-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2015/MAY2215/oflsa/CR142_1406.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2015/MAY2215/oflsa/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-OUT,LETG-OUT,51859,OORMPDS,CSELFMT2,ENAB)
2015:142:14:57:20.514 14244867 ACISPKT AA00000000
2015:142:14:57:20.514 14244867 SIMTRANS 74032 (ACIS-S)
==> THERE IS A Z-SIM OF -4.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-S WHILE RADMON IS DISABLED!
2015:142:15:00:20.514 14245569 COMMAND_HW CSELFMT4
2015:142:15:00:20.514 14245569 MP_OBSID 16694
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16694:
Target Name: MXB 1730-335 SI Mode: CC_0012C
Instrument: ACIS-S Grating: HETG Type: TOO
Exposure Time: 80 Remaining Exposure time: 80
Offset: Y: 0.66 Z: -0.3 Z-sim: -4
ACIS Exposure Mode: CC Event TM Format: G Frame Time:
Chips Turned On: NNNN NYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:142:15:00:54.853 14245703 COMMAND_SW 4OHETGIN
2015:142:15:04:38.314 14246575 COMMAND_HW CSELFMT2
2015:142:15:23:53.780 14251084 ACISPKT AA00000000
2015:142:15:23:57.780 14251100 ACISPKT AA00000000
2015:142:15:24:01.780 14251116 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:142:15:24:25.780 14251209 ACISPKT WSPOW3E03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S1 S2 S3 S4 S5
2015:142:15:25:28.780 14251455 ACISPKT WC0012C024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0012c024
fepCcdSelect = 10 7 5 6 8 9
fepMode = 2 # FEP_CC_MODE_EV3x3
bepPackingMode = 1 # BEP_CC_MODE_GRADED
recomputeBias = 1
trickleBias = 1
rowSum = 0
columnSum = 0
fep0SplitThreshold = 0 0 0 0
fep1SplitThreshold = 13 13 13 13
fep2SplitThreshold = 13 13 13 13
fep3SplitThreshold = 16 16 16 16
fep4SplitThreshold = 16 16 16 16
fep5SplitThreshold = 16 16 16 16
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:142:15:25:32.780 14251471 ACISPKT XCZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16694
---------------------------------------------------------------------------
==> Parameter Block for SI mode CC_0012CB is WC0012C024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,16694,OORMPDS,CSELFMT2,ENAB)
2015:142:15:25:36.780 14251486 ACISPKT RS_0000001
2015:142:15:25:40.780 14251502 ACISPKT RH_0000001
2015:142:17:27:34.322 14280042 ORBPOINT EAPOGEE
2015:143:13:53:04.780 14566991 ACISPKT AA00000000
==> ACIS integration time of 80.42 ks.
This is 100.52% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:143:13:53:04.780 14566991 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-S WHILE RADMON IS DISABLED!
2015:143:13:56:04.780 14567693 COMMAND_HW CSELFMT4
2015:143:13:56:04.780 14567693 MP_OBSID 17470
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17470:
Target Name: LBQS 2201-1834 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GTO
Exposure Time: 8.6 Remaining Exposure time: 8.6
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:143:13:56:39.119 14567827 COMMAND_SW 4OHETGRE
2015:143:14:00:22.580 14568699 COMMAND_HW CSELFMT2
2015:143:14:01:37.991 14568993 ACISPKT AA00000000
2015:143:14:01:41.991 14569009 ACISPKT AA00000000
2015:143:14:01:45.991 14569025 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:143:14:02:09.991 14569118 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2015:143:14:03:12.991 14569364 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:143:14:03:16.991 14569380 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17470
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17470,OORMPDS,CSELFMT2,ENAB)
2015:143:14:03:20.991 14569395 ACISPKT RS_0000001
2015:143:14:03:24.991 14569411 ACISPKT RH_0000001
2015:143:16:45:50.991 14607444 ACISPKT AA00000000
==> ACIS integration time of 8.60 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:143:16:48:50.991 14608147 MP_OBSID 16990
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16990:
Target Name: NGC3949 SI Mode: TE_007BC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.4 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:143:17:09:00.799 14612868 ACISPKT AA00000000
2015:143:17:09:04.799 14612883 ACISPKT AA00000000
2015:143:17:09:08.799 14612899 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:143:17:09:32.799 14612993 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2015:143:17:10:35.799 14613239 ACISPKT WT007BC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007bc024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:143:17:10:39.799 14613254 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16990
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007BCB is WT007BC024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16990,OORMPDS,CSELFMT2,ENAB)
2015:143:17:10:43.799 14613270 ACISPKT RS_0000001
2015:143:17:10:47.799 14613285 ACISPKT RH_0000001
2015:143:18:29:58.249 14631824 ACISPKT AA00000000
==> ACIS integration time of 3.40 ks.
This is 100.01% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:143:18:29:58.249 14631824 SIMTRANS -99616 (HRC-S)
2015:143:18:32:58.249 14632526 MP_OBSID 51874
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51874:
No ocat info found for obsid 51874
2015:143:18:35:34.683 14633137 SIMFOCUS -991
2015:143:18:37:01.543 14633476 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2015:143:18:37:01.543 14633476 ACISPKT AA00000000
2015:143:18:37:05.543 14633491 ACISPKT AA00000000
2015:143:18:37:09.543 14633507 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:143:18:37:33.543 14633600 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:143:18:38:36.543 14633846 ACISPKT WBTX_QUIET
2015:143:18:38:40.543 14633862 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:143:18:38:44.543 14633878 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51874
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51874,OORMPDS,CSELFMT2,ENAB)
2015:143:18:38:48.543 14633893 ACISPKT RS_0000001
2015:143:18:38:52.543 14633909 ACISPKT RH_0000001
2015:143:18:39:15.543 14633999 ACISPKT RBTXINGALL
2015:143:18:41:31.543 14634529 MP_OBSID 51873
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51873:
No ocat info found for obsid 51873
2015:143:19:58:34.478 14652570 MP_OBSID 51872
LATEST OCAT INFO FOR OBSID 51872:
No ocat info found for obsid 51872
2015:143:21:20:41.543 14671798 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:143:21:23:41.543 14672500 ACISPKT AA00000000
2015:143:21:23:41.543 14672500 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 143:21:23:41
from CRM file: EE1RADZ0 = 143:21:23:41
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:143:21:23:50.543 14672535 ACISPKT WSVIDALLDN
2015:143:21:24:53.543 14672781 ACISPKT RS_0000001
2015:143:21:29:44.484 14673916 MP_OBSID 51871
==> ObsID change occurs 6.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51871:
No ocat info found for obsid 51871
2015:144:01:11:58.204 14688869 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2015:144:04:55:54.432 14778384 MP_OBSID 51870
LATEST OCAT INFO FOR OBSID 51870:
No ocat info found for obsid 51870
2015:144:05:31:41.543 14786763 ACISPKT AA00000000
2015:144:05:31:41.543 14786763 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2015:144:05:31:45.543 14786779 ACISPKT AA00000000
2015:144:05:31:49.543 14786795 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:144:05:32:13.543 14786888 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:144:05:33:16.543 14787134 ACISPKT WBTX_QUIET
2015:144:05:33:20.543 14787150 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:144:05:33:24.543 14787165 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51870
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51870,OORMPDS,CSELFMT2,ENAB)
2015:144:05:33:28.543 14787181 ACISPKT RS_0000001
2015:144:05:33:32.543 14787197 ACISPKT RH_0000001
2015:144:05:33:55.543 14787286 ACISPKT RBTXINGALL
2015:144:07:40:34.543 14816941 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.73 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 144:05:31:41
from CRM file: XE1RADZ0 = 144:05:31:41
==> CRM Pad Time: 7.734 ks and Backstop Pad Time: 7.73 ks agree.
2015:144:07:40:35.543 14816945 ACISPKT AA00000000
==> ACIS integration time of 6.23 ks.
2015:144:07:40:35.543 14816945 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:144:07:40:36.543 14816949 ACISPKT AA00000000
2015:144:07:40:40.543 14816964 ACISPKT AA00000000
2015:144:07:40:44.543 14816980 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:144:07:41:08.543 14817074 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:144:07:42:11.543 14817319 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:144:07:42:15.543 14817335 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,51870,OORMPEN,CSELFMT2,ENAB)
2015:144:07:42:19.543 14817351 ACISPKT RS_0000001
2015:144:07:42:23.543 14817366 ACISPKT RH_0000001
2015:144:07:43:35.543 14817647 MP_OBSID 17150
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17150:
Target Name: Abell1882 - Filament #2 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 70 Remaining Exposure time: 0
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17150
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:144:07:46:35.753 14818351 SIMFOCUS -486
2015:144:07:48:02.253 14818688 SIMFOCUS -536
2015:144:17:46:13.543 14958752 ACISPKT AA00000000
==> ACIS integration time of 35.00 ks.
This is 50.00% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:144:17:46:13.543 14958752 SIMTRANS -50504 (HRC-I)
2015:144:17:49:13.543 14959454 COMMAND_HW CSELFMT1
2015:144:17:49:13.543 14959454 MP_OBSID 17396
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17396:
No ACIS info found for obsid 17396.
This is an HRC-I observation.
==> NIL SI_Mode is HIE_0002
2015:144:17:51:06.206 14959894 SIMFOCUS -716
2015:144:18:00:27.478 14962084 ACISPKT WSVIDALLDN
2015:144:18:00:45.478 14962154 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2015:144:18:01:48.478 14962400 ACISPKT RS_0000001
2015:144:18:01:52.478 14962416 ACISPKT RH_0000001
2015:144:18:02:15.478 14962506 ACISPKT WT00452024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00452024
fepCcdSelect = 10 0 1 2 3 7
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
2015:144:18:02:19.478 14962521 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17396
---------------------------------------------------------------------------
==> Parameter Block for SI mode HIE_0002B is WT00452024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,17396,OORMPEN,CSELFMT1,ENAB)
2015:144:18:03:39.478 14962833 AOENDITH AOENDITH
==> DITHER ENABLED
2015:144:20:53:49.478 15002677 ACISPKT AA00000000
==> ACIS integration time of 9.63 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:144:20:56:49.478 15003380 COMMAND_HW CSELFMT2
2015:144:20:56:49.478 15003380 MP_OBSID 17000
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17000:
Target Name: IC5052 SI Mode: TE_007BC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 1 Remaining Exposure time: 1
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:144:20:56:49.478 15003380 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:144:21:01:18.365 15004429 SIMFOCUS -418
2015:144:21:02:40.725 15004750 SIMFOCUS -468
2015:144:21:23:24.001 15009602 ACISPKT AA00000000
2015:144:21:23:28.001 15009618 ACISPKT AA00000000
2015:144:21:23:32.001 15009633 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:144:21:23:56.001 15009727 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2015:144:21:24:59.001 15009973 ACISPKT WT007BC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007bc024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:144:21:25:03.001 15009989 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17000
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007BCB is WT007BC024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17000,OORMPEN,CSELFMT2,ENAB)
2015:144:21:25:07.001 15010004 ACISPKT RS_0000001
2015:144:21:25:11.001 15010020 ACISPKT RH_0000001
2015:144:21:41:11.001 15013766 AOENDITH AOENDITH
==> DITHER ENABLED
2015:144:22:04:21.001 15019191 ACISPKT AA00000000
==> ACIS integration time of 1.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:144:22:04:21.001 15019191 SIMTRANS -99616 (HRC-S)
2015:144:22:07:21.001 15019893 COMMAND_HW CSELFMT1
2015:144:22:07:21.001 15019893 MP_OBSID 17661
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17661:
No ACIS info found for obsid 17661.
This is an HRC-S observation.
==> NIL SI_Mode is HSO_0002
2015:144:22:09:57.435 15020503 SIMFOCUS -1061
2015:144:22:10:20.379 15020593 ACISPKT WSVIDALLDN
2015:144:22:10:38.379 15020663 ACISPKT WSPOW0CE3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I1 I2 I3 S2 S3
2015:144:22:11:41.379 15020909 ACISPKT RS_0000001
2015:144:22:11:45.379 15020925 ACISPKT RH_0000001
2015:144:22:12:08.379 15021014 ACISPKT WT0023A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0023a024
fepCcdSelect = 10 7 1 2 3 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 4
2015:144:22:12:12.379 15021030 ACISPKT W200038014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00038014
ccdId = 1
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 801
ccdColumn = 0
width = 1023
height = 199
sampleCycle = 1
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2015:144:22:12:16.379 15021046 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17661
---------------------------------------------------------------------------
==> Parameter Block for SI mode HSO_0002B is WT0023A024 and is stored.
==> Window for SI mode HSO_0002 is W200038014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,17661,OORMPEN,CSELFMT1,ENAB)
2015:144:22:23:12.379 15023606 AOENDITH AOENDITH
==> DITHER ENABLED
2015:144:22:24:12.379 15023840 AODSDITH AODSDITH
==> DITHER DISABLED
2015:144:22:30:12.379 15025245 AOENDITH AOENDITH
==> DITHER ENABLED
2015:145:06:46:42.379 15141498 ACISPKT AA00000000
==> ACIS integration time of 30.09 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:145:06:49:42.379 15142201 COMMAND_HW CSELFMT2
2015:145:06:49:42.379 15142201 MP_OBSID 16191
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16191:
Target Name: Chandra Deep Field-South SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 100 Remaining Exposure time: 8.30264700000001
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
2015:145:06:49:42.379 15142201 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:145:06:55:42.589 15143606 SIMFOCUS -486
2015:145:06:57:10.489 15143950 SIMFOCUS -536
2015:145:07:06:25.282 15146115 ACISPKT AA00000000
2015:145:07:06:29.282 15146130 ACISPKT AA00000000
2015:145:07:06:33.282 15146146 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:145:07:06:57.282 15146239 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:145:07:08:00.282 15146485 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:145:07:08:04.282 15146501 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16191
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,16191,OORMPEN,CSELFMT2,ENAB)
2015:145:07:08:08.282 15146517 ACISPKT RS_0000001
2015:145:07:08:12.282 15146532 ACISPKT RH_0000001
2015:145:07:22:12.282 15149810 AOENDITH AOENDITH
==> DITHER ENABLED
2015:145:08:56:05.695 15171794 ORBPOINT EAPOGEE
2015:146:07:01:28.282 15482126 ACISPKT AA00000000
==> ACIS integration time of 84.77 ks.
This is 84.77% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:146:07:04:28.282 15482829 MP_OBSID 17443
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17443:
Target Name: M31 bulge SI Mode: TE_00986
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 5 Remaining Exposure time: 0
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: YYYY NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:146:07:19:16.605 15486295 ACISPKT AA00000000
2015:146:07:19:20.605 15486311 ACISPKT AA00000000
2015:146:07:19:24.605 15486327 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:146:07:19:48.605 15486420 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2015:146:07:20:51.605 15486666 ACISPKT WT00986024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00986024
fepCcdSelect = 10 7 3 2 1 0
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:146:07:20:55.605 15486682 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17443
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00986B is WT00986024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17443,OORMPEN,CSELFMT2,ENAB)
2015:146:07:20:59.605 15486697 ACISPKT RS_0000001
2015:146:07:21:03.605 15486713 ACISPKT RH_0000001
2015:146:09:06:54.482 15511497 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.02% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:146:09:06:54.482 15511497 SIMTRANS -99616 (HRC-S)
2015:146:09:09:54.482 15512199 MP_OBSID 51869
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51869:
No ocat info found for obsid 51869
2015:146:09:12:54.692 15512902 SIMFOCUS -991
2015:146:09:14:20.192 15513236 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2015:146:09:14:20.192 15513236 ACISPKT AA00000000
2015:146:09:14:24.192 15513252 ACISPKT AA00000000
2015:146:09:14:28.192 15513267 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:146:09:14:52.192 15513361 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:146:09:15:55.192 15513607 ACISPKT WBTX_QUIET
2015:146:09:15:59.192 15513622 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:146:09:16:03.192 15513638 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51869
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51869,OORMPDS,CSELFMT2,ENAB)
2015:146:09:16:07.192 15513654 ACISPKT RS_0000001
2015:146:09:16:11.192 15513669 ACISPKT RH_0000001
2015:146:09:16:34.192 15513759 ACISPKT RBTXINGALL
2015:146:09:18:50.192 15514290 MP_OBSID 51868
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51868:
No ocat info found for obsid 51868
2015:146:10:40:02.421 15533303 MP_OBSID 51867
LATEST OCAT INFO FOR OBSID 51867:
No ocat info found for obsid 51867
2015:146:11:58:00.192 15551558 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:146:12:01:00.192 15552261 ACISPKT AA00000000
2015:146:12:01:00.192 15552261 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 146:12:01:00
from CRM file: EE1RADZ0 = 146:12:01:00
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:146:12:01:09.192 15552296 ACISPKT WSVIDALLDN
2015:146:12:02:12.192 15552541 ACISPKT RS_0000001
2015:146:16:40:11.666 15552541 ORBPOINT EPERIGEE
2015:146:20:56:13.879 15677582 MP_OBSID 51866
LATEST OCAT INFO FOR OBSID 51866:
No ocat info found for obsid 51866
2015:146:21:35:00.192 15686661 ACISPKT AA00000000
2015:146:21:35:00.192 15686661 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2015:146:21:35:04.192 15686676 ACISPKT AA00000000
2015:146:21:35:08.192 15686692 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:146:21:35:32.192 15686785 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:146:21:36:35.192 15687031 ACISPKT WBTX_QUIET
2015:146:21:36:39.192 15687047 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:146:21:36:43.192 15687062 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51866
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51866,OORMPDS,CSELFMT2,ENAB)
2015:146:21:36:47.192 15687078 ACISPKT RS_0000001
2015:146:21:36:51.192 15687094 ACISPKT RH_0000001
2015:146:21:37:14.192 15687183 ACISPKT RBTXINGALL
2015:147:00:17:53.192 15724799 COMMAND_SW OORMPEN
==> Exit leg pad time is 9.77 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 146:21:35:00
from CRM file: XE1RADZ0 = 146:21:35:00
==> CRM Pad Time: 9.774 ks and Backstop Pad Time: 9.77 ks agree.
2015:147:00:17:54.192 15724803 ACISPKT AA00000000
==> ACIS integration time of 8.27 ks.
2015:147:00:17:54.192 15724803 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:147:00:17:55.192 15724807 ACISPKT AA00000000
2015:147:00:17:59.192 15724822 ACISPKT AA00000000
2015:147:00:18:03.192 15724838 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:147:00:18:27.192 15724932 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:147:00:19:30.192 15725178 ACISPKT WT004DE034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004de034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2015:147:00:19:34.192 15725193 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,51866,OORMPEN,CSELFMT2,ENAB)
2015:147:00:19:38.192 15725209 ACISPKT RS_0000001
2015:147:00:19:42.192 15725224 ACISPKT RH_0000001
2015:147:00:20:54.192 15725505 MP_OBSID 16445
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16445:
Target Name: 30 Doradus SI Mode: TE_004DE
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 0
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 16445
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004DEB is WT004DE034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:147:00:23:54.402 15726209 SIMFOCUS -486
2015:147:00:25:20.902 15726546 SIMFOCUS -536
2015:147:14:36:15.192 15925782 ACISPKT AA00000000
==> ACIS integration time of 50.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:147:14:39:15.192 15926485 MP_OBSID 17151
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17151:
Target Name: Abell1882 - Filament #3 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 70 Remaining Exposure time: 0
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:147:14:55:33.186 15930301 ACISPKT AA00000000
2015:147:14:55:37.186 15930317 ACISPKT AA00000000
2015:147:14:55:41.186 15930333 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:147:14:56:05.186 15930426 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:147:14:57:08.186 15930672 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:147:14:57:12.186 15930688 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17151
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17151,OORMPEN,CSELFMT2,ENAB)
2015:147:14:57:16.186 15930703 ACISPKT RS_0000001
2015:147:14:57:20.186 15930719 ACISPKT RH_0000001
2015:148:00:24:44.932 15934521 ORBPOINT EAPOGEE
2015:148:10:44:30.186 16208690 ACISPKT AA00000000
==> ACIS integration time of 70.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:148:10:47:30.186 16209392 MP_OBSID 17459
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17459:
Target Name: NGC5713 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 50 Remaining Exposure time: 0.386738000000001
Offset: Y: -1 Z: 0.7 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:148:11:00:53.267 16212526 ACISPKT WSVIDALLDN
2015:148:11:01:11.267 16212596 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2015:148:11:02:14.267 16212842 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:148:11:02:18.267 16212858 ACISPKT RS_0000001
2015:148:11:02:22.267 16212873 ACISPKT RH_0000001
2015:148:11:02:45.267 16212963 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17459
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17459,OORMPEN,CSELFMT2,ENAB)
2015:149:00:47:46.529 16406139 ACISPKT AA00000000
==> ACIS integration time of 49.50 ks.
This is 99.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:149:00:47:46.529 16406139 SIMTRANS -99616 (HRC-S)
2015:149:00:50:46.529 16406841 MP_OBSID 51865
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51865:
No ocat info found for obsid 51865
2015:149:00:53:46.739 16407545 SIMFOCUS -991
2015:149:00:55:12.239 16407878 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2015:149:00:55:12.239 16407878 ACISPKT AA00000000
2015:149:00:55:16.239 16407894 ACISPKT AA00000000
2015:149:00:55:20.239 16407909 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:149:00:55:44.239 16408003 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2015:149:00:56:47.239 16408249 ACISPKT WBTX_QUIET
2015:149:00:56:51.239 16408265 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:149:00:56:55.239 16408280 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51865
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51865,OORMPDS,CSELFMT2,ENAB)
2015:149:00:56:59.239 16408296 ACISPKT RS_0000001
2015:149:00:57:03.239 16408311 ACISPKT RH_0000001
2015:149:00:57:26.239 16408401 ACISPKT RBTXINGALL
2015:149:00:59:42.239 16408932 MP_OBSID 51864
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51864:
No ocat info found for obsid 51864
2015:149:02:19:24.479 16427594 MP_OBSID 51863
LATEST OCAT INFO FOR OBSID 51863:
No ocat info found for obsid 51863
2015:149:03:38:52.239 16446200 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:149:03:41:52.239 16446903 ACISPKT AA00000000
2015:149:03:41:52.239 16446903 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 149:03:41:52
from CRM file: EE1RADZ0 = 149:03:41:52
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:149:03:42:01.239 16446938 ACISPKT WSVIDALLDN
2015:149:03:43:04.239 16447184 ACISPKT RS_0000001
2015:149:03:46:06.573 16447895 MP_OBSID 51862
==> ObsID change occurs 4.2 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51862:
No ocat info found for obsid 51862
2015:149:08:09:06.267 16456026 ORBPOINT EPERIGEE
2015:149:11:46:54.259 16560471 MP_OBSID 51861
LATEST OCAT INFO FOR OBSID 51861:
No ocat info found for obsid 51861
2015:149:12:11:52.239 16566317 ACISPKT AA00000000
2015:149:12:11:52.239 16566317 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2015:149:12:11:56.239 16566333 ACISPKT AA00000000
2015:149:12:12:00.239 16566348 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:149:12:12:24.239 16566442 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:149:12:13:27.239 16566688 ACISPKT WBTX_QUIET
2015:149:12:13:31.239 16566704 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:149:12:13:35.239 16566719 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51861
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51861,OORMPDS,CSELFMT2,ENAB)
2015:149:12:13:39.239 16566735 ACISPKT RS_0000001
2015:149:12:13:43.239 16566750 ACISPKT RH_0000001
2015:149:12:14:06.239 16566840 ACISPKT RBTXINGALL
2015:149:14:54:45.239 16604456 COMMAND_SW OORMPEN
==> Exit leg pad time is 9.77 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 149:12:11:52
from CRM file: XE1RADZ0 = 149:12:11:52
==> CRM Pad Time: 9.774 ks and Backstop Pad Time: 9.77 ks agree.
2015:149:14:54:46.239 16604460 ACISPKT AA00000000
==> ACIS integration time of 8.27 ks.
2015:149:14:54:46.239 16604460 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:149:14:54:47.239 16604464 ACISPKT AA00000000
2015:149:14:54:51.239 16604479 ACISPKT AA00000000
2015:149:14:54:55.239 16604495 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:149:14:55:19.239 16604588 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2015:149:14:56:22.239 16604834 ACISPKT WT004DE034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004de034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2015:149:14:56:26.239 16604850 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,51861,OORMPEN,CSELFMT2,ENAB)
2015:149:14:56:30.239 16604866 ACISPKT RS_0000001
2015:149:14:56:34.239 16604881 ACISPKT RH_0000001
2015:149:14:57:46.239 16605162 MP_OBSID 17660
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17660:
Target Name: 30 Doradus SI Mode: TE_004DE
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 40 Remaining Exposure time: 0.5
Offset: Y: -0.2 Z: -0.25 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 15 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17660
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004DEB is WT004DE034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2015:149:15:00:46.449 16605865 SIMFOCUS -486
2015:149:15:02:12.949 16606203 SIMFOCUS -536
2015:150:02:18:07.239 16764464 ACISPKT AA00000000
==> ACIS integration time of 39.50 ks.
This is 98.75% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:150:02:18:07.239 16764464 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:150:02:20:06.415 16764929 SIMFOCUS -418
2015:150:02:21:07.239 16765166 MP_OBSID 16748
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16748:
Target Name: M28 SI Mode: TE_004A6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 30 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:150:02:21:25.175 16765236 SIMFOCUS -468
2015:150:02:30:43.919 16767416 ACISPKT AA00000000
2015:150:02:30:47.919 16767432 ACISPKT AA00000000
2015:150:02:30:51.919 16767448 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:150:02:31:15.919 16767541 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2015:150:02:32:18.919 16767787 ACISPKT WT004A6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a6024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:150:02:32:22.919 16767803 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16748
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A6B is WT004A6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16748,OORMPEN,CSELFMT2,ENAB)
2015:150:02:32:26.919 16767818 ACISPKT RS_0000001
2015:150:02:32:30.919 16767834 ACISPKT RH_0000001
2015:150:11:15:00.919 112959 ACISPKT AA00000000
==> ACIS integration time of 30.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:150:11:15:00.919 112959 SIMTRANS 90872 (ACIS-I)
==> THERE IS A Z-SIM OF -5.11 mm FOR THIS OBSERVATION.
2015:150:11:16:57.294 113414 SIMFOCUS -536
2015:150:11:18:00.919 113662 MP_OBSID 17156
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17156:
Target Name: RM J160319.0+031644.6 SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 14.6 Remaining Exposure time: 0
Offset: Y: -2 Z: -0.3 Z-sim: -5.12
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:150:11:34:04.645 117423 ACISPKT AA00000000
2015:150:11:34:08.645 117438 ACISPKT AA00000000
2015:150:11:34:12.645 117454 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:150:11:34:36.645 117548 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2015:150:11:35:39.645 117794 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:150:11:35:43.645 117809 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17156
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17156,OORMPEN,CSELFMT2,ENAB)
2015:150:11:35:47.645 117825 ACISPKT RS_0000001
2015:150:11:35:51.645 117840 ACISPKT RH_0000001
2015:150:15:53:47.083 178231 ORBPOINT EAPOGEE
2015:150:16:01:41.645 180084 ACISPKT AA00000000
==> ACIS integration time of 14.60 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:150:16:01:41.645 180084 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2015:150:16:04:41.645 180787 MP_OBSID 17220
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17220:
Target Name: Abell S753 SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 94 Remaining Exposure time: 6.78088099999999
Offset: Y: -1 Z: 0.4 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2015:150:16:40:36.265 189195 ACISPKT WSVIDALLDN
2015:150:16:40:54.265 189265 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2015:150:16:41:57.265 189511 ACISPKT WT00459034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00459034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2015:150:16:42:01.265 189527 ACISPKT RS_0000001
2015:150:16:42:05.265 189542 ACISPKT RH_0000001
2015:150:16:42:28.265 189632 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17220
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458 is WT00459034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17220,OORMPEN,CSELFMT2,ENAB)
2015:151:16:54:15.384 529562 ACISPKT AA00000000
==> ACIS integration time of 87.11 ks.
This is 92.67% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2015:151:16:54:15.384 529562 SIMTRANS -99616 (HRC-S)
2015:151:16:57:15.384 530265 MP_OBSID 51860
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51860:
No ocat info found for obsid 51860
2015:151:17:00:15.594 530968 SIMFOCUS -991
2015:151:17:01:41.094 531302 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2015:151:17:01:41.094 531302 ACISPKT AA00000000
2015:151:17:01:45.094 531317 ACISPKT AA00000000
2015:151:17:01:49.094 531333 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2015:151:17:02:13.094 531426 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2015:151:17:03:16.094 531672 ACISPKT WBTX_QUIET
2015:151:17:03:20.094 531688 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2015:151:17:03:24.094 531704 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51860
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51860,OORMPDS,CSELFMT2,ENAB)
2015:151:17:03:28.094 531719 ACISPKT RS_0000001
2015:151:17:03:32.094 531735 ACISPKT RH_0000001
2015:151:17:03:55.094 531825 ACISPKT RBTXINGALL
2015:151:17:06:11.094 532355 MP_OBSID 51859
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51859:
No ocat info found for obsid 51859
2015:151:19:45:21.094 569624 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2015:151:19:48:21.094 570326 ACISPKT AA00000000
2015:151:19:48:21.094 570326 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 151:19:48:21
from CRM file: EE1RADZ0 = 151:19:48:21
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2015:151:19:48:30.094 570361 ACISPKT WSVIDALLDN
2015:151:19:49:33.094 570607 ACISPKT RS_0000001
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 0 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
32 8 27 23 23 66
**NOTE: There are 3 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 1 1
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. A SIM Translation to ACIS occurs while RADMON is DISABLED.
o. There are ACIS observations for which the RadMon has not been enabled.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED