-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2016/MAR1116/oflsb/CR071_1908.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2016/MAR1116/oflsb/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (ACIS-I,HETG-OUT,LETG-OUT,18793,OORMPEN,CSELFMT2,ENAB)
2016:071:19:29:57.852 2623427 ACISPKT AA00000000
2016:071:19:32:57.852 2624129 COMMAND_HW CSELFMT2
2016:071:19:32:57.852 2624129 MP_OBSID 17213
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17213:
Target Name: PSZ1 G108.18-11.53 SI Mode: TE_0046C
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 27 Remaining Exposure time: 1
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2016:071:19:48:36.305 2627792 ACISPKT AA00000000
2016:071:19:48:40.305 2627807 ACISPKT AA00000000
2016:071:19:48:44.305 2627823 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:071:19:49:08.305 2627916 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:071:19:50:11.305 2628162 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:071:19:50:15.305 2628178 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17213
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_0046CB in OCAT.
Stored parameter block is WT006E6034. Requested is WT0046C034
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
>>>ERROR: Not the correct CCDS
Requested=YYYYNNYYNN Actual=YYYYNNNNNN
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,17213,OORMPEN,CSELFMT2,ENAB)
2016:071:19:50:19.305 2628193 ACISPKT RS_0000001
2016:071:19:50:23.305 2628209 ACISPKT RH_0000001
2016:071:20:04:23.305 2631487 AOENDITH AOENDITH
==> DITHER ENABLED
2016:072:04:25:53.305 2748912 ACISPKT AA00000000
==> ACIS integration time of 29.70 ks.
This is 110.00% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:072:04:25:53.305 2748912 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:072:04:27:52.481 2749377 SIMFOCUS -418
2016:072:04:28:53.305 2749614 MP_OBSID 18809
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18809:
Target Name: M87 SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:072:04:29:11.241 2749684 SIMFOCUS -468
2016:072:04:55:49.100 2755919 ACISPKT AA00000000
2016:072:04:55:53.100 2755935 ACISPKT AA00000000
2016:072:04:55:57.100 2755951 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:04:56:21.100 2756044 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:072:04:57:24.100 2756290 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:072:04:57:28.100 2756306 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18809
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18809,OORMPEN,CSELFMT2,ENAB)
2016:072:04:57:32.100 2756321 ACISPKT RS_0000001
2016:072:04:57:36.100 2756337 ACISPKT RH_0000001
2016:072:06:29:34.932 2777874 ACISPKT AA00000000
==> ACIS integration time of 4.91 ks.
This is 98.30% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:072:06:29:34.932 2777874 SIMTRANS -99616 (HRC-S)
2016:072:06:32:34.932 2778576 MP_OBSID 51197
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51197:
No ocat info found for obsid 51197
2016:072:06:35:11.366 2779187 SIMFOCUS -991
2016:072:06:36:38.226 2779526 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2016:072:06:36:38.226 2779526 ACISPKT AA00000000
2016:072:06:36:42.226 2779541 ACISPKT AA00000000
2016:072:06:36:46.226 2779557 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:06:37:10.226 2779651 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:072:06:38:13.226 2779897 ACISPKT WBTX_QUIET
2016:072:06:38:17.226 2779912 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:072:06:38:21.226 2779928 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51197
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_00B26B in OCAT.
Stored parameter block is WT007AE024. Requested is WT00B26014
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51197,OORMPDS,CSELFMT2,ENAB)
2016:072:06:38:25.226 2779943 ACISPKT RS_0000001
2016:072:06:38:29.226 2779959 ACISPKT RH_0000001
2016:072:06:38:52.226 2780049 ACISPKT RBTXINGALL
2016:072:06:46:28.107 2781828 MP_OBSID 51196
==> ObsID change occurs 9.8 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51196:
No ocat info found for obsid 51196
2016:072:08:39:14.013 2808231 MP_OBSID 51195
LATEST OCAT INFO FOR OBSID 51195:
No ocat info found for obsid 51195
2016:072:09:20:18.226 2817848 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2016:072:09:23:18.226 2818550 ACISPKT AA00000000
2016:072:09:23:18.226 2818550 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 072:09:23:18
from CRM file: EE1RADZ0 = 072:09:23:18
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2016:072:09:23:27.226 2818585 ACISPKT WSVIDALLDN
2016:072:09:24:30.226 2818831 ACISPKT RS_0000001
2016:072:14:06:08.474 2884776 MP_OBSID 51194
LATEST OCAT INFO FOR OBSID 51194:
No ocat info found for obsid 51194
2016:072:14:13:05.219 2884828 ORBPOINT EPERIGEE
2016:072:19:19:28.341 2958141 MP_OBSID 51193
LATEST OCAT INFO FOR OBSID 51193:
No ocat info found for obsid 51193
2016:072:19:33:18.226 2961379 ACISPKT AA00000000
2016:072:19:33:18.226 2961379 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2016:072:19:33:22.226 2961395 ACISPKT AA00000000
2016:072:19:33:26.226 2961411 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:19:33:50.226 2961504 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2016:072:19:34:53.226 2961750 ACISPKT WBTX_QUIET
2016:072:19:34:57.226 2961766 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:072:19:35:01.226 2961781 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51193
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_007ACB in OCAT.
Stored parameter block is WT00B26014. Requested is WT007AC024
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51193,OORMPDS,CSELFMT2,ENAB)
2016:072:19:35:05.226 2961797 ACISPKT RS_0000001
2016:072:19:35:09.226 2961813 ACISPKT RH_0000001
2016:072:19:35:32.226 2961902 ACISPKT RBTXINGALL
2016:072:21:22:51.226 2987030 COMMAND_SW OORMPEN
==> Exit leg pad time is 6.57 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 072:19:33:18
from CRM file: XE1RADZ0 = 072:19:33:18
==> CRM Pad Time: 6.573 ks and Backstop Pad Time: 6.57 ks agree.
2016:072:21:22:52.226 2987034 ACISPKT AA00000000
==> ACIS integration time of 5.07 ks.
2016:072:21:22:52.226 2987034 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:072:21:23:52.920 2987271 ACISPKT AA00000000
2016:072:21:23:56.920 2987287 ACISPKT AA00000000
2016:072:21:24:00.920 2987302 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:21:24:24.920 2987396 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:072:21:25:27.920 2987642 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:072:21:25:31.920 2987657 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51193,OORMPEN,CSELFMT2,ENAB)
2016:072:21:25:35.920 2987673 ACISPKT RS_0000001
2016:072:21:25:39.920 2987689 ACISPKT RH_0000001
2016:072:21:25:52.226 2987737 MP_OBSID 17721
==> ObsID change occurs 1.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17721:
Target Name: sigma Orionis SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.5 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time: 0.4
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time: 0.4
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 17721
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:072:21:28:28.660 2988347 SIMFOCUS -418
2016:072:21:29:56.520 2988690 SIMFOCUS -468
2016:072:22:34:03.920 3003704 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:072:22:37:03.920 3004407 MP_OBSID 16747
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 16747:
Target Name: PSR J1709+2313 SI Mode: TE_00C28
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 27.3 Remaining Exposure time: 2.3
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.08 Range: 11.92
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 16 Obj_Flag: NO
2016:072:23:01:58.091 3010237 ACISPKT AA00000000
2016:072:23:02:02.091 3010253 ACISPKT AA00000000
2016:072:23:02:06.091 3010269 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:072:23:02:30.091 3010362 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2016:072:23:03:33.091 3010608 ACISPKT WT00C28014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c28014
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 2980
windowSlotIndex = 65535
2016:072:23:03:37.091 3010624 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 16747
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C28B is WT00C28014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,16747,OORMPEN,CSELFMT2,ENAB)
2016:072:23:03:41.091 3010639 ACISPKT RS_0000001
2016:072:23:03:45.091 3010655 ACISPKT RH_0000001
2016:073:06:55:04.091 3121012 ACISPKT AA00000000
==> ACIS integration time of 27.00 ks.
This is 98.90% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:073:06:58:04.091 3121715 MP_OBSID 18810
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18810:
Target Name: M87 SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:073:07:13:40.809 3125370 ACISPKT AA00000000
2016:073:07:13:44.809 3125386 ACISPKT AA00000000
2016:073:07:13:48.809 3125401 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:073:07:14:12.809 3125495 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:073:07:15:15.809 3125741 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:073:07:15:19.809 3125756 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18810
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18810,OORMPEN,CSELFMT2,ENAB)
2016:073:07:15:23.809 3125772 ACISPKT RS_0000001
2016:073:07:15:27.809 3125788 ACISPKT RH_0000001
2016:073:08:48:51.809 3147657 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:073:08:48:51.809 3147657 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:073:08:50:50.985 3148122 SIMFOCUS -536
2016:073:08:51:51.809 3148359 MP_OBSID 18761
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18761:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 2
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:073:08:51:51.809 3148359 ACISPKT AA00000000
2016:073:08:51:55.809 3148375 ACISPKT AA00000000
2016:073:08:51:59.809 3148391 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:073:08:52:23.809 3148484 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:073:08:53:26.809 3148730 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:073:08:53:30.809 3148746 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18761
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18761,OORMPEN,CSELFMT2,ENAB)
2016:073:08:53:34.809 3148761 ACISPKT RS_0000001
2016:073:08:53:38.809 3148777 ACISPKT RH_0000001
2016:073:21:56:34.601 3153128 ORBPOINT EAPOGEE
2016:073:22:34:08.809 3340894 ACISPKT AA00000000
==> ACIS integration time of 48.00 ks.
This is 96.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:073:22:37:08.809 3341596 MP_OBSID 51192
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51192:
No ocat info found for obsid 51192
2016:073:23:21:59.211 3352096 MP_OBSID 18420
LATEST OCAT INFO FOR OBSID 18420:
Target Name: E0102-72 S3,-120,1,0,0 SI Mode: TE_00B76
Instrument: ACIS-S Grating: NONE Type: CAL
Exposure Time: 20 Remaining Exposure time: 0
Offset: Y: -3.7095 Z: 0 Z-sim: 10.53
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 769 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:073:23:21:59.211 3352096 SIMTRANS 79808 (ACIS-S)
==> THERE IS A Z-SIM OF 10.52 mm FOR THIS OBSERVATION.
2016:073:23:23:52.626 3352538 SIMFOCUS -418
2016:073:23:25:11.386 3352845 SIMFOCUS -468
2016:073:23:43:17.202 3357083 ACISPKT AA00000000
2016:073:23:43:21.202 3357098 ACISPKT AA00000000
2016:073:23:43:25.202 3357114 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:073:23:43:49.202 3357208 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:073:23:44:52.202 3357454 ACISPKT WT00B76014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b76014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 768
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:073:23:44:56.202 3357469 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18420
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B76B is WT00B76014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18420,OORMPEN,CSELFMT2,ENAB)
2016:073:23:45:00.202 3357485 ACISPKT RS_0000001
2016:073:23:45:04.202 3357500 ACISPKT RH_0000001
2016:074:05:28:52.202 3438000 ACISPKT AA00000000
==> ACIS integration time of 20.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:074:05:28:52.202 3438000 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:074:05:30:45.617 3438442 SIMFOCUS -536
2016:074:05:31:52.202 3438702 MP_OBSID 18417
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18417:
Target Name: E0102-72 I3,-120,-0.5,0.5,0 SI Mode: TE_0072A
Instrument: ACIS-I Grating: NONE Type: CAL
Exposure Time: 25 Remaining Exposure time: -1.009121
Offset: Y: -0.6 Z: 0.5 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNNNNN
Subarray Type: CUSTOM Start: 768 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:074:05:31:52.202 3438702 ACISPKT AA00000000
2016:074:05:31:56.202 3438718 ACISPKT AA00000000
2016:074:05:32:00.202 3438734 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:05:32:24.202 3438827 ACISPKT WSPOW00802
==> WSPOW COMMAND LOADS: Feps 1; I3
2016:074:05:33:27.202 3439073 ACISPKT WT0072A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0072a024
fepCcdSelect = 10 3 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 767
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:074:05:33:31.202 3439089 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18417
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0072AB is WT0072A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18417,OORMPEN,CSELFMT2,ENAB)
2016:074:05:33:35.202 3439104 ACISPKT RS_0000001
2016:074:05:33:39.202 3439120 ACISPKT RH_0000001
2016:074:12:24:04.202 3535217 ACISPKT AA00000000
==> ACIS integration time of 24.00 ks.
This is 96.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:074:12:27:04.202 3535920 MP_OBSID 51191
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51191:
No ocat info found for obsid 51191
2016:074:13:09:49.450 3545931 MP_OBSID 18811
LATEST OCAT INFO FOR OBSID 18811:
Target Name: M87 SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:074:13:09:49.450 3545931 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:074:13:11:48.626 3546396 SIMFOCUS -418
2016:074:13:13:07.386 3546703 SIMFOCUS -468
2016:074:13:32:51.647 3551325 ACISPKT AA00000000
2016:074:13:32:55.647 3551340 ACISPKT AA00000000
2016:074:13:32:59.647 3551356 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:13:33:23.647 3551449 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:074:13:34:26.647 3551695 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:074:13:34:30.647 3551711 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18811
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18811,OORMPEN,CSELFMT2,ENAB)
2016:074:13:34:34.647 3551726 ACISPKT RS_0000001
2016:074:13:34:38.647 3551742 ACISPKT RH_0000001
2016:074:15:08:02.647 3573611 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:074:15:08:02.647 3573611 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:074:15:10:01.823 3574076 SIMFOCUS -536
2016:074:15:11:02.647 3574314 MP_OBSID 18794
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18794:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 36 Remaining Exposure time: -0.279088999999999
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:074:15:11:02.647 3574314 ACISPKT AA00000000
2016:074:15:11:06.647 3574329 ACISPKT AA00000000
2016:074:15:11:10.647 3574345 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:15:11:34.647 3574439 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:074:15:12:37.647 3574685 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:074:15:12:41.647 3574700 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18794
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18794,OORMPEN,CSELFMT2,ENAB)
2016:074:15:12:45.647 3574716 ACISPKT RS_0000001
2016:074:15:12:49.647 3574731 ACISPKT RH_0000001
2016:074:23:46:44.675 3695063 ACISPKT AA00000000
==> ACIS integration time of 29.61 ks.
This is 82.24% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:074:23:46:44.675 3695063 SIMTRANS -99616 (HRC-S)
2016:074:23:49:44.675 3695766 MP_OBSID 51190
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51190:
No ocat info found for obsid 51190
2016:074:23:52:44.885 3696469 SIMFOCUS -991
2016:074:23:54:10.385 3696803 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2016:074:23:54:10.385 3696803 ACISPKT AA00000000
2016:074:23:54:14.385 3696818 ACISPKT AA00000000
2016:074:23:54:18.385 3696834 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:074:23:54:42.385 3696927 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2016:074:23:55:45.385 3697173 ACISPKT WBTX_QUIET
2016:074:23:55:49.385 3697189 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:074:23:55:53.385 3697204 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51190
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_007AEB in OCAT.
Stored parameter block is WT007AC024. Requested is WT007AE024
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51190,OORMPDS,CSELFMT2,ENAB)
2016:074:23:55:57.385 3697220 ACISPKT RS_0000001
2016:074:23:56:01.385 3697236 ACISPKT RH_0000001
2016:074:23:56:24.385 3697325 ACISPKT RBTXINGALL
2016:074:23:58:40.385 3697856 MP_OBSID 51189
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51189:
No ocat info found for obsid 51189
2016:075:01:33:37.385 3720088 ACISPKT AA00000000
==> ACIS integration time of 4.46 ks.
2016:075:01:36:37.385 3720791 ACISPKT AA00000000
2016:075:01:36:37.385 3720791 ORBPOINT EEF1000
==> Entry leg pad time is 6.15 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 075:01:36:37
from CRM file: EE1RADZ0 = 075:01:36:37
==> CRM Pad Time: 6.146 ks and Backstop Pad Time: 6.15 ks agree.
2016:075:01:36:46.385 3720826 ACISPKT WSVIDALLDN
2016:075:01:37:49.385 3721072 ACISPKT RS_0000001
2016:075:02:33:14.745 3734049 MP_OBSID 51188
==> ObsID change occurs 56.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51188:
No ocat info found for obsid 51188
2016:075:05:21:51.633 3773529 MP_OBSID 51187
LATEST OCAT INFO FOR OBSID 51187:
No ocat info found for obsid 51187
2016:075:05:40:33.053 3773581 ORBPOINT EPERIGEE
2016:075:08:16:43.132 3814472 MP_OBSID 51186
LATEST OCAT INFO FOR OBSID 51186:
No ocat info found for obsid 51186
2016:075:09:10:49.132 3827139 MP_OBSID 51185
LATEST OCAT INFO FOR OBSID 51185:
No ocat info found for obsid 51185
2016:075:10:04:35.869 3839731 MP_OBSID 51184
LATEST OCAT INFO FOR OBSID 51184:
No ocat info found for obsid 51184
2016:075:10:46:37.385 3849571 ACISPKT AA00000000
2016:075:10:46:37.385 3849571 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TN_000B6
2016:075:10:46:41.385 3849587 ACISPKT AA00000000
2016:075:10:46:45.385 3849602 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:10:47:09.385 3849696 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:075:10:48:12.385 3849942 ACISPKT WBTX_QUIET
2016:075:10:48:16.385 3849958 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:075:10:48:20.385 3849973 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51184
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TN_000B6B in OCAT.
Stored parameter block is WT007AE024. Requested is WT000B7024
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51184,OORMPDS,CSELFMT2,ENAB)
2016:075:10:48:24.385 3849989 ACISPKT RS_0000001
2016:075:10:48:28.385 3850004 ACISPKT RH_0000001
2016:075:10:48:51.385 3850094 ACISPKT RBTXINGALL
2016:075:12:45:11.385 3877333 ACISPKT AA00000000
==> ACIS integration time of 5.61 ks.
2016:075:12:48:10.385 3878032 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.29 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 075:10:46:37
from CRM file: XE1RADZ0 = 075:10:46:37
==> CRM Pad Time: 7.293 ks and Backstop Pad Time: 7.29 ks agree.
2016:075:12:48:11.385 3878036 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:075:12:48:12.385 3878040 ACISPKT AA00000000
2016:075:12:48:16.385 3878055 ACISPKT AA00000000
2016:075:12:48:20.385 3878071 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:12:48:44.385 3878164 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2016:075:12:49:47.385 3878410 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:075:12:49:51.385 3878426 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,51184,OORMPEN,CSELFMT2,ENAB)
2016:075:12:49:55.385 3878442 ACISPKT RS_0000001
2016:075:12:49:59.385 3878457 ACISPKT RH_0000001
2016:075:12:51:11.385 3878738 MP_OBSID 18090
==> ObsID change occurs 2.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18090:
Target Name: 3CR 27 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
---------------------------------------------------------------------------
Parameter block and set up check for 18090
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
2016:075:12:53:47.819 3879349 SIMFOCUS -418
2016:075:12:55:15.679 3879691 SIMFOCUS -468
2016:075:16:30:29.385 3930086 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:075:16:33:29.385 3930789 MP_OBSID 18418
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18418:
Target Name: E0102-72 S3,-120,1,0,0 SI Mode: TE_00AE8
Instrument: ACIS-S Grating: NONE Type: CAL
Exposure Time: 15 Remaining Exposure time: 0
Offset: Y: 0.8 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 360 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:075:17:10:46.587 3939519 ACISPKT AA00000000
2016:075:17:10:50.587 3939535 ACISPKT AA00000000
2016:075:17:10:54.587 3939551 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:17:11:18.587 3939644 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:075:17:12:21.587 3939890 ACISPKT WT00AE8014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00ae8014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 359
subarrayRowCount = 255
primaryExposure = 8
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2016:075:17:12:25.587 3939906 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18418
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00AE8B is WT00AE8014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18418,OORMPEN,CSELFMT2,ENAB)
2016:075:17:12:29.587 3939921 ACISPKT RS_0000001
2016:075:17:12:33.587 3939937 ACISPKT RH_0000001
2016:075:21:32:58.587 4000913 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:075:21:35:58.587 4001615 MP_OBSID 17722
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 17722:
Target Name: sigma Orionis SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.5 Remaining Exposure time: 0
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time: 0.4
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time: 0.4
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:075:21:54:57.395 4006059 ACISPKT AA00000000
2016:075:21:55:01.395 4006075 ACISPKT AA00000000
2016:075:21:55:05.395 4006090 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:075:21:55:29.395 4006184 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:075:21:56:32.395 4006430 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:075:21:56:36.395 4006445 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 17722
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,17722,OORMPEN,CSELFMT2,ENAB)
2016:075:21:56:40.395 4006461 ACISPKT RS_0000001
2016:075:21:56:44.395 4006477 ACISPKT RH_0000001
2016:075:23:05:08.395 4022492 ACISPKT AA00000000
==> ACIS integration time of 3.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:075:23:08:08.395 4023195 MP_OBSID 51183
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51183:
No ocat info found for obsid 51183
2016:075:23:51:59.470 4033462 MP_OBSID 18812
LATEST OCAT INFO FOR OBSID 18812:
Target Name: M87 SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:076:00:27:07.356 4041688 ACISPKT WSVIDALLDN
2016:076:00:27:25.356 4041758 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:076:00:28:28.356 4042004 ACISPKT WT008FD014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fd014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:076:00:28:32.356 4042020 ACISPKT RS_0000001
2016:076:00:28:36.356 4042036 ACISPKT RH_0000001
2016:076:00:28:59.356 4042125 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18812
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FC is WT008FD014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18812,OORMPEN,CSELFMT2,ENAB)
2016:076:01:50:27.356 4061200 ACISPKT AA00000000
==> ACIS integration time of 4.89 ks.
This is 97.76% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:076:01:50:27.356 4061200 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:076:01:52:26.532 4061666 SIMFOCUS -536
2016:076:01:53:27.356 4061903 MP_OBSID 18275
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18275:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 0
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:076:01:53:27.356 4061903 ACISPKT AA00000000
2016:076:01:53:31.356 4061918 ACISPKT AA00000000
2016:076:01:53:35.356 4061934 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:076:01:53:59.356 4062028 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:076:01:55:02.356 4062274 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:076:01:55:06.356 4062289 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18275
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18275,OORMPEN,CSELFMT2,ENAB)
2016:076:01:55:10.356 4062305 ACISPKT RS_0000001
2016:076:01:55:14.356 4062320 ACISPKT RH_0000001
2016:076:13:24:05.336 4066897 ORBPOINT EAPOGEE
2016:076:16:09:04.356 4262242 ACISPKT AA00000000
==> ACIS integration time of 50.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:076:16:12:04.356 4262945 MP_OBSID 51182
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51182:
No ocat info found for obsid 51182
2016:076:16:40:36.459 4269626 COMMAND_HW CSELFMT4
2016:076:16:40:36.459 4269626 MP_OBSID 18619
LATEST OCAT INFO FOR OBSID 18619:
Target Name: SMC X-1 SI Mode: TE_009E8
Instrument: ACIS-S Grating: HETG Type: TOO
Exposure Time: 34 Remaining Exposure time: 2
Offset: Y: 0 Z: -0.3 Z-sim: -6.14
ACIS Exposure Mode: TE Event TM Format: G Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: CUSTOM Start: 1 Rows: 512 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:076:16:40:36.459 4269626 SIMTRANS 73176 (ACIS-S)
==> THERE IS A Z-SIM OF -6.16 mm FOR THIS OBSERVATION.
2016:076:16:41:10.798 4269760 COMMAND_SW 4OHETGIN
2016:076:16:42:38.994 4270104 SIMFOCUS -418
2016:076:16:43:57.754 4270412 SIMFOCUS -468
2016:076:16:44:54.259 4270632 COMMAND_HW CSELFMT2
2016:076:17:11:19.628 4276819 ACISPKT AA00000000
2016:076:17:11:23.628 4276835 ACISPKT AA00000000
2016:076:17:11:27.628 4276850 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:076:17:11:51.628 4276944 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:076:17:12:54.628 4277190 ACISPKT WT009E8024
ACIS PBLOCK LOADS:
parameterBlockId = 0x009e8024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 2 # BEP_TE_MODE_GRADED
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 511
primaryExposure = 17
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:076:17:12:58.628 4277205 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18619
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_009E8B is WT009E8024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18619,OORMPEN,CSELFMT2,ENAB)
2016:076:17:13:02.628 4277221 ACISPKT RS_0000001
2016:076:17:13:06.628 4277237 ACISPKT RH_0000001
2016:077:02:23:40.628 4406150 ACISPKT AA00000000
==> ACIS integration time of 32.00 ks.
This is 94.12% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:077:02:26:40.628 4406852 MP_OBSID 51181
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51181:
No ocat info found for obsid 51181
2016:077:03:12:45.019 4417640 COMMAND_HW CSELFMT4
2016:077:03:12:45.019 4417640 MP_OBSID 18813
LATEST OCAT INFO FOR OBSID 18813:
Target Name: M87 SI Mode: TE_008FC
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:077:03:12:45.019 4417640 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:077:03:13:19.358 4417774 COMMAND_SW 4OHETGRE
2016:077:03:17:02.819 4418646 COMMAND_HW CSELFMT2
2016:077:03:31:44.937 4422089 ACISPKT AA00000000
2016:077:03:31:48.937 4422104 ACISPKT AA00000000
2016:077:03:31:52.937 4422120 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:077:03:32:16.937 4422213 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2016:077:03:33:19.937 4422459 ACISPKT WT008FC014
ACIS PBLOCK LOADS:
parameterBlockId = 0x008fc014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:077:03:33:23.937 4422475 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18813
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008FCB is WT008FC014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,18813,OORMPEN,CSELFMT2,ENAB)
2016:077:03:33:27.937 4422490 ACISPKT RS_0000001
2016:077:03:33:31.937 4422506 ACISPKT RH_0000001
2016:077:05:06:55.937 4444375 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:077:05:06:55.937 4444375 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:077:05:08:55.113 4444840 SIMFOCUS -536
2016:077:05:09:55.937 4445078 MP_OBSID 18795
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18795:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 57 Remaining Exposure time: -0.268757000000001
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:077:05:09:55.937 4445078 ACISPKT AA00000000
2016:077:05:09:59.937 4445093 ACISPKT AA00000000
2016:077:05:10:03.937 4445109 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:077:05:10:27.937 4445203 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:077:05:11:30.937 4445449 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:077:05:11:34.937 4445464 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18795
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18795,OORMPEN,CSELFMT2,ENAB)
2016:077:05:11:38.937 4445480 ACISPKT RS_0000001
2016:077:05:11:42.937 4445495 ACISPKT RH_0000001
2016:077:13:20:00.149 4559826 ACISPKT AA00000000
==> ACIS integration time of 28.07 ks.
This is 49.24% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:077:13:20:00.149 4559826 SIMTRANS -99616 (HRC-S)
2016:077:13:23:00.149 4560528 MP_OBSID 51180
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51180:
No ocat info found for obsid 51180
2016:077:13:26:00.359 4561232 SIMFOCUS -991
2016:077:13:27:25.859 4561565 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2016:077:13:27:25.859 4561565 ACISPKT AA00000000
2016:077:13:27:29.859 4561581 ACISPKT AA00000000
2016:077:13:27:33.859 4561597 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:077:13:27:57.859 4561690 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2016:077:13:29:00.859 4561936 ACISPKT WBTX_QUIET
2016:077:13:29:04.859 4561952 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:077:13:29:08.859 4561967 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51180
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_007ACB in OCAT.
Stored parameter block is WT00B26014. Requested is WT007AC024
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51180,OORMPDS,CSELFMT2,ENAB)
2016:077:13:29:12.859 4561983 ACISPKT RS_0000001
2016:077:13:29:16.859 4561998 ACISPKT RH_0000001
2016:077:13:29:39.859 4562088 ACISPKT RBTXINGALL
2016:077:13:31:55.859 4562619 MP_OBSID 51179
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51179:
No ocat info found for obsid 51179
2016:077:14:32:21.921 4576769 MP_OBSID 51178
LATEST OCAT INFO FOR OBSID 51178:
No ocat info found for obsid 51178
2016:077:15:34:00.653 4591204 MP_OBSID 51177
LATEST OCAT INFO FOR OBSID 51177:
No ocat info found for obsid 51177
2016:077:16:01:29.044 4597636 MP_OBSID 51176
LATEST OCAT INFO FOR OBSID 51176:
No ocat info found for obsid 51176
2016:077:16:11:05.859 4599887 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2016:077:16:14:05.859 4600590 ACISPKT AA00000000
2016:077:16:14:05.859 4600590 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 077:16:14:05
from CRM file: EE1RADZ0 = 077:16:14:05
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2016:077:16:14:14.859 4600625 ACISPKT WSVIDALLDN
2016:077:16:15:17.859 4600871 ACISPKT RS_0000001
2016:077:20:11:42.492 4656225 MP_OBSID 51175
LATEST OCAT INFO FOR OBSID 51175:
No ocat info found for obsid 51175
2016:077:21:07:55.763 4666238 ORBPOINT EPERIGEE
2016:078:02:34:42.429 4745903 MP_OBSID 51174
LATEST OCAT INFO FOR OBSID 51174:
No ocat info found for obsid 51174
2016:078:02:58:05.859 4751380 MP_OBSID 51173
LATEST OCAT INFO FOR OBSID 51173:
No ocat info found for obsid 51173
2016:078:02:58:05.859 4751380 ACISPKT AA00000000
2016:078:02:58:05.859 4751380 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2016:078:02:58:09.859 4751396 ACISPKT AA00000000
2016:078:02:58:13.859 4751411 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:02:58:37.859 4751505 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2016:078:02:59:40.859 4751751 ACISPKT WBTX_QUIET
2016:078:02:59:44.859 4751766 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:078:02:59:48.859 4751782 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51173
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_007AEB in OCAT.
Stored parameter block is WT007AC024. Requested is WT007AE024
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,51173,OORMPDS,CSELFMT2,ENAB)
2016:078:02:59:52.859 4751797 ACISPKT RS_0000001
2016:078:02:59:56.859 4751813 ACISPKT RH_0000001
2016:078:03:00:19.859 4751903 ACISPKT RBTXINGALL
2016:078:03:12:10.826 4754677 MP_OBSID 51172
==> ObsID change occurs 14.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51172:
No ocat info found for obsid 51172
2016:078:04:07:05.224 4767534 COMMAND_HW CSELFMT4
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2016:078:04:07:39.563 4767668 COMMAND_SW 4OHETGIN
2016:078:04:11:23.024 4768540 COMMAND_HW CSELFMT2
2016:078:04:18:25.859 4770190 ACISPKT AA00000000
==> ACIS integration time of 0.65 ks.
2016:078:04:21:24.859 4770888 COMMAND_SW OORMPEN
==> Exit leg pad time is 5.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 078:02:58:05
from CRM file: XE1RADZ0 = 078:02:58:05
==> CRM Pad Time: 5 ks and Backstop Pad Time: 5.00 ks agree.
2016:078:04:21:25.859 4770892 MP_OBSID 18144
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18144:
Target Name: Mkn 876 SI Mode: TE_0088E
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:078:04:21:25.859 4770892 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:078:04:21:26.859 4770896 ACISPKT AA00000000
2016:078:04:21:30.859 4770912 ACISPKT AA00000000
2016:078:04:21:34.859 4770927 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:04:21:58.859 4771021 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:078:04:23:01.859 4771267 ACISPKT WT0088E024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0088e024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:078:04:23:05.859 4771282 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18144
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0088EB is WT0088E024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18144,OORMPEN,CSELFMT2,ENAB)
2016:078:04:23:09.859 4771298 ACISPKT RS_0000001
2016:078:04:23:13.859 4771314 ACISPKT RH_0000001
2016:078:04:27:02.293 4772205 SIMFOCUS -418
2016:078:04:28:30.153 4772548 SIMFOCUS -468
2016:078:11:26:26.859 4870408 ACISPKT AA00000000
==> ACIS integration time of 24.00 ks.
This is 96.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:078:11:26:26.859 4870408 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:078:11:28:26.035 4870873 SIMFOCUS -536
2016:078:11:29:26.859 4871111 COMMAND_HW CSELFMT4
2016:078:11:29:26.859 4871111 MP_OBSID 18796
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18796:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:078:11:30:01.198 4871245 COMMAND_SW 4OHETGRE
2016:078:11:33:44.659 4872117 COMMAND_HW CSELFMT2
2016:078:11:34:17.459 4872245 ACISPKT AA00000000
2016:078:11:34:21.459 4872260 ACISPKT AA00000000
2016:078:11:34:25.459 4872276 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:11:34:49.459 4872370 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:078:11:35:52.459 4872615 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:078:11:35:56.459 4872631 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18796
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18796,OORMPEN,CSELFMT2,ENAB)
2016:078:11:36:00.459 4872647 ACISPKT RS_0000001
2016:078:11:36:04.459 4872662 ACISPKT RH_0000001
2016:078:23:03:14.459 5033560 ACISPKT AA00000000
==> ACIS integration time of 40.00 ks.
This is 80.00% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:078:23:03:14.459 5033560 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:078:23:05:13.635 5034025 SIMFOCUS -418
2016:078:23:06:14.459 5034262 COMMAND_HW CSELFMT4
2016:078:23:06:14.459 5034262 MP_OBSID 18814
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18814:
Target Name: Mkn 876 SI Mode: TE_0088E
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:078:23:06:32.395 5034332 SIMFOCUS -468
2016:078:23:06:48.798 5034396 COMMAND_SW 4OHETGIN
2016:078:23:10:32.259 5035268 COMMAND_HW CSELFMT2
2016:078:23:11:05.059 5035396 ACISPKT AA00000000
2016:078:23:11:09.059 5035412 ACISPKT AA00000000
2016:078:23:11:13.059 5035428 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:078:23:11:37.059 5035521 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:078:23:12:40.059 5035767 ACISPKT WT0088E024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0088e024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:078:23:12:44.059 5035783 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18814
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0088EB is WT0088E024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18814,OORMPEN,CSELFMT2,ENAB)
2016:078:23:12:48.059 5035798 ACISPKT RS_0000001
2016:078:23:12:52.059 5035814 ACISPKT RH_0000001
2016:079:04:51:58.791 5040584 ORBPOINT EAPOGEE
2016:079:06:16:05.059 5134908 ACISPKT AA00000000
==> ACIS integration time of 24.00 ks.
This is 96.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:079:06:16:05.059 5134908 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:079:06:18:04.235 5135374 SIMFOCUS -536
2016:079:06:19:05.059 5135611 COMMAND_HW CSELFMT4
2016:079:06:19:05.059 5135611 MP_OBSID 18797
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18797:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 48 Remaining Exposure time: 48
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:079:06:19:39.398 5135745 COMMAND_SW 4OHETGRE
2016:079:06:23:22.859 5136617 COMMAND_HW CSELFMT2
2016:079:06:23:55.659 5136745 ACISPKT AA00000000
2016:079:06:23:59.659 5136761 ACISPKT AA00000000
2016:079:06:24:03.659 5136776 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:079:06:24:27.659 5136870 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:079:06:25:30.659 5137116 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:079:06:25:34.659 5137131 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18797
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18797,OORMPEN,CSELFMT2,ENAB)
2016:079:06:25:38.659 5137147 ACISPKT RS_0000001
2016:079:06:25:42.659 5137163 ACISPKT RH_0000001
2016:079:22:02:52.659 5356597 ACISPKT AA00000000
==> ACIS integration time of 55.00 ks.
This is 114.58% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:079:22:02:52.659 5356597 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:079:22:04:51.835 5357062 SIMFOCUS -418
2016:079:22:05:52.659 5357299 COMMAND_HW CSELFMT4
2016:079:22:05:52.659 5357299 MP_OBSID 18145
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18145:
Target Name: Mkn 876 SI Mode: TE_008D0
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:079:22:06:10.595 5357369 SIMFOCUS -468
2016:079:22:06:26.998 5357433 COMMAND_SW 4OHETGIN
2016:079:22:10:10.459 5358305 COMMAND_HW CSELFMT2
2016:079:22:10:43.259 5358433 ACISPKT AA00000000
2016:079:22:10:47.259 5358449 ACISPKT AA00000000
2016:079:22:10:51.259 5358464 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:079:22:11:15.259 5358558 ACISPKT WSPOW3E03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S1 S2 S3 S4 S5
2016:079:22:12:18.259 5358804 ACISPKT WT008D0024
ACIS PBLOCK LOADS:
parameterBlockId = 0x008d0024
fepCcdSelect = 10 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:079:22:12:22.259 5358819 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18145
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008D0B is WT008D0024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18145,OORMPEN,CSELFMT2,ENAB)
2016:079:22:12:26.259 5358835 ACISPKT RS_0000001
2016:079:22:12:30.259 5358851 ACISPKT RH_0000001
2016:080:04:59:42.442 5454196 ACISPKT AA00000000
==> ACIS integration time of 23.08 ks.
This is 92.33% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:080:04:59:42.442 5454196 SIMTRANS -99616 (HRC-S)
2016:080:05:02:42.442 5454898 MP_OBSID 51171
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51171:
No ocat info found for obsid 51171
2016:080:05:05:18.876 5455509 SIMFOCUS -991
2016:080:05:06:45.736 5455848 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2016:080:05:06:45.736 5455848 ACISPKT AA00000000
2016:080:05:06:49.736 5455863 ACISPKT AA00000000
2016:080:05:06:53.736 5455879 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:080:05:07:17.736 5455973 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:080:05:08:20.736 5456218 ACISPKT WBTX_QUIET
2016:080:05:08:24.736 5456234 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:080:05:08:28.736 5456250 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51171
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_00B26B in OCAT.
Stored parameter block is WT007AE024. Requested is WT00B26014
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,51171,OORMPDS,CSELFMT2,ENAB)
2016:080:05:08:32.736 5456265 ACISPKT RS_0000001
2016:080:05:08:36.736 5456281 ACISPKT RH_0000001
2016:080:05:08:59.736 5456371 ACISPKT RBTXINGALL
2016:080:05:11:15.736 5456901 MP_OBSID 51170
==> ObsID change occurs 4.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51170:
No ocat info found for obsid 51170
2016:080:07:23:13.304 5487799 MP_OBSID 51169
LATEST OCAT INFO FOR OBSID 51169:
No ocat info found for obsid 51169
2016:080:07:50:25.736 5494170 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
2016:080:07:53:25.736 5494872 ACISPKT AA00000000
2016:080:07:53:25.736 5494872 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 080:07:53:25
from CRM file: EE1RADZ0 = 080:07:53:25
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2016:080:07:53:34.736 5494907 ACISPKT WSVIDALLDN
2016:080:07:54:37.736 5495153 ACISPKT RS_0000001
2016:080:08:46:53.258 5507389 MP_OBSID 51168
==> ObsID change occurs 53.5 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51168:
No ocat info found for obsid 51168
2016:080:11:54:22.779 5551290 MP_OBSID 51167
LATEST OCAT INFO FOR OBSID 51167:
No ocat info found for obsid 51167
2016:080:12:35:28.980 5559849 ORBPOINT EPERIGEE
2016:080:12:43:25.089 5562772 MP_OBSID 51166
LATEST OCAT INFO FOR OBSID 51166:
No ocat info found for obsid 51166
2016:080:17:00:43.630 5623020 MP_OBSID 51165
LATEST OCAT INFO FOR OBSID 51165:
No ocat info found for obsid 51165
2016:080:17:45:25.736 5633487 ACISPKT AA00000000
2016:080:17:45:25.736 5633487 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
2016:080:17:45:29.736 5633502 ACISPKT AA00000000
2016:080:17:45:33.736 5633518 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:080:17:45:57.736 5633612 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2016:080:17:47:00.736 5633857 ACISPKT WBTX_QUIET
2016:080:17:47:04.736 5633873 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2016:080:17:47:08.736 5633889 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 51165
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_007ACB in OCAT.
Stored parameter block is WT00B26014. Requested is WT007AC024
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,51165,OORMPDS,CSELFMT2,ENAB)
2016:080:17:47:12.736 5633904 ACISPKT RS_0000001
2016:080:17:47:16.736 5633920 ACISPKT RH_0000001
2016:080:17:47:39.736 5634010 ACISPKT RBTXINGALL
2016:080:18:32:25.583 5644491 MP_OBSID 51164
==> ObsID change occurs 46.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 51164:
No ocat info found for obsid 51164
2016:080:19:18:27.965 5655271 COMMAND_HW CSELFMT4
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2016:080:19:19:02.304 5655405 COMMAND_SW 4OHETGRE
2016:080:19:22:45.765 5656277 COMMAND_HW CSELFMT2
2016:080:19:53:59.736 5663590 ACISPKT AA00000000
==> ACIS integration time of 2.10 ks.
2016:080:19:56:58.736 5664289 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.89 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 080:17:45:25
from CRM file: XE1RADZ0 = 080:17:45:25
==> CRM Pad Time: 7.893 ks and Backstop Pad Time: 7.89 ks agree.
2016:080:19:56:59.736 5664293 MP_OBSID 18798
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18798:
Target Name: Coma cluster SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: -0.3 Z: -0.3 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:080:19:56:59.736 5664293 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:080:19:57:00.736 5664296 ACISPKT AA00000000
2016:080:19:57:04.736 5664312 ACISPKT AA00000000
2016:080:19:57:08.736 5664328 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:080:19:57:32.736 5664421 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2016:080:19:58:35.736 5664667 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:080:19:58:39.736 5664683 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18798
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,18798,OORMPEN,CSELFMT2,ENAB)
2016:080:19:58:43.736 5664698 ACISPKT RS_0000001
2016:080:19:58:47.736 5664714 ACISPKT RH_0000001
2016:080:20:02:59.946 5665698 SIMFOCUS -486
2016:080:20:04:26.446 5666036 SIMFOCUS -536
2016:080:23:55:57.736 5720246 ACISPKT AA00000000
==> ACIS integration time of 13.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2016:080:23:55:57.736 5720246 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2016:080:23:57:56.912 5720711 SIMFOCUS -418
2016:080:23:58:57.736 5720948 COMMAND_HW CSELFMT4
2016:080:23:58:57.736 5720948 MP_OBSID 18799
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 18799:
Target Name: Mkn 876 SI Mode: TE_0088E
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Cycle: 17 Obj_Flag: NO
2016:080:23:59:15.672 5721018 SIMFOCUS -468
2016:080:23:59:32.075 5721082 COMMAND_SW 4OHETGIN
2016:081:00:03:15.536 5721954 COMMAND_HW CSELFMT2
2016:081:00:03:48.336 5722082 ACISPKT AA00000000
2016:081:00:03:52.336 5722098 ACISPKT AA00000000
2016:081:00:03:56.336 5722113 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2016:081:00:04:20.336 5722207 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2016:081:00:05:23.336 5722453 ACISPKT WT0088E024
ACIS PBLOCK LOADS:
parameterBlockId = 0x0088e024
fepCcdSelect = 4 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2016:081:00:05:27.336 5722469 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 18799
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0088EB is WT0088E024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,18799,OORMPEN,CSELFMT2,ENAB)
2016:081:00:05:31.336 5722484 ACISPKT RS_0000001
2016:081:00:05:35.336 5722500 ACISPKT RH_0000001
2016:081:07:25:28.336 5825497 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 0 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
59 5 37 33 33 102
**NOTE: There are 4 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 5 4
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. The parameter block stored does not match the SI_mode.
o. There is a change from FMT2 before an ACIS stop science.
o. The CCDs selection was incorrect for obsid(s)
- 17213
o. The parameter block was incorrect for obsid(s)
- 17213
- 51197
- 51193
- 51190
- 51184
- 51180
- 51173
- 51171
- 51165
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED