-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2016/MAR0516/oflsa/CR065_0403.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2016/MAR0516/oflsa/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-OUT,LETG-OUT,17719,OORMPDS,CSELFMT2,ENAB)
2016:065:04:27:00.000 388977 ACISPKT AA00000000
2016:065:04:27:03.000 388989 ACISPKT AA00000000
2016:065:04:28:02.000 389219 COMMAND_SW OORMPEN
==> Exit leg pad time is 5632.08 ks.
>>>ERROR: RadMon EN occurs well after an E1 exit (>15ks).
-OR- RadMon EN encountered prior to a XE1RADZ0/XEF1000.
2016:065:04:30:00.000 389679 MP_OBSID 51213
==> ObsID change occurs 2.9 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 51213:
No ocat info found for obsid 51213
2016:065:05:08:09.090 398612 AOENDITH AOENDITH
==> DITHER ENABLED
2016:065:05:14:49.090 400173 COMMAND_HW CSELFMT2
2016:065:05:14:49.090 400173 MP_OBSID 18168
LATEST OCAT INFO FOR OBSID 18168:
Target Name: V Zw 232 Notes 02 SI Mode: TE_00910
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:065:05:14:49.090 400173 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:065:05:36:58.803 405362 ACISPKT AA00000000
2016:065:05:37:02.803 405378 ACISPKT AA00000000
2016:065:05:37:06.803 405394 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:065:05:37:30.803 405487 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:065:05:38:33.803 405733 ACISPKT WT00910014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00910014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:065:05:38:37.803 405749 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18168
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00910B is WT00910014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18168,OORMPEN,CSELFMT2,ENAB)
2016:065:05:38:41.803 405764 ACISPKT RS_0000001
2016:065:05:38:45.803 405780 ACISPKT RH_0000001
2016:065:08:35:50.803 447243 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:065:08:38:50.803 447946 MP_OBSID 18091
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18091:
Target Name: 3CR 36 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:065:08:38:50.803 447946 ACISPKT AA00000000
2016:065:08:38:54.803 447961 ACISPKT AA00000000
2016:065:08:38:58.803 447977 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:065:08:39:22.803 448071 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2016:065:08:40:25.803 448317 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:065:08:40:29.803 448332 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18091
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18091,OORMPEN,CSELFMT2,ENAB)
2016:065:08:40:33.803 448348 ACISPKT RS_0000001
2016:065:08:40:37.803 448363 ACISPKT RH_0000001
2016:065:12:21:07.803 499993 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:065:12:24:07.803 500695 MP_OBSID 18157
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18157:
Target Name: 2MASX J18443076+2204277 SI Mode: TE_00910
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:065:12:43:45.821 505292 ACISPKT AA00000000
2016:065:12:43:49.821 505308 ACISPKT AA00000000
2016:065:12:43:53.821 505323 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:065:12:44:17.821 505417 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:065:12:45:20.821 505663 ACISPKT WT00910014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00910014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:065:12:45:24.821 505679 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18157
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00910B is WT00910014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18157,OORMPEN,CSELFMT2,ENAB)
2016:065:12:45:28.821 505694 ACISPKT RS_0000001
2016:065:12:45:32.821 505710 ACISPKT RH_0000001
2016:065:15:42:37.821 547173 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:065:15:45:37.821 547876 MP_OBSID 18725
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18725:
Target Name: HD97658 SI Mode: TE_00914
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2016:065:16:05:25.887 552512 ACISPKT AA00000000
2016:065:16:05:29.887 552528 ACISPKT AA00000000
2016:065:16:05:33.887 552543 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:065:16:05:57.887 552637 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:065:16:07:00.887 552883 ACISPKT WT00914014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00914014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:065:16:07:04.887 552898 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18725
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00914B is WT00914014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18725,OORMPEN,CSELFMT2,ENAB)
2016:065:16:07:08.887 552914 ACISPKT RS_0000001
2016:065:16:07:12.887 552930 ACISPKT RH_0000001
2016:065:21:54:35.887 634268 ACISPKT AA00000000
==> ACIS integration time of 20.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:065:21:54:35.887 634268 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:065:21:56:35.063 634733 SIMFOCUS -536
2016:065:21:57:35.887 634971 MP_OBSID 18276
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18276:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:065:21:57:35.887 634971 ACISPKT AA00000000
2016:065:21:57:39.887 634986 ACISPKT AA00000000
2016:065:21:57:43.887 635002 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:065:21:58:07.887 635095 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:065:21:59:10.887 635341 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:065:21:59:14.887 635357 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18276
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18276,OORMPEN,CSELFMT2,ENAB)
2016:065:21:59:18.887 635372 ACISPKT RS_0000001
2016:065:21:59:22.887 635388 ACISPKT RH_0000001
2016:065:23:35:01.508 657735 ORBPOINT EAPOGEE
2016:066:22:00:45.887 972883 ACISPKT AA00000000
==> ACIS integration time of 85.25 ks.
This is 170.51% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:066:22:00:45.887 972883 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:066:22:02:45.063 973348 SIMFOCUS -418
2016:066:22:03:45.887 973585 MP_OBSID 18201
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18201:
Target Name: SDSS J130125.26+291849.5 SI Mode: TE_00910
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 6 Remaining Exposure time: 6
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:066:22:03:45.887 973585 ACISPKT AA00000000
2016:066:22:03:49.887 973601 ACISPKT AA00000000
2016:066:22:03:53.887 973616 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:066:22:04:03.823 973655 SIMFOCUS -468
2016:066:22:04:17.887 973710 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:066:22:05:20.887 973956 ACISPKT WT00910014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00910014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:066:22:05:24.887 973972 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18201
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00910B is WT00910014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18201,OORMPEN,CSELFMT2,ENAB)
2016:066:22:05:28.887 973987 ACISPKT RS_0000001
2016:066:22:05:32.887 974003 ACISPKT RH_0000001
2016:066:23:55:57.887 999856 ACISPKT AA00000000
==> ACIS integration time of 6.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:066:23:58:57.887 1000559 MP_OBSID 18803
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18803:
Target Name: sigma Orionis SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.5 Remaining Exposure time: 3.5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time: 0.4
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time: 0.4
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:067:00:32:05.963 1008317 ACISPKT AA00000000
2016:067:00:32:09.963 1008333 ACISPKT AA00000000
2016:067:00:32:13.963 1008348 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:067:00:32:37.963 1008442 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:067:00:33:40.963 1008688 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:067:00:33:44.963 1008704 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18803
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18803,OORMPEN,CSELFMT2,ENAB)
2016:067:00:33:48.963 1008719 ACISPKT RS_0000001
2016:067:00:33:52.963 1008735 ACISPKT RH_0000001
2016:067:01:42:17.128 1024751 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:067:01:42:17.128 1024751 SIMTRANS -99616 (HRC-S)
2016:067:01:45:17.128 1025453 MP_OBSID 51212
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51212:
No ocat info found for obsid 51212
2016:067:01:47:53.562 1026064 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2016:067:01:47:53.562 1026064 ACISPKT AA00000000
2016:067:01:47:57.562 1026080 ACISPKT AA00000000
2016:067:01:48:01.562 1026095 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:067:01:48:25.562 1026189 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:067:01:49:28.562 1026435 ACISPKT WBTX_QUIET
2016:067:01:49:32.562 1026450 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:067:01:49:36.562 1026466 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51212
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51212,OORMPDS,CSELFMT2,ENAB)
2016:067:01:49:40.562 1026482 ACISPKT RS_0000001
2016:067:01:49:44.562 1026497 ACISPKT RH_0000001
2016:067:01:50:07.562 1026587 ACISPKT RBTXINGALL
2016:067:01:52:23.562 1027118 MP_OBSID 51211
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51211:
No ocat info found for obsid 51211
2016:067:03:10:22.140 1045375 MP_OBSID 51210
LATEST OCAT INFO FOR OBSID 51210:
No ocat info found for obsid 51210
2016:067:03:11:19.562 1045600 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
2016:067:03:14:19.562 1046302 ACISPKT AA00000000
2016:067:03:14:19.562 1046302 ORBPOINT EEF1000
==> Entry leg pad time is 5.19 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 067:03:14:19
from CRM file: EE1RADZ0 = 067:03:14:19
==> CRM Pad Time: 5.186 ks and Backstop Pad Time: 5.19 ks agree.
2016:067:03:14:28.562 1046337 ACISPKT WSVIDALLDN
2016:067:03:15:31.562 1046583 ACISPKT RS_0000001
2016:067:07:19:12.315 1063732 ORBPOINT EPERIGEE
2016:067:07:24:28.717 1104874 MP_OBSID 51209
LATEST OCAT INFO FOR OBSID 51209:
No ocat info found for obsid 51209
2016:067:11:44:45.706 1165819 MP_OBSID 51208
LATEST OCAT INFO FOR OBSID 51208:
No ocat info found for obsid 51208
2016:067:12:18:19.562 1173678 ACISPKT AA00000000
2016:067:12:18:19.562 1173678 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2016:067:12:18:23.562 1173693 ACISPKT AA00000000
2016:067:12:18:27.562 1173709 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:067:12:18:51.562 1173803 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2016:067:12:19:54.562 1174048 ACISPKT WBTX_QUIET
2016:067:12:19:58.562 1174064 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:067:12:20:02.562 1174080 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51208
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51208,OORMPDS,CSELFMT2,ENAB)
2016:067:12:20:06.562 1174095 ACISPKT RS_0000001
2016:067:12:20:10.562 1174111 ACISPKT RH_0000001
2016:067:12:20:33.562 1174201 ACISPKT RBTXINGALL
2016:067:14:23:51.562 1203071 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.53 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 067:12:18:19
from CRM file: XE1RADZ0 = 067:12:18:19
==> CRM Pad Time: 7.533 ks and Backstop Pad Time: 7.53 ks agree.
2016:067:14:23:52.562 1203075 ACISPKT AA00000000
==> ACIS integration time of 6.03 ks.
2016:067:14:23:52.562 1203075 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:067:14:23:53.562 1203079 ACISPKT AA00000000
2016:067:14:23:57.562 1203094 ACISPKT AA00000000
2016:067:14:24:01.562 1203110 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:067:14:24:25.562 1203203 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:067:14:25:28.562 1203449 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:067:14:25:32.562 1203465 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51208,OORMPEN,CSELFMT2,ENAB)
2016:067:14:25:36.562 1203481 ACISPKT RS_0000001
2016:067:14:25:40.562 1203496 ACISPKT RH_0000001
2016:067:14:26:52.562 1203777 MP_OBSID 17720
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17720:
Target Name: sigma Orionis SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.5 Remaining Exposure time: 3.5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time: 0.4
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time: 0.4
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17720
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:067:15:34:04.562 1219512 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:067:15:34:04.562 1219512 SIMTRANS -50504 (HRC-I)
2016:067:15:37:04.562 1220214 COMMAND_HW CSELFMT1
2016:067:15:37:04.562 1220214 MP_OBSID 18304
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18304:
No ACIS info found for obsid 18304.
This is an HRC-I observation.
2016:067:15:38:33.449 1220561 SIMFOCUS -716
2016:067:15:49:45.231 1223183 AOENDITH AOENDITH
==> DITHER ENABLED
2016:067:18:42:55.231 1263729 COMMAND_HW CSELFMT2
2016:067:18:42:55.231 1263729 MP_OBSID 18212
LATEST OCAT INFO FOR OBSID 18212:
Target Name: SDSSJ124829.45+341231.3 SI Mode: TE_0076A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 17 Remaining Exposure time: 17
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:067:18:42:55.231 1263729 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:067:18:47:24.118 1264778 SIMFOCUS -418
2016:067:18:48:46.478 1265100 SIMFOCUS -468
2016:067:19:05:14.220 1268954 ACISPKT AA00000000
2016:067:19:05:18.220 1268970 ACISPKT AA00000000
2016:067:19:05:22.220 1268986 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:067:19:05:46.220 1269079 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2016:067:19:06:49.220 1269325 ACISPKT WT0076A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0076a024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:067:19:06:53.220 1269341 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18212
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0076AB is WT0076A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18212,OORMPEN,CSELFMT2,ENAB)
2016:067:19:06:57.220 1269356 ACISPKT RS_0000001
2016:067:19:07:01.220 1269372 ACISPKT RH_0000001
2016:067:19:19:00.220 1272178 AOENDITH AOENDITH
==> DITHER ENABLED
2016:068:00:08:50.220 1340041 ACISPKT AA00000000
==> ACIS integration time of 17.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:068:00:08:50.220 1340041 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:068:00:10:49.396 1340506 SIMFOCUS -536
2016:068:00:11:50.220 1340744 MP_OBSID 18272
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18272:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:068:00:11:50.220 1340744 ACISPKT AA00000000
2016:068:00:11:54.220 1340759 ACISPKT AA00000000
2016:068:00:11:58.220 1340775 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:068:00:12:22.220 1340869 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:068:00:13:25.220 1341114 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:068:00:13:29.220 1341130 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18272
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18272,OORMPEN,CSELFMT2,ENAB)
2016:068:00:13:33.220 1341146 ACISPKT RS_0000001
2016:068:00:13:37.220 1341161 ACISPKT RH_0000001
2016:068:06:07:27.220 1424010 ACISPKT AA00000000
==> ACIS integration time of 20.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:068:06:10:27.220 1424712 MP_OBSID 51207
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51207:
No ocat info found for obsid 51207
2016:068:06:28:57.112 1429044 MP_OBSID 18790
LATEST OCAT INFO FOR OBSID 18790:
Target Name: MWC 560 SI Mode: TE_00C1E
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.24 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:068:06:28:57.112 1429044 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:068:06:30:56.288 1429509 SIMFOCUS -418
2016:068:06:32:15.048 1429816 SIMFOCUS -468
2016:068:06:59:01.160 1436084 ACISPKT AA00000000
2016:068:06:59:05.160 1436100 ACISPKT AA00000000
2016:068:06:59:09.160 1436115 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:068:06:59:33.160 1436209 ACISPKT WSPOW0A006
==> WSPOW COMMAND LOADS: Feps 1 2; S1 S3
2016:068:07:00:36.160 1436455 ACISPKT WT00C1E014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c1e014
fepCcdSelect = 10 7 5 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:068:07:00:40.160 1436470 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18790
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C1EB is WT00C1E014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18790,OORMPEN,CSELFMT2,ENAB)
2016:068:07:00:44.160 1436486 ACISPKT RS_0000001
2016:068:07:00:48.160 1436502 ACISPKT RH_0000001
2016:068:14:13:57.160 1537922 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:068:14:16:57.160 1538624 MP_OBSID 51206
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51206:
No ocat info found for obsid 51206
2016:068:15:02:24.877 1549269 MP_OBSID 18791
LATEST OCAT INFO FOR OBSID 18791:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 35 Remaining Exposure time: 35
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:068:15:02:24.877 1549269 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:068:15:02:42.566 1549321 ORBPOINT EAPOGEE
2016:068:15:04:24.053 1549734 SIMFOCUS -536
2016:068:15:05:24.877 1549972 ACISPKT AA00000000
2016:068:15:05:28.877 1549987 ACISPKT AA00000000
2016:068:15:05:32.877 1550003 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:068:15:05:56.877 1550097 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:068:15:06:59.877 1550342 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:068:15:07:03.877 1550358 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18791
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18791,OORMPEN,CSELFMT2,ENAB)
2016:068:15:07:07.877 1550374 ACISPKT RS_0000001
2016:068:15:07:11.877 1550389 ACISPKT RH_0000001
2016:069:01:11:01.877 1691775 ACISPKT AA00000000
==> ACIS integration time of 35.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:069:01:14:01.877 1692477 MP_OBSID 51205
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51205:
No ocat info found for obsid 51205
2016:069:01:32:28.143 1696794 MP_OBSID 18800
LATEST OCAT INFO FOR OBSID 18800:
Target Name: MWC 560 SI Mode: TE_00C1E
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.24 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:069:01:32:28.143 1696794 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:069:01:34:27.319 1697259 SIMFOCUS -418
2016:069:01:35:46.079 1697567 SIMFOCUS -468
2016:069:02:02:26.645 1703813 ACISPKT AA00000000
2016:069:02:02:30.645 1703828 ACISPKT AA00000000
2016:069:02:02:34.645 1703844 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:069:02:02:58.645 1703938 ACISPKT WSPOW0A006
==> WSPOW COMMAND LOADS: Feps 1 2; S1 S3
2016:069:02:04:01.645 1704183 ACISPKT WT00C1E014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c1e014
fepCcdSelect = 10 7 5 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:069:02:04:05.645 1704199 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18800
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C1EB is WT00C1E014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18800,OORMPEN,CSELFMT2,ENAB)
2016:069:02:04:09.645 1704215 ACISPKT RS_0000001
2016:069:02:04:13.645 1704230 ACISPKT RH_0000001
2016:069:09:17:22.645 1805651 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:069:09:20:22.645 1806353 MP_OBSID 51204
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51204:
No ocat info found for obsid 51204
2016:069:10:05:44.704 1816976 MP_OBSID 18792
LATEST OCAT INFO FOR OBSID 18792:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 22 Remaining Exposure time: 22
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:069:10:05:44.704 1816976 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:069:10:07:43.880 1817441 SIMFOCUS -536
2016:069:10:08:44.704 1817678 ACISPKT AA00000000
2016:069:10:08:48.704 1817694 ACISPKT AA00000000
2016:069:10:08:52.704 1817710 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:069:10:09:16.704 1817803 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:069:10:10:19.704 1818049 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:069:10:10:23.704 1818065 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18792
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18792,OORMPEN,CSELFMT2,ENAB)
2016:069:10:10:27.704 1818080 ACISPKT RS_0000001
2016:069:10:10:31.704 1818096 ACISPKT RH_0000001
2016:069:16:28:38.558 1906630 ACISPKT AA00000000
==> ACIS integration time of 21.46 ks.
This is 97.53% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:069:16:28:38.558 1906630 SIMTRANS -99616 (HRC-S)
2016:069:16:31:38.558 1907333 MP_OBSID 51203
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51203:
No ocat info found for obsid 51203
2016:069:16:34:38.768 1908036 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2016:069:16:34:38.768 1908036 ACISPKT AA00000000
2016:069:16:34:42.768 1908051 ACISPKT AA00000000
2016:069:16:34:46.768 1908067 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:069:16:35:10.768 1908161 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2016:069:16:36:13.768 1908406 ACISPKT WBTX_QUIET
2016:069:16:36:17.768 1908422 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:069:16:36:21.768 1908438 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51203
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51203,OORMPDS,CSELFMT2,ENAB)
2016:069:16:36:25.768 1908453 ACISPKT RS_0000001
2016:069:16:36:29.768 1908469 ACISPKT RH_0000001
2016:069:16:36:52.768 1908559 ACISPKT RBTXINGALL
2016:069:16:39:08.768 1909089 MP_OBSID 51202
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51202:
No ocat info found for obsid 51202
2016:069:17:51:02.658 1925924 MP_OBSID 51201
LATEST OCAT INFO FOR OBSID 51201:
No ocat info found for obsid 51201
2016:069:17:54:58.768 1926846 ACISPKT AA00000000
==> ACIS integration time of 3.32 ks.
2016:069:17:57:58.768 1927548 ACISPKT AA00000000
2016:069:17:57:58.768 1927548 ORBPOINT EEF1000
==> Entry leg pad time is 5.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 069:17:57:58
from CRM file: EE1RADZ0 = 069:17:57:58
==> CRM Pad Time: 5 ks and Backstop Pad Time: 5.00 ks agree.
2016:069:17:58:07.768 1927583 ACISPKT WSVIDALLDN
2016:069:17:59:10.768 1927829 ACISPKT RS_0000001
2016:069:21:36:46.610 1978779 MP_OBSID 51200
LATEST OCAT INFO FOR OBSID 51200:
No ocat info found for obsid 51200
2016:069:22:46:03.776 1986992 ORBPOINT EPERIGEE
2016:070:02:26:07.100 2046527 MP_OBSID 51199
LATEST OCAT INFO FOR OBSID 51199:
No ocat info found for obsid 51199
2016:070:04:09:27.590 2070724 MP_OBSID 51198
LATEST OCAT INFO FOR OBSID 51198:
No ocat info found for obsid 51198
2016:070:04:33:58.768 2076465 ACISPKT WSVIDALLDN
2016:070:04:33:58.768 2076465 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TN_000B4
2016:070:04:34:16.768 2076535 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2016:070:04:35:19.768 2076781 ACISPKT WT000B5024
ACIS PBLOCK LOADS:
parameterBlockId = 0x000b5024
fepCcdSelect = 7 0 1 2 3 6
fepMode = 0 # FEP_TE_MODE_RAW
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
>>>ERROR: There is no WBTX_QUIET command before loading the parameter block for a CTI measurement.
2016:070:04:35:23.768 2076797 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51198
---------------------------------------------------------------------------
==> Parameter Block for SI mode TN_000B4B is WT000B5024 and is stored.
>>>WARNING: This parameter block is NOT recalculating a bias
Please confirm the parameter block for 51198
This SI_MODE is TN_000B4. Previous SI_MODE is TE_007AC
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51198,OORMPDS,CSELFMT2,ENAB)
2016:070:04:35:27.768 2076812 ACISPKT RS_0000001
2016:070:04:35:31.768 2076828 ACISPKT RH_0000001
2016:070:06:08:31.768 2098604 ACISPKT AA00000000
==> ACIS integration time of 5.59 ks.
2016:070:06:11:30.768 2099302 COMMAND_SW OORMPEN
==> Exit leg pad time is 5.85 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 070:04:33:58
from CRM file: XE1RADZ0 = 070:04:33:58
==> CRM Pad Time: 5.853 ks and Backstop Pad Time: 5.85 ks agree.
2016:070:06:11:31.768 2099306 SIMTRANS 91744 (ACIS-I)
==> THERE IS A Z-SIM OF -2.92 mm FOR THIS OBSERVATION.
2016:070:06:11:32.768 2099310 ACISPKT AA00000000
2016:070:06:11:36.768 2099326 ACISPKT AA00000000
2016:070:06:11:40.768 2099341 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:070:06:12:04.768 2099435 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2016:070:06:13:07.768 2099681 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:070:06:13:11.768 2099696 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,51198,OORMPEN,CSELFMT2,ENAB)
2016:070:06:13:15.768 2099712 ACISPKT RS_0000001
2016:070:06:13:19.768 2099728 ACISPKT RH_0000001
2016:070:06:14:31.768 2100009 MP_OBSID 18469
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18469:
Target Name: MACSJ1331.5-1736 SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: -1 Z: -0.3 Z-sim: -2.925
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 18469
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:070:09:22:29.768 2144020 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:070:09:22:29.768 2144020 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:070:09:24:27.344 2144479 SIMFOCUS -418
2016:070:09:25:29.768 2144723 MP_OBSID 18194
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18194:
Target Name: SDSS J135602.89+182218.2 SI Mode: TE_00910
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:070:09:25:46.104 2144786 SIMFOCUS -468
2016:070:09:38:24.784 2147747 ACISPKT AA00000000
2016:070:09:38:28.784 2147763 ACISPKT AA00000000
2016:070:09:38:32.784 2147778 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:070:09:38:56.784 2147872 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:070:09:39:59.784 2148118 ACISPKT WT00910014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00910014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:070:09:40:03.784 2148134 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18194
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00910B is WT00910014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18194,OORMPEN,CSELFMT2,ENAB)
2016:070:09:40:07.784 2148149 ACISPKT RS_0000001
2016:070:09:40:11.784 2148165 ACISPKT RH_0000001
2016:070:12:37:16.784 2189628 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:070:12:40:16.784 2190331 MP_OBSID 18801
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18801:
Target Name: PSR J1709+2313 SI Mode: TE_00C28
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 32.7 Remaining Exposure time: 32.7
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.08 Range: 11.92
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2016:070:12:40:16.784 2190331 ACISPKT AA00000000
2016:070:12:40:20.784 2190346 ACISPKT AA00000000
2016:070:12:40:24.784 2190362 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:070:12:40:48.784 2190455 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2016:070:12:41:51.784 2190701 ACISPKT WT00C28014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c28014
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 2980
windowSlotIndex = 65535
2016:070:12:41:55.784 2190717 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18801
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C28B is WT00C28014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18801,OORMPEN,CSELFMT2,ENAB)
2016:070:12:41:59.784 2190733 ACISPKT RS_0000001
2016:070:12:42:03.784 2190748 ACISPKT RH_0000001
2016:070:21:23:22.784 2312813 ACISPKT AA00000000
==> ACIS integration time of 30.00 ks.
This is 91.74% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:070:21:23:22.784 2312813 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:070:21:25:21.960 2313278 SIMFOCUS -536
2016:070:21:26:22.784 2313515 MP_OBSID 18793
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18793:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 60 Remaining Exposure time: 60
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:070:21:29:35.839 2314268 ACISPKT AA00000000
2016:070:21:29:39.839 2314284 ACISPKT AA00000000
2016:070:21:29:43.839 2314300 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:070:21:30:07.839 2314393 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:070:21:31:10.839 2314639 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:070:21:31:14.839 2314655 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18793
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18793,OORMPEN,CSELFMT2,ENAB)
2016:070:21:31:18.839 2314670 ACISPKT RS_0000001
2016:070:21:31:22.839 2314686 ACISPKT RH_0000001
2016:071:06:29:44.524 2440741 ORBPOINT EAPOGEE
2016:071:14:31:52.839 2553632 ACISPKT AA00000000
==> ACIS integration time of 60.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:071:14:34:52.839 2554335 MP_OBSID 17213
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17213:
Target Name: PSZ1 G108.18-11.53 SI Mode: TE_0046C
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 27 Remaining Exposure time: 27
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2016:071:14:44:43.448 2556640 ACISPKT AA00000000
2016:071:14:44:47.448 2556655 ACISPKT AA00000000
2016:071:14:44:51.448 2556671 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:071:14:45:15.448 2556765 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2016:071:14:46:18.448 2557010 ACISPKT WT0046C034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0046c034
fepCcdSelect = 6 7 3 2 1 0
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:071:14:46:22.448 2557026 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17213
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0046CB is WT0046C034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17213,OORMPEN,CSELFMT2,ENAB)
2016:071:14:46:26.448 2557042 ACISPKT RS_0000001
2016:071:14:46:30.448 2557057 ACISPKT RH_0000001
2016:071:22:23:03.448 2663957 ACISPKT AA00000000
==> ACIS integration time of 26.00 ks.
This is 96.30% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:071:22:26:03.448 2664659 MP_OBSID 18417
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18417:
Target Name: E0102-72 I3,-120,-0.5,0.5,0 SI Mode: TE_0072A
Instrument: ACIS-I Grating: NONE Type: CAL
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: -0.6 Z: 0.5 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNNNNN
Subarray Type: CUSTOM Start: 768 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:071:23:04:56.895 2673765 ACISPKT AA00000000
2016:071:23:05:00.895 2673781 ACISPKT AA00000000
2016:071:23:05:04.895 2673797 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:071:23:05:28.895 2673890 ACISPKT WSPOW00802
==> WSPOW COMMAND LOADS: Feps 1; I3
2016:071:23:06:31.895 2674136 ACISPKT WT0072A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0072a024
fepCcdSelect = 10 3 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 767
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:071:23:06:35.895 2674152 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18417
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0072AB is WT0072A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18417,OORMPEN,CSELFMT2,ENAB)
2016:071:23:06:39.895 2674167 ACISPKT RS_0000001
2016:071:23:06:43.895 2674183 ACISPKT RH_0000001
2016:072:06:30:38.016 2778121 ACISPKT AA00000000
==> ACIS integration time of 26.01 ks.
This is 104.04% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:072:06:30:38.016 2778121 SIMTRANS -99616 (HRC-S)
2016:072:06:33:38.016 2778824 MP_OBSID 51197
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51197:
No ocat info found for obsid 51197
2016:072:06:36:38.226 2779527 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2016:072:06:36:38.226 2779527 ACISPKT AA00000000
2016:072:06:36:42.226 2779542 ACISPKT AA00000000
2016:072:06:36:46.226 2779558 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:06:37:10.226 2779652 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2016:072:06:38:13.226 2779898 ACISPKT WBTX_QUIET
2016:072:06:38:17.226 2779913 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:072:06:38:21.226 2779929 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51197
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51197,OORMPDS,CSELFMT2,ENAB)
2016:072:06:38:25.226 2779944 ACISPKT RS_0000001
2016:072:06:38:29.226 2779960 ACISPKT RH_0000001
2016:072:06:38:52.226 2780050 ACISPKT RBTXINGALL
2016:072:06:41:08.226 2780581 MP_OBSID 51196
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51196:
No ocat info found for obsid 51196
2016:072:08:11:24.821 2801718 MP_OBSID 51195
LATEST OCAT INFO FOR OBSID 51195:
No ocat info found for obsid 51195
2016:072:09:20:18.226 2817849 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2016:072:09:23:18.226 2818551 ACISPKT AA00000000
2016:072:09:23:18.226 2818551 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 072:09:23:18
from CRM file: EE1RADZ0 = 072:09:23:18
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2016:072:09:23:27.226 2818586 ACISPKT WSVIDALLDN
2016:072:09:24:30.226 2818832 ACISPKT RS_0000001
2016:072:14:06:08.474 2884777 MP_OBSID 51194
LATEST OCAT INFO FOR OBSID 51194:
No ocat info found for obsid 51194
2016:072:14:13:05.219 2884829 ORBPOINT EPERIGEE
2016:072:19:19:28.341 2958142 MP_OBSID 51193
LATEST OCAT INFO FOR OBSID 51193:
No ocat info found for obsid 51193
2016:072:19:33:18.226 2961381 ACISPKT AA00000000
2016:072:19:33:18.226 2961381 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2016:072:19:33:22.226 2961396 ACISPKT AA00000000
2016:072:19:33:26.226 2961412 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:19:33:50.226 2961506 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2016:072:19:34:53.226 2961751 ACISPKT WBTX_QUIET
2016:072:19:34:57.226 2961767 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:072:19:35:01.226 2961783 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51193
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51193,OORMPDS,CSELFMT2,ENAB)
2016:072:19:35:05.226 2961798 ACISPKT RS_0000001
2016:072:19:35:09.226 2961814 ACISPKT RH_0000001
2016:072:19:35:32.226 2961904 ACISPKT RBTXINGALL
2016:072:21:22:50.226 2987027 COMMAND_SW OORMPEN
==> Exit leg pad time is 6.57 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 072:19:33:18
from CRM file: XE1RADZ0 = 072:19:33:18
==> CRM Pad Time: 6.573 ks and Backstop Pad Time: 6.57 ks agree.
2016:072:21:22:51.226 2987031 ACISPKT AA00000000
==> ACIS integration time of 5.07 ks.
2016:072:21:22:51.226 2987031 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:072:21:23:42.820 2987233 ACISPKT AA00000000
2016:072:21:23:46.820 2987248 ACISPKT AA00000000
2016:072:21:23:50.820 2987264 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:21:24:14.820 2987358 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:072:21:25:17.820 2987603 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:072:21:25:21.820 2987619 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51193,OORMPEN,CSELFMT2,ENAB)
2016:072:21:25:25.820 2987635 ACISPKT RS_0000001
2016:072:21:25:29.820 2987650 ACISPKT RH_0000001
2016:072:21:25:51.226 2987734 MP_OBSID 17721
==> ObsID change occurs 2.1 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17721:
Target Name: sigma Orionis SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.5 Remaining Exposure time: 3.5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time: 0.4
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time: 0.4
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17721
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:072:21:28:27.660 2988344 SIMFOCUS -418
2016:072:21:29:46.420 2988652 SIMFOCUS -468
2016:072:22:33:53.820 3003666 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:072:22:36:53.820 3004368 MP_OBSID 16747
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16747:
Target Name: PSR J1709+2313 SI Mode: TE_00C28
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 27.3 Remaining Exposure time: 27.3
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.08 Range: 11.92
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2016:072:23:01:47.991 3010199 ACISPKT AA00000000
2016:072:23:01:51.991 3010215 ACISPKT AA00000000
2016:072:23:01:55.991 3010230 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:23:02:19.991 3010324 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2016:072:23:03:22.991 3010570 ACISPKT WT00C28014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c28014
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 2980
windowSlotIndex = 65535
2016:072:23:03:26.991 3010586 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16747
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C28B is WT00C28014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16747,OORMPEN,CSELFMT2,ENAB)
2016:072:23:03:30.991 3010601 ACISPKT RS_0000001
2016:072:23:03:34.991 3010617 ACISPKT RH_0000001
2016:073:06:21:33.991 3113169 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 91.58% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:073:06:21:33.991 3113169 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:073:06:23:33.167 3113634 SIMFOCUS -536
2016:073:06:24:33.991 3113872 MP_OBSID 18628
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18628:
Target Name: CODEX 43403 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 8 Remaining Exposure time: 8
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:073:06:45:31.181 3118778 ACISPKT AA00000000
2016:073:06:45:35.181 3118793 ACISPKT AA00000000
2016:073:06:45:39.181 3118809 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:073:06:46:03.181 3118903 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:073:06:47:06.181 3119148 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:073:06:47:10.181 3119164 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18628
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18628,OORMPEN,CSELFMT2,ENAB)
2016:073:06:47:14.181 3119180 ACISPKT RS_0000001
2016:073:06:47:18.181 3119195 ACISPKT RH_0000001
2016:073:09:21:08.181 3155215 ACISPKT AA00000000
==> ACIS integration time of 8.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:073:09:24:08.181 3155917 MP_OBSID 51192
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51192:
No ocat info found for obsid 51192
2016:073:09:42:04.156 3160116 MP_OBSID 18761
LATEST OCAT INFO FOR OBSID 18761:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:073:10:22:21.363 3169549 ACISPKT WSVIDALLDN
2016:073:10:22:39.363 3169619 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:073:10:23:42.363 3169865 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:073:10:23:46.363 3169881 ACISPKT RS_0000001
2016:073:10:23:50.363 3169896 ACISPKT RH_0000001
2016:073:10:24:13.363 3169986 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18761
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18761,OORMPEN,CSELFMT2,ENAB)
2016:073:21:56:34.601 3170429 ORBPOINT EAPOGEE
2016:073:23:42:21.363 3356866 ACISPKT AA00000000
==> ACIS integration time of 47.89 ks.
This is 95.78% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:073:23:42:21.363 3356866 SIMTRANS -99616 (HRC-S)
2016:073:23:45:21.363 3357569 COMMAND_HW CSELFMT4
2016:073:23:45:21.363 3357569 MP_OBSID 17323
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17323:
No ACIS info found for obsid 17323.
This is an HRC-S observation.
2016:073:23:45:55.702 3357703 COMMAND_SW 4OLETGIN
2016:073:23:47:47.073 3358137 AOENDITH AOENDITH
==> DITHER ENABLED
2016:073:23:48:21.573 3358272 SIMFOCUS -991
2016:073:23:49:39.163 3358575 COMMAND_HW CSELFMT1
2016:074:05:27:37.963 3437712 MP_OBSID 51191
LATEST OCAT INFO FOR OBSID 51191:
No ocat info found for obsid 51191
2016:074:06:08:48.030 3447351 AOENDITH AOENDITH
==> DITHER ENABLED
2016:074:06:15:28.030 3448912 COMMAND_HW CSELFMT4
2016:074:06:15:28.030 3448912 MP_OBSID 18420
LATEST OCAT INFO FOR OBSID 18420:
Target Name: E0102-72 S3,-120,1,0,0 SI Mode: TE_00B76
Instrument: ACIS-S Grating: NONE Type: CAL
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: -3.7095 Z: 0 Z-sim: 10.53
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 769 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:074:06:15:28.030 3448912 SIMTRANS 79808 (ACIS-S)
==> THERE IS A Z-SIM OF 10.52 mm FOR THIS OBSERVATION.
2016:074:06:16:02.369 3449046 COMMAND_SW 4OLETGRE
2016:074:06:19:45.830 3449918 COMMAND_HW CSELFMT2
2016:074:06:21:10.225 3450247 SIMFOCUS -418
2016:074:06:22:38.085 3450590 SIMFOCUS -468
2016:074:06:36:46.584 3453901 ACISPKT AA00000000
2016:074:06:36:50.584 3453917 ACISPKT AA00000000
2016:074:06:36:54.584 3453933 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:06:37:18.584 3454026 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:074:06:38:21.584 3454272 ACISPKT WT00B76014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b76014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 768
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:074:06:38:25.584 3454288 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18420
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B76B is WT00B76014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18420,OORMPEN,CSELFMT2,ENAB)
2016:074:06:38:29.584 3454303 ACISPKT RS_0000001
2016:074:06:38:33.584 3454319 ACISPKT RH_0000001
2016:074:12:22:21.584 3534819 ACISPKT AA00000000
==> ACIS integration time of 20.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:074:12:25:21.584 3535521 MP_OBSID 51190
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51190:
No ocat info found for obsid 51190
2016:074:12:55:50.610 3542659 MP_OBSID 18794
LATEST OCAT INFO FOR OBSID 18794:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 36 Remaining Exposure time: 36
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:074:12:55:50.610 3542659 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:074:12:57:44.025 3543101 SIMFOCUS -536
2016:074:13:21:15.086 3548608 ACISPKT AA00000000
2016:074:13:21:19.086 3548624 ACISPKT AA00000000
2016:074:13:21:23.086 3548639 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:13:21:47.086 3548733 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:074:13:22:50.086 3548979 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:074:13:22:54.086 3548994 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18794
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18794,OORMPEN,CSELFMT2,ENAB)
2016:074:13:22:58.086 3549010 ACISPKT RS_0000001
2016:074:13:23:02.086 3549025 ACISPKT RH_0000001
2016:074:23:48:11.175 3695403 ACISPKT AA00000000
==> ACIS integration time of 36.28 ks.
This is 100.78% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:074:23:48:11.175 3695403 SIMTRANS -99616 (HRC-S)
2016:074:23:51:11.175 3696105 MP_OBSID 51189
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51189:
No ocat info found for obsid 51189
2016:074:23:54:11.385 3696808 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2016:074:23:54:11.385 3696808 ACISPKT AA00000000
2016:074:23:54:15.385 3696824 ACISPKT AA00000000
2016:074:23:54:19.385 3696839 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:23:54:43.385 3696933 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:074:23:55:46.385 3697179 ACISPKT WBTX_QUIET
2016:074:23:55:50.385 3697195 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:074:23:55:54.385 3697210 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51189
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51189,OORMPDS,CSELFMT2,ENAB)
2016:074:23:55:58.385 3697226 ACISPKT RS_0000001
2016:074:23:56:02.385 3697241 ACISPKT RH_0000001
2016:074:23:56:25.385 3697331 ACISPKT RBTXINGALL
2016:074:23:58:41.385 3697862 MP_OBSID 51188
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51188:
No ocat info found for obsid 51188
2016:075:01:33:37.385 3720090 ACISPKT AA00000000
==> ACIS integration time of 4.46 ks.
2016:075:01:36:37.385 3720793 ACISPKT AA00000000
2016:075:01:36:37.385 3720793 ORBPOINT EEF1000
==> Entry leg pad time is 6.15 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 075:01:36:37
from CRM file: EE1RADZ0 = 075:01:36:37
==> CRM Pad Time: 6.146 ks and Backstop Pad Time: 6.15 ks agree.
2016:075:01:36:46.385 3720828 ACISPKT WSVIDALLDN
2016:075:01:37:49.385 3721074 ACISPKT RS_0000001
2016:075:02:33:14.746 3734051 MP_OBSID 51187
==> ObsID change occurs 56.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51187:
No ocat info found for obsid 51187
2016:075:05:21:51.633 3773531 MP_OBSID 51186
LATEST OCAT INFO FOR OBSID 51186:
No ocat info found for obsid 51186
2016:075:05:40:33.053 3773583 ORBPOINT EPERIGEE
2016:075:10:19:55.204 3843321 MP_OBSID 51185
LATEST OCAT INFO FOR OBSID 51185:
No ocat info found for obsid 51185
2016:075:10:46:37.385 3849573 ACISPKT WSVIDALLDN
2016:075:10:46:37.385 3849573 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TN_000B6
2016:075:10:46:55.385 3849644 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:075:10:47:58.385 3849889 ACISPKT WT000B7024
ACIS PBLOCK LOADS:
parameterBlockId = 0x000b7024
fepCcdSelect = 7 5 4 8 9 6
fepMode = 0 # FEP_TE_MODE_RAW
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
>>>ERROR: There is no WBTX_QUIET command before loading the parameter block for a CTI measurement.
2016:075:10:48:02.385 3849905 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51185
---------------------------------------------------------------------------
==> Parameter Block for SI mode TN_000B6B is WT000B7024 and is stored.
>>>WARNING: This parameter block is NOT recalculating a bias
Please confirm the parameter block for 51185
This SI_MODE is TN_000B6. Previous SI_MODE is TE_007AE
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51185,OORMPDS,CSELFMT2,ENAB)
2016:075:10:48:06.385 3849921 ACISPKT RS_0000001
2016:075:10:48:10.385 3849936 ACISPKT RH_0000001
2016:075:12:45:10.385 3877331 ACISPKT AA00000000
==> ACIS integration time of 7.03 ks.
2016:075:12:48:09.385 3878030 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.29 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 075:10:46:37
from CRM file: XE1RADZ0 = 075:10:46:37
==> CRM Pad Time: 7.293 ks and Backstop Pad Time: 7.29 ks agree.
2016:075:12:48:10.385 3878034 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:075:12:48:40.979 3878153 ACISPKT AA00000000
2016:075:12:48:44.979 3878169 ACISPKT AA00000000
2016:075:12:48:48.979 3878184 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:12:49:12.979 3878278 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:075:12:50:15.979 3878524 ACISPKT WT00AE8014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00ae8014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 359
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:075:12:50:19.979 3878540 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51185,OORMPEN,CSELFMT2,ENAB)
2016:075:12:50:23.979 3878555 ACISPKT RS_0000001
2016:075:12:50:27.979 3878571 ACISPKT RH_0000001
2016:075:12:51:10.385 3878736 MP_OBSID 18418
==> ObsID change occurs 2.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18418:
Target Name: E0102-72 S3,-120,1,0,0 SI Mode: TE_00AE8
Instrument: ACIS-S Grating: NONE Type: CAL
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0.8 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 360 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 18418
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00AE8B is WT00AE8014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:075:12:53:46.819 3879347 SIMFOCUS -418
2016:075:12:55:05.579 3879654 SIMFOCUS -468
2016:075:17:10:52.979 3939546 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:075:17:13:52.979 3940249 MP_OBSID 17722
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17722:
Target Name: sigma Orionis SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.5 Remaining Exposure time: 3.5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time: 0.4
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time: 0.4
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:075:17:32:51.600 3944692 ACISPKT AA00000000
2016:075:17:32:55.600 3944708 ACISPKT AA00000000
2016:075:17:32:59.600 3944723 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:17:33:23.600 3944817 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:075:17:34:26.600 3945063 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:075:17:34:30.600 3945079 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17722
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17722,OORMPEN,CSELFMT2,ENAB)
2016:075:17:34:34.600 3945094 ACISPKT RS_0000001
2016:075:17:34:38.600 3945110 ACISPKT RH_0000001
2016:075:18:43:02.600 3961125 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:075:18:46:02.600 3961828 MP_OBSID 51184
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51184:
No ocat info found for obsid 51184
2016:075:19:20:26.935 3969884 MP_OBSID 18275
LATEST OCAT INFO FOR OBSID 18275:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:075:19:20:26.935 3969884 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:075:19:22:26.111 3970349 SIMFOCUS -536
2016:075:19:31:36.375 3972496 ACISPKT AA00000000
2016:075:19:31:40.375 3972512 ACISPKT AA00000000
2016:075:19:31:44.375 3972528 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:19:32:08.375 3972621 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:075:19:33:11.375 3972867 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:075:19:33:15.375 3972883 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18275
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18275,OORMPEN,CSELFMT2,ENAB)
2016:075:19:33:19.375 3972898 ACISPKT RS_0000001
2016:075:19:33:23.375 3972914 ACISPKT RH_0000001
2016:076:09:47:13.375 4172836 ACISPKT AA00000000
==> ACIS integration time of 50.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:076:09:50:13.375 4173538 MP_OBSID 51183
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51183:
No ocat info found for obsid 51183
2016:076:10:37:23.560 4184583 COMMAND_HW CSELFMT4
2016:076:10:37:23.560 4184583 MP_OBSID 18619
LATEST OCAT INFO FOR OBSID 18619:
Target Name: SMC X-1 SI Mode: TE_009E8
Instrument: ACIS-S Grating: HETG Type: TOO
Exposure Time: 34 Remaining Exposure time: 34
Offset: Y: 0 Z: -0.3 Z-sim: -6.14
ACIS Exposure Mode: TE Event TM Format: G Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: CUSTOM Start: 1 Rows: 512 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:076:10:37:23.560 4184583 SIMTRANS 73176 (ACIS-S)
==> THERE IS A Z-SIM OF -6.16 mm FOR THIS OBSERVATION.
2016:076:10:37:57.899 4184717 COMMAND_SW 4OHETGIN
2016:076:10:39:26.095 4185061 SIMFOCUS -418
2016:076:10:40:44.855 4185369 SIMFOCUS -468
2016:076:10:41:41.360 4185589 COMMAND_HW CSELFMT2
2016:076:10:51:19.461 4187845 ACISPKT AA00000000
2016:076:10:51:23.461 4187861 ACISPKT AA00000000
2016:076:10:51:27.461 4187876 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:076:10:51:51.461 4187970 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:076:10:52:54.461 4188216 ACISPKT WT009E8024
ACIS PBLOCK LOADS:
parameterBlockId = 0x009e8024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 2 # BEP_TE_MODE_GRADED
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 511
primaryExposure = 17
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:076:10:52:58.461 4188231 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18619
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_009E8B is WT009E8024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18619,OORMPEN,CSELFMT2,ENAB)
2016:076:10:53:02.461 4188247 ACISPKT RS_0000001
2016:076:10:53:06.461 4188263 ACISPKT RH_0000001
2016:076:13:24:05.336 4193177 ORBPOINT EAPOGEE
2016:076:20:03:40.461 4317176 ACISPKT AA00000000
==> ACIS integration time of 32.00 ks.
This is 94.12% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:076:20:06:40.461 4317878 MP_OBSID 51182
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51182:
No ocat info found for obsid 51182
2016:076:20:36:47.196 4324929 COMMAND_HW CSELFMT4
2016:076:20:36:47.196 4324929 MP_OBSID 18795
LATEST OCAT INFO FOR OBSID 18795:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 57 Remaining Exposure time: 57
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:076:20:36:47.196 4324929 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:076:20:37:21.535 4325063 COMMAND_SW 4OHETGRE
2016:076:20:38:49.731 4325407 SIMFOCUS -536
2016:076:20:41:04.996 4325935 COMMAND_HW CSELFMT2
2016:076:21:04:39.892 4331457 ACISPKT AA00000000
2016:076:21:04:43.892 4331472 ACISPKT AA00000000
2016:076:21:04:47.892 4331488 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:076:21:05:11.892 4331582 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:076:21:06:14.892 4331827 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:076:21:06:18.892 4331843 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18795
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18795,OORMPEN,CSELFMT2,ENAB)
2016:076:21:06:22.892 4331859 ACISPKT RS_0000001
2016:076:21:06:26.892 4331874 ACISPKT RH_0000001
2016:077:13:21:25.649 4560162 ACISPKT AA00000000
==> ACIS integration time of 57.27 ks.
This is 100.47% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:077:13:21:25.649 4560162 SIMTRANS -99616 (HRC-S)
2016:077:13:24:25.649 4560865 MP_OBSID 51181
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51181:
No ocat info found for obsid 51181
2016:077:13:27:25.859 4561568 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00C60
2016:077:13:27:25.859 4561568 ACISPKT AA00000000
2016:077:13:27:29.859 4561584 ACISPKT AA00000000
2016:077:13:27:33.859 4561599 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:077:13:27:57.859 4561693 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2016:077:13:29:00.859 4561939 ACISPKT WBTX_QUIET
2016:077:13:29:04.859 4561954 ACISPKT WT00C60014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c60014
fepCcdSelect = 10 7 3 2 1 0
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:077:13:29:08.859 4561970 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51181
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C60B is WT00C60014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51181,OORMPDS,CSELFMT2,ENAB)
2016:077:13:29:12.859 4561986 ACISPKT RS_0000001
2016:077:13:29:16.859 4562001 ACISPKT RH_0000001
2016:077:13:29:39.859 4562091 ACISPKT RBTXINGALL
2016:077:13:31:55.859 4562622 MP_OBSID 51180
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51180:
No ocat info found for obsid 51180
2016:077:14:27:31.921 4575641 MP_OBSID 51179
LATEST OCAT INFO FOR OBSID 51179:
No ocat info found for obsid 51179
2016:077:15:34:00.631 4591206 MP_OBSID 51178
LATEST OCAT INFO FOR OBSID 51178:
No ocat info found for obsid 51178
2016:077:16:01:29.044 4597639 MP_OBSID 51177
LATEST OCAT INFO FOR OBSID 51177:
No ocat info found for obsid 51177
2016:077:16:11:05.859 4599890 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2016:077:16:14:05.859 4600593 ACISPKT AA00000000
2016:077:16:14:05.859 4600593 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 077:16:14:05
from CRM file: EE1RADZ0 = 077:16:14:05
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2016:077:16:14:14.859 4600628 ACISPKT WSVIDALLDN
2016:077:16:15:17.859 4600874 ACISPKT RS_0000001
2016:077:20:11:42.492 4656228 MP_OBSID 51176
LATEST OCAT INFO FOR OBSID 51176:
No ocat info found for obsid 51176
2016:077:21:07:55.763 4666241 ORBPOINT EPERIGEE
2016:078:02:34:42.429 4745906 MP_OBSID 51175
LATEST OCAT INFO FOR OBSID 51175:
No ocat info found for obsid 51175
2016:078:02:58:05.859 4751383 MP_OBSID 51174
LATEST OCAT INFO FOR OBSID 51174:
No ocat info found for obsid 51174
2016:078:02:58:05.859 4751383 ACISPKT AA00000000
2016:078:02:58:05.859 4751383 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00CA8
2016:078:02:58:09.859 4751399 ACISPKT AA00000000
2016:078:02:58:13.859 4751414 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:02:58:37.859 4751508 ACISPKT WSPOW3E03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S1 S2 S3 S4 S5
2016:078:02:59:40.859 4751754 ACISPKT WBTX_QUIET
2016:078:02:59:44.859 4751769 ACISPKT WT00CA8014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00ca8014
fepCcdSelect = 10 7 5 6 9 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:078:02:59:48.859 4751785 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51174
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00CA8B is WT00CA8014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51174,OORMPDS,CSELFMT2,ENAB)
2016:078:02:59:52.859 4751801 ACISPKT RS_0000001
2016:078:02:59:56.859 4751816 ACISPKT RH_0000001
2016:078:03:00:19.859 4751906 ACISPKT RBTXINGALL
2016:078:03:11:46.994 4754587 MP_OBSID 51173
==> ObsID change occurs 13.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51173:
No ocat info found for obsid 51173
2016:078:04:06:48.372 4767471 COMMAND_HW CSELFMT4
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2016:078:04:07:22.711 4767605 COMMAND_SW 4OHETGIN
2016:078:04:11:06.172 4768477 COMMAND_HW CSELFMT2
2016:078:04:18:25.859 4770193 ACISPKT AA00000000
==> ACIS integration time of 0.66 ks.
2016:078:04:21:24.859 4770891 COMMAND_SW OORMPEN
==> Exit leg pad time is 5.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 078:02:58:05
from CRM file: XE1RADZ0 = 078:02:58:05
==> CRM Pad Time: 5 ks and Backstop Pad Time: 5.00 ks agree.
2016:078:04:21:25.859 4770895 MP_OBSID 18144
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18144:
Target Name: Mkn 876 SI Mode: TE_0088E
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:078:04:21:25.859 4770895 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:078:04:21:26.859 4770899 ACISPKT AA00000000
2016:078:04:21:30.859 4770915 ACISPKT AA00000000
2016:078:04:21:34.859 4770930 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:04:21:58.859 4771024 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:078:04:23:01.859 4771270 ACISPKT WT0088E024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0088e024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:078:04:23:05.859 4771285 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18144
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0088EB is WT0088E024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18144,OORMPEN,CSELFMT2,ENAB)
2016:078:04:23:09.859 4771301 ACISPKT RS_0000001
2016:078:04:23:13.859 4771317 ACISPKT RH_0000001
2016:078:04:27:02.293 4772208 SIMFOCUS -418
2016:078:04:28:21.053 4772515 SIMFOCUS -468
2016:078:17:24:46.859 4954314 ACISPKT AA00000000
==> ACIS integration time of 45.50 ks.
This is 91.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:078:17:24:46.859 4954314 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:078:17:26:46.035 4954779 SIMFOCUS -536
2016:078:17:27:46.859 4955016 COMMAND_HW CSELFMT4
2016:078:17:27:46.859 4955016 MP_OBSID 18796
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18796:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:078:17:28:21.198 4955150 COMMAND_SW 4OHETGRE
2016:078:17:32:04.659 4956022 COMMAND_HW CSELFMT2
2016:078:17:32:37.459 4956150 ACISPKT AA00000000
2016:078:17:32:41.459 4956166 ACISPKT AA00000000
2016:078:17:32:45.459 4956182 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:17:33:09.459 4956275 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:078:17:34:12.459 4956521 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:078:17:34:16.459 4956537 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18796
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18796,OORMPEN,CSELFMT2,ENAB)
2016:078:17:34:20.459 4956552 ACISPKT RS_0000001
2016:078:17:34:24.459 4956568 ACISPKT RH_0000001
2016:079:04:51:58.791 4961338 ORBPOINT EAPOGEE
2016:079:07:48:14.459 5156490 ACISPKT AA00000000
==> ACIS integration time of 50.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:079:07:48:14.459 5156490 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:079:07:50:13.635 5156955 SIMFOCUS -418
2016:079:07:51:14.459 5157193 COMMAND_HW CSELFMT4
2016:079:07:51:14.459 5157193 MP_OBSID 18145
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18145:
Target Name: Mkn 876 SI Mode: TE_0088E
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:079:07:51:32.395 5157263 SIMFOCUS -468
2016:079:07:51:48.798 5157327 COMMAND_SW 4OHETGIN
2016:079:07:55:32.259 5158199 COMMAND_HW CSELFMT2
2016:079:07:56:05.059 5158327 ACISPKT AA00000000
2016:079:07:56:09.059 5158342 ACISPKT AA00000000
2016:079:07:56:13.059 5158358 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:079:07:56:37.059 5158452 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:079:07:57:40.059 5158698 ACISPKT WT0088E024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0088e024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:079:07:57:44.059 5158713 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18145
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0088EB is WT0088E024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18145,OORMPEN,CSELFMT2,ENAB)
2016:079:07:57:48.059 5158729 ACISPKT RS_0000001
2016:079:07:57:52.059 5158744 ACISPKT RH_0000001
2016:079:15:01:05.059 5257839 ACISPKT AA00000000
==> ACIS integration time of 24.00 ks.
This is 96.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:079:15:01:05.059 5257839 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:079:15:03:04.235 5258304 SIMFOCUS -536
2016:079:15:04:05.059 5258542 COMMAND_HW CSELFMT4
2016:079:15:04:05.059 5258542 MP_OBSID 18797
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18797:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 46 Remaining Exposure time: 46
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:079:15:04:39.398 5258676 COMMAND_SW 4OHETGRE
2016:079:15:08:22.859 5259548 COMMAND_HW CSELFMT2
2016:079:15:08:55.659 5259676 ACISPKT AA00000000
2016:079:15:08:59.659 5259691 ACISPKT AA00000000
2016:079:15:09:03.659 5259707 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:079:15:09:27.659 5259800 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:079:15:10:30.659 5260046 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:079:15:10:34.659 5260062 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18797
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18797,OORMPEN,CSELFMT2,ENAB)
2016:079:15:10:38.659 5260078 ACISPKT RS_0000001
2016:079:15:10:42.659 5260093 ACISPKT RH_0000001
2016:080:05:00:45.526 5454446 ACISPKT AA00000000
==> ACIS integration time of 48.57 ks.
This is 105.59% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:080:05:00:45.526 5454446 SIMTRANS -99616 (HRC-S)
2016:080:05:03:45.526 5455149 MP_OBSID 51172
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51172:
No ocat info found for obsid 51172
2016:080:05:06:45.736 5455852 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00C60
2016:080:05:06:45.736 5455852 ACISPKT AA00000000
2016:080:05:06:49.736 5455867 ACISPKT AA00000000
2016:080:05:06:53.736 5455883 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:080:05:07:17.736 5455977 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2016:080:05:08:20.736 5456223 ACISPKT WBTX_QUIET
2016:080:05:08:24.736 5456238 ACISPKT WT00C60014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c60014
fepCcdSelect = 10 7 3 2 1 0
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:080:05:08:28.736 5456254 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51172
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C60B is WT00C60014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51172,OORMPDS,CSELFMT2,ENAB)
2016:080:05:08:32.736 5456269 ACISPKT RS_0000001
2016:080:05:08:36.736 5456285 ACISPKT RH_0000001
2016:080:05:08:59.736 5456375 ACISPKT RBTXINGALL
2016:080:05:11:15.736 5456905 MP_OBSID 51171
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51171:
No ocat info found for obsid 51171
2016:080:07:22:02.418 5487527 MP_OBSID 51170
LATEST OCAT INFO FOR OBSID 51170:
No ocat info found for obsid 51170
2016:080:07:50:25.736 5494174 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2016:080:07:53:25.736 5494876 ACISPKT AA00000000
2016:080:07:53:25.736 5494876 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 080:07:53:25
from CRM file: EE1RADZ0 = 080:07:53:25
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2016:080:07:53:34.736 5494911 ACISPKT WSVIDALLDN
2016:080:07:54:37.736 5495157 ACISPKT RS_0000001
2016:080:08:45:42.368 5507117 MP_OBSID 51169
==> ObsID change occurs 52.3 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51169:
No ocat info found for obsid 51169
2016:080:11:53:11.883 5551017 MP_OBSID 51168
LATEST OCAT INFO FOR OBSID 51168:
No ocat info found for obsid 51168
2016:080:12:35:28.980 5559577 ORBPOINT EPERIGEE
2016:080:12:40:35.185 5562113 MP_OBSID 51167
LATEST OCAT INFO FOR OBSID 51167:
No ocat info found for obsid 51167
2016:080:16:59:34.836 5622756 MP_OBSID 51166
LATEST OCAT INFO FOR OBSID 51166:
No ocat info found for obsid 51166
2016:080:17:45:25.736 5633491 ACISPKT AA00000000
2016:080:17:45:25.736 5633491 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00C60
2016:080:17:45:29.736 5633507 ACISPKT AA00000000
2016:080:17:45:33.736 5633522 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:080:17:45:57.736 5633616 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2016:080:17:47:00.736 5633862 ACISPKT WBTX_QUIET
2016:080:17:47:04.736 5633877 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51166
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C60B is WT00C60014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51166,OORMPDS,CSELFMT2,ENAB)
2016:080:17:47:08.736 5633893 ACISPKT RS_0000001
2016:080:17:47:12.736 5633909 ACISPKT RH_0000001
2016:080:17:47:35.736 5633998 ACISPKT RBTXINGALL
2016:080:18:32:25.583 5644495 MP_OBSID 51165
==> ObsID change occurs 46.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51165:
No ocat info found for obsid 51165
2016:080:19:56:57.736 5664289 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.89 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 080:17:45:25
from CRM file: XE1RADZ0 = 080:17:45:25
==> CRM Pad Time: 7.893 ks and Backstop Pad Time: 7.89 ks agree.
2016:080:19:56:58.736 5664293 ACISPKT AA00000000
==> ACIS integration time of 7.79 ks.
2016:080:19:56:58.736 5664293 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:080:19:56:59.736 5664297 ACISPKT AA00000000
2016:080:19:57:03.736 5664313 ACISPKT AA00000000
2016:080:19:57:07.736 5664328 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:080:19:57:31.736 5664422 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:080:19:58:34.736 5664668 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:080:19:58:38.736 5664683 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,51165,OORMPEN,CSELFMT2,ENAB)
2016:080:19:58:42.736 5664699 ACISPKT RS_0000001
2016:080:19:58:46.736 5664715 ACISPKT RH_0000001
2016:080:19:59:58.736 5664996 MP_OBSID 18798
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18798:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 18798
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:080:23:55:56.736 5720246 ACISPKT AA00000000
==> ACIS integration time of 13.00 ks.
This is 86.67% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:080:23:55:56.736 5720246 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:080:23:57:55.912 5720711 SIMFOCUS -418
2016:080:23:58:56.736 5720949 COMMAND_HW CSELFMT4
2016:080:23:58:56.736 5720949 MP_OBSID 18799
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18799:
Target Name: Mkn 876 SI Mode: TE_0088E
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:080:23:59:14.672 5721019 SIMFOCUS -468
2016:080:23:59:31.075 5721083 COMMAND_SW 4OHETGIN
2016:081:00:03:14.536 5721955 COMMAND_HW CSELFMT2
2016:081:00:03:47.336 5722083 ACISPKT AA00000000
2016:081:00:03:51.336 5722098 ACISPKT AA00000000
2016:081:00:03:55.336 5722114 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:081:00:04:19.336 5722208 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:081:00:05:22.336 5722454 ACISPKT WT0088E024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0088e024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:081:00:05:26.336 5722469 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18799
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0088EB is WT0088E024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18799,OORMPEN,CSELFMT2,ENAB)
2016:081:00:05:30.336 5722485 ACISPKT RS_0000001
2016:081:00:05:34.336 5722500 ACISPKT RH_0000001
2016:081:07:25:27.336 5825498 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 0 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
88 9 55 49 49 149
**NOTE: There are 6 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
1 1 4 3
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. Either Radmon was NOT ENABLED at least 15 ks after an electron 1 exit.
-OR- Radmon was NOT enabled after electron 1 exit.
o. The OBSID change to 51213 that occurs less than 3 mins after a stop science.
o. There is no WBTX_QUIET command before loading the parameter block for a CTI measurement.
o. There is a change from FMT2 before an ACIS stop science.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED