-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2015/MAR0915/oflsa/CR067_0405.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2015/FEB2815/ofls/ACIS-History.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-OUT,LETG-OUT,52029,OORMPDS,CSELFMT2,ENAB)
2015:067:04:46:00.000 5591136 MP_OBSID 52028
LATEST OCAT INFO FOR OBSID 52028:
No ocat info found for obsid 52028
2015:067:06:18:30.414 5612796 MP_OBSID 52027
LATEST OCAT INFO FOR OBSID 52027:
No ocat info found for obsid 52027
2015:067:08:32:22.981 5619791 ORBPOINT EPERIGEE
>>>WARNING: No EEF1000 seen before EPERIGEE. Is the load starting in the belts?
2015:067:11:02:38.373 5679325 MP_OBSID 52026
LATEST OCAT INFO FOR OBSID 52026:
No ocat info found for obsid 52026
2015:067:12:26:05.215 5698863 MP_OBSID 52025
LATEST OCAT INFO FOR OBSID 52025:
No ocat info found for obsid 52025
2015:067:12:30:01.285 REAL-TIME COMM BEGINS 2015:067:08:30:01.285 EDT
2015:067:12:30:37.500 5699926 ACISPKT AA00000000
2015:067:12:30:37.500 5699926 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2015:067:12:30:41.500 5699942 ACISPKT AA00000000
2015:067:12:30:45.500 5699957 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:067:12:31:09.500 5700051 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:067:12:32:12.500 5700297 ACISPKT WBTX_QUIET
2015:067:12:32:16.500 5700312 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:067:12:32:20.500 5700328 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52025
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52025,OORMPDS,CSELFMT2,ENAB)
2015:067:12:32:24.500 5700344 ACISPKT RS_0000001
2015:067:12:32:28.500 5700359 ACISPKT RH_0000001
2015:067:12:32:51.500 5700449 ACISPKT RBTXINGALL
2015:067:14:00:01.285 REAL-TIME COMM ENDS 2015:067:10:00:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:067:14:50:57.500 5732785 COMMAND_SW OORMPEN
==> Exit leg pad time is 8.42 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 067:12:30:37
from CRM file: XE1RADZ0 = 067:12:30:37
==> CRM Pad Time: 8.421 ks and Backstop Pad Time: 8.42 ks agree.
2015:067:14:50:58.500 5732788 ACISPKT AA00000000
==> ACIS integration time of 6.92 ks.
2015:067:14:50:58.500 5732788 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:067:14:50:59.500 5732792 ACISPKT AA00000000
2015:067:14:51:03.500 5732808 ACISPKT AA00000000
2015:067:14:51:07.500 5732824 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:067:14:51:31.500 5732917 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:067:14:52:34.500 5733163 ACISPKT WT0046C034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046c034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:067:14:52:38.500 5733179 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,52025,OORMPEN,CSELFMT2,ENAB)
2015:067:14:52:42.500 5733194 ACISPKT RS_0000001
2015:067:14:52:46.500 5733210 ACISPKT RH_0000001
2015:067:14:53:58.500 5733491 MP_OBSID 17206
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17206:
Target Name: CIZA J2242.8+4301 SOUTH SI Mode: TE_0046C
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 6.5 Remaining Exposure time: 6.5
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17206
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046CB is WT0046C034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:067:14:56:58.710 5734194 SIMFOCUS -486
2015:067:14:58:25.210 5734532 SIMFOCUS -536
2015:067:17:04:19.500 5764012 ACISPKT AA00000000
==> ACIS integration time of 6.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:067:17:04:19.500 5764012 SIMTRANS -50504 (HRC-I)
2015:067:17:07:19.500 5764714 COMMAND_HW CSELFMT1
2015:067:17:07:19.500 5764714 MP_OBSID 17372
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17372:
No ACIS info found for obsid 17372.
This is an HRC-I observation.
==> NIL SI_Mode is HIE_0002
2015:067:17:09:12.163 5765154 SIMFOCUS -716
2015:067:17:09:47.206 5765291 ACISPKT WSVIDALLDN
2015:067:17:10:05.206 5765361 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2015:067:17:11:08.206 5765607 ACISPKT RS_0000001
2015:067:17:11:12.206 5765622 ACISPKT RH_0000001
2015:067:17:11:35.206 5765712 ACISPKT WT00452024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00452024
fepCcdSelect = 10 0 1 2 3 7
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
2015:067:17:11:39.206 5765728 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17372
---------------------------------------------------------------------------
==> Parameter Block for SI mode HIE_0002B is WT00452024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,17372,OORMPEN,CSELFMT1,ENAB)
2015:067:17:12:59.206 5766040 AOENDITH AOENDITH
==> DITHER ENABLED
2015:067:18:39:49.206 5786372 ACISPKT AA00000000
==> ACIS integration time of 4.63 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:067:18:42:49.206 5787074 COMMAND_HW CSELFMT2
2015:067:18:42:49.206 5787074 MP_OBSID 17623
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17623:
Target Name: Abell 1795 outskirts SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 60 Remaining Exposure time: 60
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:067:18:42:49.206 5787074 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:067:18:47:41.869 5788216 SIMFOCUS -486
2015:067:18:49:02.869 5788532 SIMFOCUS -536
2015:067:18:54:33.481 5789823 ACISPKT AA00000000
2015:067:18:54:37.481 5789838 ACISPKT AA00000000
2015:067:18:54:41.481 5789854 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:067:18:55:05.481 5789947 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2015:067:18:56:08.481 5790193 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:067:18:56:12.481 5790209 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17623
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17623,OORMPEN,CSELFMT2,ENAB)
2015:067:18:56:16.481 5790225 ACISPKT RS_0000001
2015:067:18:56:20.481 5790240 ACISPKT RH_0000001
2015:067:19:12:20.481 5793986 AOENDITH AOENDITH
==> DITHER ENABLED
2015:068:03:55:01.285 REAL-TIME COMM BEGINS 2015:67:23:55:01.285 EDT
2015:068:06:45:01.285 REAL-TIME COMM ENDS 2015:068:02:45:01.285 EDT
==> COMM DURATION: 170.00 mins.
2015:068:11:58:50.481 6029655 ACISPKT AA00000000
==> ACIS integration time of 60.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:068:11:58:50.481 6029655 SIMTRANS -50504 (HRC-I)
2015:068:12:01:50.481 6030357 COMMAND_HW CSELFMT4
2015:068:12:01:50.481 6030357 MP_OBSID 17378
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17378:
No ACIS info found for obsid 17378.
This is an HRC-I observation.
2015:068:12:02:24.820 6030491 COMMAND_SW 4OLETGIN
2015:068:12:03:43.144 6030797 SIMFOCUS -716
2015:068:12:06:08.281 6031363 COMMAND_HW CSELFMT1
2015:068:12:06:20.864 6031412 AOENDITH AOENDITH
==> DITHER ENABLED
2015:068:12:46:10.864 6040739 COMMAND_HW CSELFMT4
2015:068:12:46:10.864 6040739 MP_OBSID 17126
LATEST OCAT INFO FOR OBSID 17126:
Target Name: NGC 4968 SI Mode: TE_00958
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:068:12:46:10.864 6040739 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:068:12:46:45.203 6040873 COMMAND_SW 4OLETGRE
2015:068:12:50:28.664 6041745 COMMAND_HW CSELFMT2
2015:068:12:50:39.751 6041788 SIMFOCUS -418
2015:068:12:52:02.111 6042110 SIMFOCUS -468
2015:068:12:59:52.185 6043944 ACISPKT AA00000000
2015:068:12:59:56.185 6043960 ACISPKT AA00000000
2015:068:13:00:00.185 6043976 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:068:13:00:24.185 6044069 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2015:068:13:01:27.185 6044315 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:068:13:01:31.185 6044331 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17126
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17126,OORMPEN,CSELFMT2,ENAB)
2015:068:13:01:35.185 6044346 ACISPKT RS_0000001
2015:068:13:01:39.185 6044362 ACISPKT RH_0000001
2015:068:13:15:39.185 6047640 AOENDITH AOENDITH
==> DITHER ENABLED
2015:068:16:16:56.753 6089903 ORBPOINT EAPOGEE
2015:068:20:40:01.285 REAL-TIME COMM BEGINS 2015:068:16:40:01.285 EDT
2015:068:23:10:01.285 REAL-TIME COMM ENDS 2015:068:19:10:01.285 EDT
==> COMM DURATION: 150.00 mins.
2015:069:03:15:29.185 6244284 ACISPKT AA00000000
==> ACIS integration time of 50.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:069:03:18:29.185 6244986 MP_OBSID 17568
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17568:
Target Name: Abell 1664 SI Mode: TE_0046E
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 46 Remaining Exposure time: 46
Offset: Y: -1 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2015:069:03:18:29.185 6244986 ACISPKT AA00000000
2015:069:03:18:33.185 6245002 ACISPKT AA00000000
2015:069:03:18:37.185 6245017 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:069:03:19:01.185 6245111 ACISPKT WSPOW0EC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S1 S2 S3
2015:069:03:20:04.185 6245357 ACISPKT WT0046E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046e034
fepCcdSelect = 10 7 5 6 3 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:069:03:20:08.185 6245373 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17568
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046EB is WT0046E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17568,OORMPEN,CSELFMT2,ENAB)
2015:069:03:20:12.185 6245388 ACISPKT RS_0000001
2015:069:03:20:16.185 6245404 ACISPKT RH_0000001
2015:069:03:40:01.285 REAL-TIME COMM BEGINS 2015:68:23:40:01.285 EDT
2015:069:05:10:01.285 REAL-TIME COMM ENDS 2015:069:01:10:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:069:11:10:01.285 REAL-TIME COMM BEGINS 2015:069:07:10:01.285 EDT
2015:069:12:40:01.285 REAL-TIME COMM ENDS 2015:069:08:40:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:069:16:41:52.053 6433095 ACISPKT AA00000000
==> ACIS integration time of 46.75 ks.
This is 101.62% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:069:16:41:52.053 6433095 SIMTRANS -99616 (HRC-S)
2015:069:16:44:52.053 6433797 MP_OBSID 52024
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52024:
No ocat info found for obsid 52024
2015:069:16:47:28.487 6434408 SIMFOCUS -991
2015:069:16:48:55.347 6434747 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2015:069:16:48:55.347 6434747 ACISPKT AA00000000
2015:069:16:48:59.347 6434762 ACISPKT AA00000000
2015:069:16:49:03.347 6434778 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:069:16:49:27.347 6434872 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:069:16:50:30.347 6435118 ACISPKT WBTX_QUIET
2015:069:16:50:34.347 6435133 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:069:16:50:38.347 6435149 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52024
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52024,OORMPDS,CSELFMT2,ENAB)
2015:069:16:50:42.347 6435164 ACISPKT RS_0000001
2015:069:16:50:46.347 6435180 ACISPKT RH_0000001
2015:069:16:51:09.347 6435270 ACISPKT RBTXINGALL
2015:069:16:53:25.347 6435801 MP_OBSID 52023
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52023:
No ocat info found for obsid 52023
2015:069:19:32:35.347 6473069 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:069:19:35:35.347 6473771 ACISPKT AA00000000
2015:069:19:35:35.347 6473771 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 069:19:35:35
from CRM file: EE1RADZ0 = 069:19:35:35
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:069:19:35:44.347 6473806 ACISPKT WSVIDALLDN
2015:069:19:36:47.347 6474052 ACISPKT RS_0000001
2015:069:20:50:01.285 REAL-TIME COMM BEGINS 2015:069:16:50:01.285 EDT
2015:069:22:20:01.285 REAL-TIME COMM ENDS 2015:069:18:20:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:070:00:00:00.000 6535682 COMMAND_HW 1HHTRBEN
2015:070:00:00:01.000 6535686 COMMAND_HW 1HHTRBON
2015:070:00:01:12.832 6535686 ORBPOINT EPERIGEE
2015:070:04:15:01.285 REAL-TIME COMM BEGINS 2015:070:00:15:01.285 EDT
2015:070:04:43:35.347 6602083 MP_OBSID 52022
LATEST OCAT INFO FOR OBSID 52022:
No ocat info found for obsid 52022
2015:070:04:43:35.347 6602083 ACISPKT AA00000000
2015:070:04:43:35.347 6602083 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2015:070:04:43:39.347 6602099 ACISPKT AA00000000
2015:070:04:43:43.347 6602115 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:070:04:44:07.347 6602208 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:070:04:45:10.347 6602454 ACISPKT WBTX_QUIET
2015:070:04:45:14.347 6602470 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:070:04:45:18.347 6602485 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52022
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52022,OORMPDS,CSELFMT2,ENAB)
2015:070:04:45:22.347 6602501 ACISPKT RS_0000001
2015:070:04:45:26.347 6602517 ACISPKT RH_0000001
2015:070:04:45:49.347 6602606 ACISPKT RBTXINGALL
2015:070:05:30:01.285 REAL-TIME COMM ENDS 2015:070:01:30:01.285 EDT
==> COMM DURATION: 75.00 mins.
2015:070:06:25:55.347 6626044 COMMAND_SW OORMPEN
==> Exit leg pad time is 6.14 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 070:04:43:35
from CRM file: XE1RADZ0 = 070:04:43:35
==> CRM Pad Time: 6.141 ks and Backstop Pad Time: 6.14 ks agree.
2015:070:06:25:56.347 6626048 ACISPKT AA00000000
==> ACIS integration time of 4.64 ks.
2015:070:06:25:56.347 6626048 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:070:06:25:57.347 6626052 ACISPKT AA00000000
2015:070:06:26:01.347 6626068 ACISPKT AA00000000
2015:070:06:26:05.347 6626083 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:070:06:26:29.347 6626177 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2015:070:06:27:32.347 6626423 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:070:06:27:36.347 6626439 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,52022,OORMPEN,CSELFMT2,ENAB)
2015:070:06:27:40.347 6626454 ACISPKT RS_0000001
2015:070:06:27:44.347 6626470 ACISPKT RH_0000001
2015:070:06:28:56.347 6626751 MP_OBSID 17174
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17174:
Target Name: ZwCl 1234.0+02916 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 180 Remaining Exposure time: 180
Offset: Y: -1 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17174
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:070:06:31:32.781 6627361 SIMFOCUS -418
2015:070:06:33:00.641 6627704 SIMFOCUS -468
2015:070:11:55:01.285 REAL-TIME COMM BEGINS 2015:070:07:55:01.285 EDT
2015:070:13:25:01.285 REAL-TIME COMM ENDS 2015:070:09:25:01.285 EDT
==> COMM DURATION: 90.00 mins.
2015:071:07:45:37.501 6981670 ORBPOINT EAPOGEE
2015:072:07:58:50.308 7322142 ACISPKT AA00000000
==> ACIS integration time of 177.04 ks.
This is 98.35% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:072:07:58:50.308 7322142 SIMTRANS -99616 (HRC-S)
2015:072:08:01:50.308 7322844 MP_OBSID 52021
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52021:
No ocat info found for obsid 52021
2015:072:08:04:26.742 7323455 SIMFOCUS -991
2015:072:08:05:53.602 7323794 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2015:072:08:05:53.602 7323794 ACISPKT AA00000000
2015:072:08:05:57.602 7323809 ACISPKT AA00000000
2015:072:08:06:01.602 7323825 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:072:08:06:25.602 7323919 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:072:08:07:28.602 7324164 ACISPKT WBTX_QUIET
2015:072:08:07:32.602 7324180 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:072:08:07:36.602 7324196 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52021
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52021,OORMPDS,CSELFMT2,ENAB)
2015:072:08:07:40.602 7324211 ACISPKT RS_0000001
2015:072:08:07:44.602 7324227 ACISPKT RH_0000001
2015:072:08:08:07.602 7324317 ACISPKT RBTXINGALL
2015:072:08:12:43.733 7325394 MP_OBSID 52020
==> ObsID change occurs 6.8 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52020:
No ocat info found for obsid 52020
2015:072:10:49:33.602 7362116 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:072:10:52:33.602 7362818 ACISPKT AA00000000
2015:072:10:52:33.602 7362818 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 072:10:52:33
from CRM file: EE1RADZ0 = 072:10:52:33
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:072:10:52:42.602 7362853 ACISPKT WSVIDALLDN
2015:072:10:53:45.602 7363099 ACISPKT RS_0000001
2015:072:15:26:50.548 7427040 MP_OBSID 52019
LATEST OCAT INFO FOR OBSID 52019:
No ocat info found for obsid 52019
>>>WARNING: An ACIS Hardware command is in the vehicle load. Check for SAR.
2015:072:15:30:00.000 7427780 COMMAND_HW 1HHTRBOF
>>>WARNING: An ACIS Hardware command is in the vehicle load. Check for SAR.
2015:072:15:30:01.000 7427784 COMMAND_HW 1HHTRBDS
2015:072:15:30:28.893 7427784 ORBPOINT EPERIGEE
2015:072:15:31:00.000 7428014 COMMAND_HW 1HHTRBOF
2015:072:15:31:01.000 7428018 COMMAND_HW 1HHTRBDS
2015:072:19:38:33.602 7485979 MP_OBSID 52018
LATEST OCAT INFO FOR OBSID 52018:
No ocat info found for obsid 52018
2015:072:19:38:33.602 7485979 ACISPKT AA00000000
2015:072:19:38:33.602 7485979 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2015:072:19:38:37.602 7485995 ACISPKT AA00000000
2015:072:19:38:41.602 7486010 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:072:19:39:05.602 7486104 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:072:19:40:08.602 7486350 ACISPKT WBTX_QUIET
2015:072:19:40:12.602 7486365 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:072:19:40:16.602 7486381 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52018
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52018,OORMPDS,CSELFMT2,ENAB)
2015:072:19:40:20.602 7486397 ACISPKT RS_0000001
2015:072:19:40:24.602 7486412 ACISPKT RH_0000001
2015:072:19:40:47.602 7486502 ACISPKT RBTXINGALL
2015:072:22:10:53.602 7521647 COMMAND_SW OORMPEN
==> Exit leg pad time is 9.14 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 072:19:38:33
from CRM file: XE1RADZ0 = 072:19:38:33
==> CRM Pad Time: 9.141 ks and Backstop Pad Time: 9.14 ks agree.
2015:072:22:10:54.602 7521651 ACISPKT AA00000000
==> ACIS integration time of 7.64 ks.
2015:072:22:10:54.602 7521651 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:072:22:10:55.602 7521655 ACISPKT AA00000000
2015:072:22:10:59.602 7521671 ACISPKT AA00000000
2015:072:22:11:03.602 7521686 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:072:22:11:27.602 7521780 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2015:072:22:12:30.602 7522026 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:072:22:12:34.602 7522041 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,52018,OORMPEN,CSELFMT2,ENAB)
2015:072:22:12:38.602 7522057 ACISPKT RS_0000001
2015:072:22:12:42.602 7522073 ACISPKT RH_0000001
2015:072:22:13:54.602 7522354 MP_OBSID 17062
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17062:
Target Name: NGC 5133 SI Mode: TE_00958
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17062
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:072:22:16:31.036 7522964 SIMFOCUS -418
2015:072:22:17:58.896 7523307 SIMFOCUS -468
2015:073:01:53:12.602 7573702 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:073:01:53:12.602 7573702 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:073:01:55:11.778 7574167 SIMFOCUS -536
2015:073:01:56:12.602 7574404 MP_OBSID 17471
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17471:
Target Name: Centaurus A SI Mode: TE_0066C
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:073:01:56:45.351 7574532 ACISPKT AA00000000
2015:073:01:56:49.351 7574548 ACISPKT AA00000000
2015:073:01:56:53.351 7574563 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:073:01:57:17.351 7574657 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2015:073:01:58:20.351 7574903 ACISPKT WT0066C034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0066c034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:073:01:58:24.351 7574919 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17471
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0066CB is WT0066C034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17471,OORMPEN,CSELFMT2,ENAB)
2015:073:01:58:28.351 7574934 ACISPKT RS_0000001
2015:073:01:58:32.351 7574950 ACISPKT RH_0000001
2015:073:03:44:22.351 7599730 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:073:03:44:22.351 7599730 SIMTRANS -99616 (HRC-S)
2015:073:03:47:22.351 7600433 COMMAND_HW CSELFMT4
2015:073:03:47:22.351 7600433 MP_OBSID 16757
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16757:
No ACIS info found for obsid 16757.
This is an HRC-S observation.
==> NIL SI_Mode is HSO_0002
2015:073:03:47:56.690 7600567 COMMAND_SW 4OLETGIN
2015:073:03:50:22.561 7601136 SIMFOCUS -991
2015:073:03:51:40.151 7601439 COMMAND_HW CSELFMT1
2015:073:04:04:02.901 7604337 ACISPKT WSVIDALLDN
2015:073:04:04:20.901 7604408 ACISPKT WSPOW0CE3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I1 I2 I3 S2 S3
2015:073:04:05:23.901 7604653 ACISPKT RS_0000001
2015:073:04:05:27.901 7604669 ACISPKT RH_0000001
2015:073:04:05:50.901 7604759 ACISPKT WT0023A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0023a024
fepCcdSelect = 10 7 1 2 3 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 4
2015:073:04:05:54.901 7604774 ACISPKT W200038014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00038014
ccdId = 1
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2015:073:04:05:58.901 7604790 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16757
---------------------------------------------------------------------------
==> Parameter Block for SI mode HSO_0002B is WT0023A024 and is stored.
==> Window for SI mode HSO_0002 is W200038014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-IN,16757,OORMPEN,CSELFMT1,ENAB)
2015:073:04:06:54.901 7605008 AOENDITH AOENDITH
==> DITHER ENABLED
2015:073:23:01:19.901 7870628 ACISPKT AA00000000
==> ACIS integration time of 67.48 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:073:23:04:19.901 7871330 COMMAND_HW CSELFMT4
2015:073:23:04:19.901 7871330 MP_OBSID 17173
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17173:
Target Name: Abell 1664 SI Mode: TE_0046E
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: -1 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:073:23:04:19.901 7871330 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:073:23:04:54.240 7871464 COMMAND_SW 4OLETGRE
2015:073:23:08:37.701 7872336 COMMAND_HW CSELFMT2
2015:073:23:09:56.335 7872643 SIMFOCUS -418
2015:073:23:11:24.195 7872986 SIMFOCUS -468
2015:073:23:13:34.393 7873494 ACISPKT AA00000000
2015:073:23:13:38.393 7873510 ACISPKT AA00000000
2015:073:23:13:42.393 7873526 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:073:23:14:06.393 7873619 ACISPKT WSPOW0EC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S1 S2 S3
2015:073:23:14:23.438 7873619 ORBPOINT EAPOGEE
2015:073:23:15:09.393 7873865 ACISPKT WT0046E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046e034
fepCcdSelect = 10 7 5 6 3 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:073:23:15:13.393 7873881 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17173
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046EB is WT0046E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17173,OORMPEN,CSELFMT2,ENAB)
2015:073:23:15:17.393 7873896 ACISPKT RS_0000001
2015:073:23:15:21.393 7873912 ACISPKT RH_0000001
2015:073:23:31:21.393 7877658 AOENDITH AOENDITH
==> DITHER ENABLED
2015:074:04:58:46.393 7954322 ACISPKT AA00000000
==> ACIS integration time of 19.25 ks.
This is 96.27% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:074:04:58:46.393 7954322 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:074:05:00:45.569 7954787 SIMFOCUS -536
2015:074:05:01:46.393 7955024 MP_OBSID 17149
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17149:
Target Name: Abell1882 - Filament #1 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 70 Remaining Exposure time: 70
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:074:05:02:51.806 7955279 ACISPKT AA00000000
2015:074:05:02:55.806 7955295 ACISPKT AA00000000
2015:074:05:02:59.806 7955311 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:074:05:03:23.806 7955404 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:074:05:04:26.806 7955650 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:074:05:04:30.806 7955666 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17149
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17149,OORMPEN,CSELFMT2,ENAB)
2015:074:05:04:34.806 7955681 ACISPKT RS_0000001
2015:074:05:04:38.806 7955697 ACISPKT RH_0000001
2015:075:00:16:03.261 8225295 ACISPKT AA00000000
==> ACIS integration time of 67.85 ks.
This is 96.93% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:075:00:16:03.261 8225295 SIMTRANS -99616 (HRC-S)
2015:075:00:19:03.261 8225997 MP_OBSID 52017
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52017:
No ocat info found for obsid 52017
2015:075:00:22:03.471 8226700 SIMFOCUS -991
2015:075:00:23:28.971 8227034 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2015:075:00:23:28.971 8227034 ACISPKT AA00000000
2015:075:00:23:32.971 8227050 ACISPKT AA00000000
2015:075:00:23:36.971 8227065 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:075:00:24:00.971 8227159 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:075:00:25:03.971 8227405 ACISPKT WBTX_QUIET
2015:075:00:25:07.971 8227420 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:075:00:25:11.971 8227436 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52017
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52017,OORMPDS,CSELFMT2,ENAB)
2015:075:00:25:15.971 8227452 ACISPKT RS_0000001
2015:075:00:25:19.971 8227467 ACISPKT RH_0000001
2015:075:00:25:42.971 8227557 ACISPKT RBTXINGALL
2015:075:00:27:58.971 8228088 MP_OBSID 52016
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52016:
No ocat info found for obsid 52016
2015:075:03:07:08.971 8265356 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:075:03:10:08.971 8266058 ACISPKT AA00000000
2015:075:03:10:08.971 8266058 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 075:03:10:08
from CRM file: EE1RADZ0 = 075:03:10:08
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:075:03:10:17.971 8266094 ACISPKT WSVIDALLDN
2015:075:03:11:20.971 8266339 ACISPKT RS_0000001
2015:075:06:05:34.431 8307133 MP_OBSID 52015
LATEST OCAT INFO FOR OBSID 52015:
No ocat info found for obsid 52015
2015:075:06:59:22.377 8314188 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2015:075:09:09:57.945 8350308 MP_OBSID 52014
LATEST OCAT INFO FOR OBSID 52014:
No ocat info found for obsid 52014
2015:075:11:06:08.971 8377512 MP_OBSID 52013
LATEST OCAT INFO FOR OBSID 52013:
No ocat info found for obsid 52013
2015:075:11:06:08.971 8377512 ACISPKT AA00000000
2015:075:11:06:08.971 8377512 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2015:075:11:06:12.971 8377528 ACISPKT AA00000000
2015:075:11:06:16.971 8377543 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:075:11:06:40.971 8377637 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:075:11:07:43.971 8377883 ACISPKT WBTX_QUIET
2015:075:11:07:47.971 8377898 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:075:11:07:51.971 8377914 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52013
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52013,OORMPDS,CSELFMT2,ENAB)
2015:075:11:07:55.971 8377930 ACISPKT RS_0000001
2015:075:11:07:59.971 8377945 ACISPKT RH_0000001
2015:075:11:08:22.971 8378035 ACISPKT RBTXINGALL
2015:075:11:24:35.669 8381831 MP_OBSID 52012
==> ObsID change occurs 18.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52012:
No ocat info found for obsid 52012
2015:075:13:24:28.971 8409902 COMMAND_SW OORMPEN
==> Exit leg pad time is 8.30 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 075:11:06:08
from CRM file: XE1RADZ0 = 075:11:06:08
==> CRM Pad Time: 8.301 ks and Backstop Pad Time: 8.30 ks agree.
2015:075:13:24:29.971 8409906 ACISPKT AA00000000
==> ACIS integration time of 6.80 ks.
2015:075:13:24:29.971 8409906 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:075:13:24:30.971 8409910 ACISPKT AA00000000
2015:075:13:24:34.971 8409926 ACISPKT AA00000000
2015:075:13:24:38.971 8409941 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:075:13:25:02.971 8410035 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2015:075:13:26:05.971 8410281 ACISPKT WT0076A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0076a024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2015:075:13:26:09.971 8410297 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,52012,OORMPEN,CSELFMT2,ENAB)
2015:075:13:26:13.971 8410312 ACISPKT RS_0000001
2015:075:13:26:17.971 8410328 ACISPKT RH_0000001
2015:075:13:27:29.971 8410609 MP_OBSID 17022
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17022:
Target Name: SDSS J0936+0046 SI Mode: TE_0076A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3 Remaining Exposure time: 3
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17022
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0076AB is WT0076A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:075:13:30:06.405 8411219 SIMFOCUS -418
2015:075:13:31:34.265 8411562 SIMFOCUS -468
2015:075:14:34:46.971 8426363 ACISPKT AA00000000
==> ACIS integration time of 3.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:075:14:34:46.971 8426363 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:075:14:36:46.147 8426828 SIMFOCUS -536
2015:075:14:37:46.971 8427065 MP_OBSID 17633
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17633:
Target Name: Chandra Deep Field-South SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 36 Remaining Exposure time: 36
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2015:075:14:48:19.784 8429535 ACISPKT AA00000000
2015:075:14:48:23.784 8429550 ACISPKT AA00000000
2015:075:14:48:27.784 8429566 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:075:14:48:51.784 8429660 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:075:14:49:54.784 8429906 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:075:14:49:58.784 8429921 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17633
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17633,OORMPEN,CSELFMT2,ENAB)
2015:075:14:50:02.784 8429937 ACISPKT RS_0000001
2015:075:14:50:06.784 8429952 ACISPKT RH_0000001
2015:076:01:09:03.784 8574877 ACISPKT AA00000000
==> ACIS integration time of 35.91 ks.
This is 99.74% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:076:01:12:03.784 8575580 MP_OBSID 17205
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17205:
Target Name: ZwCl 0008.8+5215 EAST SI Mode: TE_0046C
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 6.5 Remaining Exposure time: 6.5
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:076:01:25:44.069 8578781 ACISPKT AA00000000
2015:076:01:25:48.069 8578796 ACISPKT AA00000000
2015:076:01:25:52.069 8578812 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:076:01:26:16.069 8578906 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:076:01:27:19.069 8579152 ACISPKT WT0046C034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046c034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:076:01:27:23.069 8579167 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17205
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046CB is WT0046C034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17205,OORMPEN,CSELFMT2,ENAB)
2015:076:01:27:27.069 8579183 ACISPKT RS_0000001
2015:076:01:27:31.069 8579198 ACISPKT RH_0000001
2015:076:03:39:04.069 8610000 ACISPKT AA00000000
==> ACIS integration time of 6.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:076:03:42:04.069 8610703 MP_OBSID 16344
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16344:
Target Name: BRC2 SI Mode: TE_0050E
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2015:076:03:42:04.069 8610703 ACISPKT AA00000000
2015:076:03:42:08.069 8610718 ACISPKT AA00000000
2015:076:03:42:12.069 8610734 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:076:03:42:36.069 8610828 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:076:03:43:39.069 8611073 ACISPKT WT0050E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0050e034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2015:076:03:43:43.069 8611089 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16344
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0050EB is WT0050E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16344,OORMPEN,CSELFMT2,ENAB)
2015:076:03:43:47.069 8611105 ACISPKT RS_0000001
2015:076:03:43:51.069 8611120 ACISPKT RH_0000001
2015:076:11:01:01.069 8713481 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:076:11:01:01.069 8713481 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:076:11:03:00.245 8713946 SIMFOCUS -418
2015:076:11:04:01.069 8714184 COMMAND_HW CSELFMT4
2015:076:11:04:01.069 8714184 MP_OBSID 16710
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16710:
Target Name: GRS 1915+105 SI Mode: CC_00152
Instrument: ACIS-S Grating: HETG Type: TOO
Exposure Time: 40 Remaining Exposure time: 40
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: CC Event TM Format: G Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: Y Start Row: 1 Start Column: 155
Height: 1024 Width: 100
Lower Energy: 0.08 Energy Range: 13 Sample Rate: 10
Dither:
Cycle: 16 Obj_Flag: NO
LATEST OCAT WINDOW INFO FOR OBSID 16710:
Window on CCD: 7 Start Row: 1 Start Column: 155
Height: 1024 Width: 100 Include: E
Lower Energy: 0.08 Energy Range: 13 Sample Rate: 10
2015:076:11:04:19.005 8714254 SIMFOCUS -468
2015:076:11:04:35.408 8714318 COMMAND_SW 4OHETGIN
2015:076:11:08:18.869 8715190 COMMAND_HW CSELFMT2
2015:076:11:25:14.332 8719153 ACISPKT AA00000000
2015:076:11:25:18.332 8719168 ACISPKT AA00000000
2015:076:11:25:22.332 8719184 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:076:11:25:46.332 8719277 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:076:11:26:49.332 8719523 ACISPKT WC00152014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00152014
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_CC_MODE_EV3x3
bepPackingMode = 1 # BEP_CC_MODE_GRADED
recomputeBias = 1
trickleBias = 1
rowSum = 0
columnSum = 0
fep0SplitThreshold = 16 16 16 16
fep1SplitThreshold = 13 13 13 13
fep2SplitThreshold = 13 13 13 13
fep3SplitThreshold = 16 16 16 16
fep4SplitThreshold = 16 16 16 16
fep5SplitThreshold = 16 16 16 16
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 4
2015:076:11:26:53.332 8719539 ACISPKT W10011C014
ACIS 1D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x0011c014
ccdId = 7
ccdColumn = 154
width = 99
sampleCycle = 10
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
2015:076:11:26:57.332 8719554 ACISPKT XCZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16710
---------------------------------------------------------------------------
==> Parameter Block for SI mode CC_00152B is WC00152014 and is stored.
==> Window for SI mode CC_00152 is W10011C014 and is stored.
>>>ERROR: Window Block and OCAT do not match
Please check the following errors
- Energy Filters Do Not Match for CCD 7.
Please compare these parameters
The actual energy filter in PHA is : lower:20 range: 3250
The requested is : lower:20 range:3000
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,16710,OORMPEN,CSELFMT2,ENAB)
2015:076:11:27:01.332 8719570 ACISPKT RS_0000001
2015:076:11:27:05.332 8719586 ACISPKT RH_0000001
2015:076:14:42:44.017 8721947 ORBPOINT EAPOGEE
2015:076:22:40:50.332 8877342 ACISPKT AA00000000
==> ACIS integration time of 40.00 ks.
This is 99.99% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:076:22:43:50.332 8878044 COMMAND_HW CSELFMT4
2015:076:22:43:50.332 8878044 MP_OBSID 17057
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17057:
Target Name: M87 SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:076:22:44:24.671 8878178 COMMAND_SW 4OHETGRE
2015:076:22:48:08.132 8879050 COMMAND_HW CSELFMT2
2015:076:23:06:36.465 8883375 ACISPKT AA00000000
2015:076:23:06:40.465 8883391 ACISPKT AA00000000
2015:076:23:06:44.465 8883407 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:076:23:07:08.465 8883500 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2015:076:23:08:11.465 8883746 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:076:23:08:15.465 8883762 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17057
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17057,OORMPEN,CSELFMT2,ENAB)
2015:076:23:08:19.465 8883777 ACISPKT RS_0000001
2015:076:23:08:23.465 8883793 ACISPKT RH_0000001
2015:077:00:41:47.465 8905662 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:077:00:41:47.465 8905662 SIMTRANS 89720 (ACIS-I)
==> THERE IS A Z-SIM OF -8.01 mm FOR THIS OBSERVATION.
2015:077:00:43:42.264 8906110 SIMFOCUS -536
2015:077:00:44:47.465 8906365 MP_OBSID 16354
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16354:
Target Name: NGC5033 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -2.5 Z: -0.25 Z-sim: -8
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2015:077:00:44:47.465 8906365 ACISPKT AA00000000
2015:077:00:44:51.465 8906380 ACISPKT AA00000000
2015:077:00:44:55.465 8906396 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:077:00:45:19.465 8906490 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:077:00:46:22.465 8906735 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:077:00:46:26.465 8906751 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16354
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16354,OORMPEN,CSELFMT2,ENAB)
2015:077:00:46:30.465 8906767 ACISPKT RS_0000001
2015:077:00:46:34.465 8906782 ACISPKT RH_0000001
2015:077:15:00:24.725 9106705 ACISPKT AA00000000
==> ACIS integration time of 50.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:077:15:00:24.725 9106705 SIMTRANS -99616 (HRC-S)
2015:077:15:03:24.725 9107408 MP_OBSID 52011
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52011:
No ocat info found for obsid 52011
2015:077:15:06:20.558 9108094 SIMFOCUS -991
2015:077:15:07:46.058 9108428 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2015:077:15:07:46.058 9108428 ACISPKT AA00000000
2015:077:15:07:50.058 9108443 ACISPKT AA00000000
2015:077:15:07:54.058 9108459 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:077:15:08:18.058 9108552 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:077:15:09:21.058 9108798 ACISPKT WBTX_QUIET
2015:077:15:09:25.058 9108814 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:077:15:09:29.058 9108829 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52011
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52011,OORMPDS,CSELFMT2,ENAB)
2015:077:15:09:33.058 9108845 ACISPKT RS_0000001
2015:077:15:09:37.058 9108861 ACISPKT RH_0000001
2015:077:15:10:00.058 9108950 ACISPKT RBTXINGALL
2015:077:15:13:51.280 9109853 MP_OBSID 52010
==> ObsID change occurs 6.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52010:
No ocat info found for obsid 52010
2015:077:15:58:59.172 9120420 MP_OBSID 52009
LATEST OCAT INFO FOR OBSID 52009:
No ocat info found for obsid 52009
2015:077:17:51:26.058 9146749 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:077:17:54:26.058 9147452 ACISPKT AA00000000
2015:077:17:54:26.058 9147452 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 077:17:54:26
from CRM file: EE1RADZ0 = 077:17:54:26
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:077:17:54:35.058 9147487 ACISPKT WSVIDALLDN
2015:077:17:55:38.058 9147733 ACISPKT RS_0000001
2015:077:22:26:59.296 9147733 ORBPOINT EPERIGEE
2015:078:03:14:26.058 9278574 MP_OBSID 52008
LATEST OCAT INFO FOR OBSID 52008:
No ocat info found for obsid 52008
2015:078:03:14:26.058 9278574 ACISPKT AA00000000
2015:078:03:14:26.058 9278574 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2015:078:03:14:30.058 9278589 ACISPKT AA00000000
2015:078:03:14:34.058 9278605 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:078:03:14:58.058 9278699 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:078:03:16:01.058 9278945 ACISPKT WBTX_QUIET
2015:078:03:16:05.058 9278960 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:078:03:16:09.058 9278976 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52008
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52008,OORMPDS,CSELFMT2,ENAB)
2015:078:03:16:13.058 9278991 ACISPKT RS_0000001
2015:078:03:16:17.058 9279007 ACISPKT RH_0000001
2015:078:03:16:40.058 9279097 ACISPKT RBTXINGALL
2015:078:04:42:46.058 9299257 COMMAND_SW OORMPEN
==> Exit leg pad time is 5.30 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 078:03:14:26
from CRM file: XE1RADZ0 = 078:03:14:26
==> CRM Pad Time: 5.301 ks and Backstop Pad Time: 5.30 ks agree.
2015:078:04:42:47.058 9299261 ACISPKT AA00000000
==> ACIS integration time of 3.80 ks.
2015:078:04:42:47.058 9299261 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:078:04:45:47.058 9299963 MP_OBSID 17634
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17634:
Target Name: Chandra Deep Field-South SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 49 Remaining Exposure time: 49
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2015:078:04:45:47.058 9299963 ACISPKT AA00000000
2015:078:04:45:51.058 9299979 ACISPKT AA00000000
2015:078:04:45:55.058 9299994 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:078:04:46:19.058 9300088 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:078:04:47:22.058 9300334 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:078:04:47:26.058 9300349 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17634
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17634,OORMPEN,CSELFMT2,ENAB)
2015:078:04:47:30.058 9300365 ACISPKT RS_0000001
2015:078:04:47:34.058 9300381 ACISPKT RH_0000001
2015:078:04:48:47.268 9300666 SIMFOCUS -486
2015:078:04:50:13.768 9301004 SIMFOCUS -536
2015:078:18:33:07.058 9493680 ACISPKT AA00000000
==> ACIS integration time of 48.30 ks.
This is 98.58% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:078:18:33:07.058 9493680 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:078:18:35:06.234 9494145 SIMFOCUS -418
2015:078:18:36:07.058 9494383 MP_OBSID 16669
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16669:
Target Name: HAT-P-11 SI Mode: TE_004A6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 8 Remaining Exposure time: 8
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:078:18:36:24.994 9494453 SIMFOCUS -468
2015:078:19:00:02.201 9499983 ACISPKT AA00000000
2015:078:19:00:06.201 9499999 ACISPKT AA00000000
2015:078:19:00:10.201 9500014 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:078:19:00:34.201 9500108 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2015:078:19:01:37.201 9500354 ACISPKT WT004A6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a6024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:078:19:01:41.201 9500370 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16669
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A6B is WT004A6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16669,OORMPEN,CSELFMT2,ENAB)
2015:078:19:01:45.201 9500385 ACISPKT RS_0000001
2015:078:19:01:49.201 9500401 ACISPKT RH_0000001
2015:078:21:37:39.201 9536889 ACISPKT AA00000000
==> ACIS integration time of 8.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:078:21:37:39.201 9536889 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:078:21:39:38.377 9537354 SIMFOCUS -536
2015:078:21:40:39.201 9537591 MP_OBSID 17223
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17223:
Target Name: Abell 1795 outskirts SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 60 Remaining Exposure time: 60
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:078:21:44:43.598 9538545 ACISPKT AA00000000
2015:078:21:44:47.598 9538560 ACISPKT AA00000000
2015:078:21:44:51.598 9538576 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:078:21:45:15.598 9538670 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2015:078:21:46:18.598 9538915 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:078:21:46:22.598 9538931 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17223
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17223,OORMPEN,CSELFMT2,ENAB)
2015:078:21:46:26.598 9538947 ACISPKT RS_0000001
2015:078:21:46:30.598 9538962 ACISPKT RH_0000001
2015:079:06:10:22.833 9544933 ORBPOINT EAPOGEE
2015:079:14:49:00.598 9778377 ACISPKT AA00000000
==> ACIS integration time of 60.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:079:14:52:00.598 9779079 MP_OBSID 17609
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17609:
Target Name: Abell 1795 outskirts SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 60 Remaining Exposure time: 60
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:079:14:57:30.598 9780367 ACISPKT WSVIDALLDN
2015:079:14:57:48.598 9780437 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2015:079:14:58:51.598 9780683 ACISPKT WT00459034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00459034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:079:14:58:55.598 9780699 ACISPKT RS_0000001
2015:079:14:58:59.598 9780714 ACISPKT RH_0000001
2015:079:14:59:22.598 9780804 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17609
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458 is WT00459034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17609,OORMPEN,CSELFMT2,ENAB)
2015:080:07:37:30.992 10014515 ACISPKT AA00000000
==> ACIS integration time of 59.89 ks.
This is 99.81% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:080:07:37:30.992 10014515 SIMTRANS -99616 (HRC-S)
2015:080:07:40:30.992 10015217 MP_OBSID 52007
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52007:
No ocat info found for obsid 52007
2015:080:07:43:31.202 10015921 SIMFOCUS -991
2015:080:07:44:56.702 10016254 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2015:080:07:44:56.702 10016254 ACISPKT AA00000000
2015:080:07:45:00.702 10016270 ACISPKT AA00000000
2015:080:07:45:04.702 10016286 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:080:07:45:28.702 10016379 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:080:07:46:31.702 10016625 ACISPKT WBTX_QUIET
2015:080:07:46:35.702 10016641 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:080:07:46:39.702 10016656 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52007
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52007,OORMPDS,CSELFMT2,ENAB)
2015:080:07:46:43.702 10016672 ACISPKT RS_0000001
2015:080:07:46:47.702 10016688 ACISPKT RH_0000001
2015:080:07:47:10.702 10016777 ACISPKT RBTXINGALL
2015:080:07:50:53.043 10017645 MP_OBSID 52006
==> ObsID change occurs 5.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 52006:
No ocat info found for obsid 52006
2015:080:09:17:34.702 10037944 ACISPKT AA00000000
==> ACIS integration time of 4.05 ks.
2015:080:09:20:34.702 10038647 ACISPKT AA00000000
2015:080:09:20:34.702 10038647 ORBPOINT EEF1000
==> Entry leg pad time is 5.74 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 080:09:20:34
from CRM file: EE1RADZ0 = 080:09:20:34
==> CRM Pad Time: 5.738 ks and Backstop Pad Time: 5.74 ks agree.
2015:080:09:20:43.702 10038682 ACISPKT WSVIDALLDN
2015:080:09:21:46.702 10038928 ACISPKT RS_0000001
2015:080:12:36:19.854 10084481 MP_OBSID 52005
LATEST OCAT INFO FOR OBSID 52005:
No ocat info found for obsid 52005
2015:080:13:53:00.000 10102433 COMMAND_HW 1HHTRBEN
2015:080:13:53:01.000 10102437 COMMAND_HW 1HHTRBON
2015:080:13:53:37.474 10102437 ORBPOINT EPERIGEE
2015:080:17:54:34.702 10158998 MP_OBSID 52004
LATEST OCAT INFO FOR OBSID 52004:
No ocat info found for obsid 52004
2015:080:17:54:34.702 10158998 ACISPKT AA00000000
2015:080:17:54:34.702 10158998 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2015:080:17:54:38.702 10159013 ACISPKT AA00000000
2015:080:17:54:42.702 10159029 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:080:17:55:06.702 10159123 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:080:17:56:09.702 10159369 ACISPKT WBTX_QUIET
2015:080:17:56:13.702 10159384 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:080:17:56:17.702 10159400 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 52004
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,52004,OORMPDS,CSELFMT2,ENAB)
2015:080:17:56:21.702 10159415 ACISPKT RS_0000001
2015:080:17:56:25.702 10159431 ACISPKT RH_0000001
2015:080:17:56:48.702 10159521 ACISPKT RBTXINGALL
2015:080:20:41:13.702 10198018 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 080:17:54:34
from CRM file: XE1RADZ0 = 080:17:54:34
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:080:20:41:14.702 10198022 ACISPKT AA00000000
==> ACIS integration time of 8.50 ks.
2015:080:20:41:14.702 10198022 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:080:20:41:15.702 10198026 ACISPKT AA00000000
2015:080:20:41:19.702 10198042 ACISPKT AA00000000
2015:080:20:41:23.702 10198057 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:080:20:41:47.702 10198151 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:080:20:42:50.702 10198397 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:080:20:42:54.702 10198412 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,52004,OORMPEN,CSELFMT2,ENAB)
2015:080:20:42:58.702 10198428 ACISPKT RS_0000001
2015:080:20:43:02.702 10198444 ACISPKT RH_0000001
2015:080:20:44:14.702 10198725 MP_OBSID 16453
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16453:
Target Name: Chandra Deep Field-South SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 70 Remaining Exposure time: 70
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 16453
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:080:20:47:14.912 10199428 SIMFOCUS -486
2015:080:20:48:41.412 10199765 SIMFOCUS -536
2015:081:16:48:52.702 10480785 ACISPKT AA00000000
==> ACIS integration time of 71.12 ks.
This is 101.60% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:081:16:51:52.702 10481488 MP_OBSID 16826
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16826:
Target Name: 2FGL J1839.0-0102 SI Mode: TE_0064C
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:081:17:12:41.300 10486360 ACISPKT AA00000000
2015:081:17:12:45.300 10486376 ACISPKT AA00000000
2015:081:17:12:49.300 10486391 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:081:17:13:13.300 10486485 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2015:081:17:14:16.300 10486731 ACISPKT WT0064C034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0064c034
fepCcdSelect = 10 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:081:17:14:20.300 10486746 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16826
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0064CB is WT0064C034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16826,OORMPEN,CSELFMT2,ENAB)
2015:081:17:14:24.300 10486762 ACISPKT RS_0000001
2015:081:17:14:28.300 10486778 ACISPKT RH_0000001
2015:081:20:23:38.300 10531070 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:081:20:23:38.300 10531070 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:081:20:25:37.476 10531535 SIMFOCUS -418
2015:081:20:26:38.300 10531773 MP_OBSID 17066
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17066:
Target Name: PSS 1323-0021 SI Mode: TE_004A6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 11 Remaining Exposure time: 11
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:081:20:26:56.236 10531843 SIMFOCUS -468
2015:081:20:32:23.549 10533120 ACISPKT AA00000000
2015:081:20:32:27.549 10533136 ACISPKT AA00000000
2015:081:20:32:31.549 10533151 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:081:20:32:55.549 10533245 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2015:081:20:33:58.549 10533491 ACISPKT WT004A6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a6024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:081:20:34:02.549 10533506 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17066
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A6B is WT004A6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17066,OORMPEN,CSELFMT2,ENAB)
2015:081:20:34:06.549 10533522 ACISPKT RS_0000001
2015:081:20:34:10.549 10533538 ACISPKT RH_0000001
2015:081:21:37:23.988 10539508 ORBPOINT EAPOGEE
2015:082:00:00:00.549 10581733 ACISPKT AA00000000
==> ACIS integration time of 11.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 8 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
51 8 41 36 36 107
**NOTE: There are 6 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
2 2 1 1
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. An ACIS Hardware command is in the vehicle load. Check for SAR.
o. The OCAT and the window block did NOT match for obsid(s)
- 16710
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED