3 S1 S2 S3 S4
2015:175:07:06:00.793 8483924 ACISPKT WT004A4034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a4034
fepCcdSelect = 2 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:175:07:06:04.793 8483940 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17235
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A4B is WT004A4034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17235,OORMPEN,CSELFMT2,ENAB)
2015:175:07:06:08.793 8483956 ACISPKT RS_0000001
2015:175:07:06:12.793 8483971 ACISPKT RH_0000001
2015:175:11:45:43.188 8549417 ACISPKT AA00000000
==> ACIS integration time of 15.38 ks.
This is 102.52% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:175:11:45:43.188 8549417 SIMTRANS -99616 (HRC-S)
2015:175:11:48:43.188 8550119 MP_OBSID 51816
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51816:
No ocat info found for obsid 51816
2015:175:11:51:19.622 8550730 SIMFOCUS -991
2015:175:11:52:46.482 8551069 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2015:175:11:52:46.482 8551069 ACISPKT AA00000000
2015:175:11:52:50.482 8551084 ACISPKT AA00000000
2015:175:11:52:54.482 8551100 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:175:11:53:18.482 8551193 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:175:11:54:21.482 8551439 ACISPKT WBTX_QUIET
2015:175:11:54:25.482 8551455 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:175:11:54:29.482 8551470 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51816
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51816,OORMPDS,CSELFMT2,ENAB)
2015:175:11:54:33.482 8551486 ACISPKT RS_0000001
2015:175:11:54:37.482 8551502 ACISPKT RH_0000001
2015:175:11:55:00.482 8551591 ACISPKT RBTXINGALL
2015:175:11:57:16.482 8552122 MP_OBSID 51815
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51815:
No ocat info found for obsid 51815
2015:175:14:36:26.482 8589390 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:175:14:39:26.482 8590093 ACISPKT AA00000000
2015:175:14:39:26.482 8590093 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 175:14:39:26
from CRM file: EE1RADZ0 = 175:14:39:26
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:175:14:39:35.482 8590128 ACISPKT WSVIDALLDN
2015:175:14:40:38.482 8590374 ACISPKT RS_0000001
2015:175:14:43:01.761 8590933 MP_OBSID 51814
==> ObsID change occurs 3.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51814:
No ocat info found for obsid 51814
2015:175:18:55:07.014 8598294 ORBPOINT EPERIGEE
2015:175:22:10:50.824 8695788 MP_OBSID 51813
LATEST OCAT INFO FOR OBSID 51813:
No ocat info found for obsid 51813
2015:175:23:27:36.873 8713763 MP_OBSID 51812
LATEST OCAT INFO FOR OBSID 51812:
No ocat info found for obsid 51812
2015:175:23:45:26.482 8717937 ACISPKT AA00000000
2015:175:23:45:26.482 8717937 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2015:175:23:45:30.482 8717952 ACISPKT AA00000000
2015:175:23:45:34.482 8717968 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:175:23:45:58.482 8718062 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:175:23:47:01.482 8718308 ACISPKT WBTX_QUIET
2015:175:23:47:05.482 8718323 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:175:23:47:09.482 8718339 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51812
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51812,OORMPDS,CSELFMT2,ENAB)
2015:175:23:47:13.482 8718354 ACISPKT RS_0000001
2015:175:23:47:17.482 8718370 ACISPKT RH_0000001
2015:175:23:47:40.482 8718460 ACISPKT RBTXINGALL
2015:176:02:32:05.482 8756957 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 175:23:45:26
from CRM file: XE1RADZ0 = 175:23:45:26
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:176:02:32:06.482 8756961 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2015:176:02:32:06.482 8756961 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:176:02:35:06.482 8757664 MP_OBSID 17322
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17322:
Target Name: GJ436 SI Mode: TE_00C34
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.25 Range: 10
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:176:02:37:42.916 8758274 SIMFOCUS -418
2015:176:02:39:10.776 8758617 SIMFOCUS -468
2015:176:02:39:28.176 8758685 AODSDITH AODSDITH
==> DITHER DISABLED
2015:176:02:45:28.176 8760090 AOENDITH AOENDITH
==> DITHER ENABLED
2015:176:02:46:07.482 8760243 ACISPKT AA00000000
2015:176:02:46:11.482 8760259 ACISPKT AA00000000
2015:176:02:46:15.482 8760274 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:176:02:46:39.482 8760368 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2015:176:02:47:42.482 8760614 ACISPKT WT00C34014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c34014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 21
eventAmplitudeRange = 2500
windowSlotIndex = 65535
2015:176:02:47:46.482 8760629 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17322
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C34B is WT00C34014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17322,OORMPEN,CSELFMT2,ENAB)
2015:176:02:47:50.482 8760645 ACISPKT RS_0000001
2015:176:02:47:54.482 8760661 ACISPKT RH_0000001
2015:176:05:34:50.482 8799748 ACISPKT AA00000000
==> ACIS integration time of 9.16 ks.
This is 91.60% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:176:05:37:50.482 8800450 MP_OBSID 16952
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16952:
Target Name: RCW 86 NE SI Mode: TE_0045A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 70 Remaining Exposure time: 2
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:176:05:47:49.542 8802788 ACISPKT AA00000000
2015:176:05:47:53.542 8802803 ACISPKT AA00000000
2015:176:05:47:57.542 8802819 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:176:05:48:21.542 8802913 ACISPKT WSPOW1E83E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I3 S1 S2 S3 S4
2015:176:05:49:24.542 8803158 ACISPKT WT0045A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0045a034
fepCcdSelect = 10 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:176:05:49:28.542 8803174 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16952
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0045AB is WT0045A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16952,OORMPEN,CSELFMT2,ENAB)
2015:176:05:49:32.542 8803190 ACISPKT RS_0000001
2015:176:05:49:36.542 8803205 ACISPKT RH_0000001
2015:177:01:05:26.542 9073839 ACISPKT AA00000000
==> ACIS integration time of 68.00 ks.
This is 97.14% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:177:01:08:26.542 9074542 MP_OBSID 17321
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17321:
Target Name: GJ436 SI Mode: TE_00C34
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.25 Range: 10
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:177:01:22:38.750 9077868 ACISPKT AA00000000
2015:177:01:22:42.750 9077883 ACISPKT AA00000000
2015:177:01:22:46.750 9077899 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:177:01:23:10.750 9077992 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2015:177:01:24:13.750 9078238 ACISPKT WT00C34014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c34014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 21
eventAmplitudeRange = 2500
windowSlotIndex = 65535
2015:177:01:24:17.750 9078254 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17321
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C34B is WT00C34014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17321,OORMPEN,CSELFMT2,ENAB)
2015:177:01:24:21.750 9078270 ACISPKT RS_0000001
2015:177:01:24:25.750 9078285 ACISPKT RH_0000001
2015:177:01:37:11.750 9081274 AODSDITH AODSDITH
==> DITHER DISABLED
2015:177:01:43:11.750 9082679 AOENDITH AOENDITH
==> DITHER ENABLED
2015:177:02:39:37.825 9095891 ORBPOINT EAPOGEE
2015:177:07:16:01.750 9160611 ACISPKT AA00000000
==> ACIS integration time of 20.24 ks.
This is 101.20% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:177:07:19:01.750 9161313 MP_OBSID 17152
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17152:
Target Name: NGC 5903 SI Mode: TE_0075A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 69 Remaining Exposure time: 1.050715
Offset: Y: -2.5 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12.9
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:177:07:23:32.887 9162372 ACISPKT AA00000000
2015:177:07:23:36.887 9162387 ACISPKT AA00000000
2015:177:07:23:40.887 9162403 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:177:07:24:04.887 9162496 ACISPKT WSPOW1E83E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I3 S1 S2 S3 S4
2015:177:07:25:07.887 9162742 ACISPKT WT0075A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0075a024
fepCcdSelect = 10 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3225
windowSlotIndex = 65535
2015:177:07:25:11.887 9162758 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17152
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0075AB is WT0075A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17152,OORMPEN,CSELFMT2,ENAB)
2015:177:07:25:15.887 9162773 ACISPKT RS_0000001
2015:177:07:25:19.887 9162789 ACISPKT RH_0000001
2015:178:02:40:19.172 9433225 ACISPKT AA00000000
==> ACIS integration time of 67.95 ks.
This is 98.48% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:178:02:40:19.172 9433225 SIMTRANS -99616 (HRC-S)
2015:178:02:43:19.172 9433928 MP_OBSID 51811
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51811:
No ocat info found for obsid 51811
2015:178:02:45:55.606 9434538 SIMFOCUS -991
2015:178:02:47:22.466 9434877 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2015:178:02:47:22.466 9434877 ACISPKT AA00000000
2015:178:02:47:26.466 9434893 ACISPKT AA00000000
2015:178:02:47:30.466 9434908 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:178:02:47:54.466 9435002 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:178:02:48:57.466 9435248 ACISPKT WBTX_QUIET
2015:178:02:49:01.466 9435264 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:178:02:49:05.466 9435279 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51811
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51811,OORMPDS,CSELFMT2,ENAB)
2015:178:02:49:09.466 9435295 ACISPKT RS_0000001
2015:178:02:49:13.466 9435310 ACISPKT RH_0000001
2015:178:02:49:36.466 9435400 ACISPKT RBTXINGALL
2015:178:02:51:52.466 9435931 MP_OBSID 51810
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51810:
No ocat info found for obsid 51810
2015:178:05:31:02.466 9473199 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:178:05:34:02.466 9473902 ACISPKT AA00000000
2015:178:05:34:02.466 9473902 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 178:05:34:02
from CRM file: EE1RADZ0 = 178:05:34:02
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:178:05:34:11.466 9473937 ACISPKT WSVIDALLDN
2015:178:05:34:54.983 9474107 MP_OBSID 51809
==> ObsID change occurs 0.9 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 51809:
No ocat info found for obsid 51809
2015:178:05:35:14.466 9474183 ACISPKT RS_0000001
2015:178:08:57:30.794 9521544 MP_OBSID 51808
LATEST OCAT INFO FOR OBSID 51808:
No ocat info found for obsid 51808
2015:178:10:09:28.444 9538393 MP_OBSID 51807
LATEST OCAT INFO FOR OBSID 51807:
No ocat info found for obsid 51807
2015:178:10:24:26.115 9538445 ORBPOINT EPERIGEE
2015:178:14:32:04.205 9599879 MP_OBSID 51806
LATEST OCAT INFO FOR OBSID 51806:
No ocat info found for obsid 51806
2015:178:15:10:02.466 9608770 ACISPKT AA00000000
2015:178:15:10:02.466 9608770 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2015:178:15:10:06.466 9608785 ACISPKT AA00000000
2015:178:15:10:10.466 9608801 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:178:15:10:34.466 9608895 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:178:15:11:37.466 9609141 ACISPKT WBTX_QUIET
2015:178:15:11:41.466 9609156 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:178:15:11:45.466 9609172 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51806
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51806,OORMPDS,CSELFMT2,ENAB)
2015:178:15:11:49.466 9609187 ACISPKT RS_0000001
2015:178:15:11:53.466 9609203 ACISPKT RH_0000001
2015:178:15:12:16.466 9609293 ACISPKT RBTXINGALL
2015:178:17:56:41.466 9647790 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 178:15:10:02
from CRM file: XE1RADZ0 = 178:15:10:02
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:178:17:56:42.466 9647794 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2015:178:17:56:42.466 9647794 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:178:17:56:43.466 9647798 ACISPKT AA00000000
2015:178:17:56:47.466 9647814 ACISPKT AA00000000
2015:178:17:56:51.466 9647829 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:178:17:57:15.466 9647923 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2015:178:17:58:18.466 9648169 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:178:17:58:22.466 9648184 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51806,OORMPEN,CSELFMT2,ENAB)
2015:178:17:58:26.466 9648200 ACISPKT RS_0000001
2015:178:17:58:30.466 9648216 ACISPKT RH_0000001
2015:178:17:59:42.466 9648497 MP_OBSID 16754
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16754:
Target Name: [HP99] 456 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 29 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 16754
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:178:18:02:18.900 9649107 SIMFOCUS -418
2015:178:18:03:46.760 9649450 SIMFOCUS -468
2015:179:02:22:20.466 9766186 ACISPKT AA00000000
==> ACIS integration time of 29.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:179:02:25:20.466 9766889 MP_OBSID 17674
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17674:
Target Name: NGC 5903 SI Mode: TE_0075A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 86 Remaining Exposure time: -3
Offset: Y: -2.5 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12.9
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:179:02:35:20.566 9769231 ACISPKT AA00000000
2015:179:02:35:24.566 9769246 ACISPKT AA00000000
2015:179:02:35:28.566 9769262 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:179:02:35:52.566 9769356 ACISPKT WSPOW1E83E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I3 S1 S2 S3 S4
2015:179:02:36:55.566 9769601 ACISPKT WT0075A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0075a024
fepCcdSelect = 10 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3225
windowSlotIndex = 65535
2015:179:02:36:59.566 9769617 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17674
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0075AB is WT0075A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17674,OORMPEN,CSELFMT2,ENAB)
2015:179:02:37:03.566 9769633 ACISPKT RS_0000001
2015:179:02:37:07.566 9769648 ACISPKT RH_0000001
2015:179:18:08:47.223 9987793 ORBPOINT EAPOGEE
2015:180:03:42:57.566 10122234 ACISPKT AA00000000
==> ACIS integration time of 89.00 ks.
This is 103.49% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:180:03:45:57.566 10122936 MP_OBSID 17045
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17045:
Target Name: SDSS J1034+0720 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 4 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:180:03:54:28.222 10124929 ACISPKT AA00000000
2015:180:03:54:32.222 10124944 ACISPKT AA00000000
2015:180:03:54:36.222 10124960 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:180:03:55:00.222 10125054 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2015:180:03:56:03.222 10125300 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:180:03:56:07.222 10125315 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17045
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17045,OORMPEN,CSELFMT2,ENAB)
2015:180:03:56:11.222 10125331 ACISPKT RS_0000001
2015:180:03:56:15.222 10125346 ACISPKT RH_0000001
2015:180:05:22:01.222 10145428 ACISPKT AA00000000
==> ACIS integration time of 4.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:180:05:25:01.222 10146131 MP_OBSID 17073
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17073:
Target Name: Mrk 22 SI Mode: TE_00C2C
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:180:05:35:48.062 10148655 ACISPKT AA00000000
2015:180:05:35:52.062 10148671 ACISPKT AA00000000
2015:180:05:35:56.062 10148686 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:180:05:36:20.062 10148780 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2015:180:05:37:23.062 10149026 ACISPKT WT00C2C014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c2c014
fepCcdSelect = 10 7 6 8 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 6
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:180:05:37:27.062 10149041 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17073
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C2CB is WT00C2C014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17073,OORMPEN,CSELFMT2,ENAB)
2015:180:05:37:31.062 10149057 ACISPKT RS_0000001
2015:180:05:37:35.062 10149073 ACISPKT RH_0000001
2015:180:08:37:41.062 10191242 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:180:08:37:41.062 10191242 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:180:08:39:40.238 10191707 SIMFOCUS -536
2015:180:08:40:41.062 10191945 MP_OBSID 17671
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17671:
Target Name: Abell1882 - Filament #2 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 35 Remaining Exposure time: -0.154847000000004
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:180:08:48:16.338 10193722 ACISPKT AA00000000
2015:180:08:48:20.338 10193737 ACISPKT AA00000000
2015:180:08:48:24.338 10193753 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:180:08:48:48.338 10193846 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:180:08:49:51.338 10194092 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:180:08:49:55.338 10194108 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17671
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17671,OORMPEN,CSELFMT2,ENAB)
2015:180:08:49:59.338 10194123 ACISPKT RS_0000001
2015:180:08:50:03.338 10194139 ACISPKT RH_0000001
2015:180:18:56:28.185 10336129 ACISPKT AA00000000
==> ACIS integration time of 35.15 ks.
This is 100.44% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:180:18:56:28.185 10336129 SIMTRANS -99616 (HRC-S)
2015:180:18:59:28.185 10336831 MP_OBSID 51805
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51805:
No ocat info found for obsid 51805
2015:180:19:02:28.395 10337534 SIMFOCUS -991
2015:180:19:03:53.895 10337868 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2015:180:19:03:53.895 10337868 ACISPKT AA00000000
2015:180:19:03:57.895 10337884 ACISPKT AA00000000
2015:180:19:04:01.895 10337899 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:180:19:04:25.895 10337993 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:180:19:05:28.895 10338239 ACISPKT WBTX_QUIET
2015:180:19:05:32.895 10338254 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:180:19:05:36.895 10338270 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51805
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51805,OORMPDS,CSELFMT2,ENAB)
2015:180:19:05:40.895 10338286 ACISPKT RS_0000001
2015:180:19:05:44.895 10338301 ACISPKT RH_0000001
2015:180:19:06:07.895 10338391 ACISPKT RBTXINGALL
2015:180:19:08:23.895 10338922 MP_OBSID 51804
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51804:
No ocat info found for obsid 51804
2015:180:21:47:33.895 10376190 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:180:21:50:33.895 10376892 ACISPKT AA00000000
2015:180:21:50:33.895 10376892 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 180:21:50:33
from CRM file: EE1RADZ0 = 180:21:50:33
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:180:21:50:42.895 10376928 ACISPKT WSVIDALLDN
2015:180:21:51:45.895 10377173 ACISPKT RS_0000001
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 2 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
32 4 25 21 21 68
**NOTE: There are 3 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 1 1
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. The OBSID change to 51819 that occurs less than 3 mins after a stop science.
o. The OBSID change to 51809 that occurs less than 3 mins after a stop science.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED