-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2019/SEP0619/oflsb/CR249_2305.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2019/SEP0619/oflsb/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-OUT,LETG-OUT,21713,OORMPDS,CSELFMT2,ENAB)
2019:249:23:27:00.000 10416750 ACISPKT AA00000000
2019:249:23:27:03.000 10416762 ACISPKT AA00000000
2019:249:23:30:00.000 10417453 MP_OBSID 47911
==> ObsID change occurs 3.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 47911:
No ocat info found for obsid 47911
2019:249:23:33:00.000 10418155 ACISPKT AA00000000
2019:249:23:33:04.000 10418171 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:249:23:34:07.000 10418417 ACISPKT RS_0000001
2019:250:00:00:13.996 10424532 AOENDITH AOENDITH
==> DITHER ENABLED
2019:250:00:07:04.996 10426136 MP_OBSID 47910
==> ObsID change occurs 34.1 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47910:
No ocat info found for obsid 47910
2019:250:00:07:04.996 10426136 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-I WHILE RADMON IS DISABLED!
2019:250:00:13:05.396 10427542 SIMFOCUS -486
2019:250:00:14:32.796 10427883 SIMFOCUS -536
2019:250:00:33:00.000 10432204 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2019:250:00:34:03.000 10432450 ACISPKT RS_0000001
2019:250:00:57:28.663 10437935 MP_OBSID 21715
LATEST OCAT INFO FOR OBSID 21715:
Target Name: PSZ1 G135.24+65.43 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: -3 Z: -0.25 Z-sim: -7.75
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.36 Range: 13
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2019:250:00:57:28.663 10437935 SIMTRANS 89824 (ACIS-I)
==> THERE IS A Z-SIM OF -7.75 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-I WHILE RADMON IS DISABLED!
2019:250:01:02:46.690 10439177 ACISPKT AA00000000
2019:250:01:02:50.690 10439192 ACISPKT AA00000000
2019:250:01:02:54.690 10439208 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:01:03:18.690 10439301 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2019:250:01:04:21.690 10439547 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2019:250:01:04:25.690 10439563 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 21715
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_006E6 in OCAT.
Stored parameter block is WT006E6034. Requested is WT006E7034
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,21715,OORMPDS,CSELFMT2,ENAB)
2019:250:01:04:29.690 10439579 ACISPKT RS_0000001
2019:250:01:04:33.690 10439594 ACISPKT RH_0000001
2019:250:03:54:25.690 10479368 ACISPKT AA00000000
==> ACIS integration time of 8.96 ks.
This is 89.62% of the requested time.
==>ERROR: Scheduled time is less than 90%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2019:250:03:54:25.690 10479368 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-S WHILE RADMON IS DISABLED!
2019:250:03:56:21.090 10479818 SIMFOCUS -418
2019:250:03:57:25.690 10480070 MP_OBSID 22496
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22496:
Target Name: J151725.9-000805.4 SI Mode: TE_004A6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 17 Remaining Exposure time: 17
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 21 Obj_Flag: NO
2019:250:03:57:25.690 10480070 ACISPKT AA00000000
2019:250:03:57:29.690 10480086 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:03:57:40.490 10480128 SIMFOCUS -468
2019:250:03:58:32.690 10480332 ACISPKT RS_0000001
2019:250:04:02:57.835 10481366 ACISPKT AA00000000
2019:250:04:03:01.835 10481382 ACISPKT AA00000000
2019:250:04:03:05.835 10481398 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:04:03:29.835 10481491 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2019:250:04:04:32.835 10481737 ACISPKT WT004A6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a6024
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2019:250:04:04:36.835 10481753 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 22496
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A6B is WT004A6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,22496,OORMPDS,CSELFMT2,ENAB)
2019:250:04:04:40.835 10481768 ACISPKT RS_0000001
2019:250:04:04:44.835 10481784 ACISPKT RH_0000001
2019:250:09:10:34.835 10553394 ACISPKT AA00000000
==> ACIS integration time of 17.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2019:250:09:10:34.835 10553394 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-I WHILE RADMON IS DISABLED!
2019:250:09:12:34.235 10553860 SIMFOCUS -536
2019:250:09:13:34.835 10554096 MP_OBSID 22741
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22741:
Target Name: Abell 2345 SI Mode: TE_0050E
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 49 Remaining Exposure time: 49
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2019:250:09:13:34.835 10554096 ACISPKT AA00000000
2019:250:09:13:38.835 10554112 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:09:14:41.835 10554358 ACISPKT RS_0000001
2019:250:09:24:23.816 10556629 ACISPKT AA00000000
2019:250:09:24:27.816 10556644 ACISPKT AA00000000
2019:250:09:24:31.816 10556660 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:09:24:55.816 10556754 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2019:250:09:25:58.816 10557000 ACISPKT WT0050E034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0050e034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2019:250:09:26:02.816 10557015 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 22741
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0050EB is WT0050E034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,22741,OORMPDS,CSELFMT2,ENAB)
2019:250:09:26:06.816 10557031 ACISPKT RS_0000001
2019:250:09:26:10.816 10557046 ACISPKT RH_0000001
2019:250:11:15:01.285 REAL-TIME COMM BEGINS 2019:250:07:15:01.285 EDT
2019:250:12:45:01.285 REAL-TIME COMM ENDS 2019:250:08:45:01.285 EDT
==> COMM DURATION: 90.00 mins.
2019:250:16:50:01.285 REAL-TIME COMM BEGINS 2019:250:12:50:01.285 EDT
2019:250:18:20:01.285 REAL-TIME COMM ENDS 2019:250:14:20:01.285 EDT
==> COMM DURATION: 90.00 mins.
2019:250:23:35:01.542 REAL-TIME COMM BEGINS 2019:250:19:35:01.542 EDT
2019:250:23:43:20.042 10757746 ACISPKT AA00000000
==> ACIS integration time of 50.20 ks.
This is 102.45% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2019:250:23:43:20.042 10757746 SIMTRANS -99616 (HRC-S)
2019:250:23:46:20.042 10758448 ACISPKT AA00000000
2019:250:23:46:20.042 10758448 MP_OBSID 47909
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 47909:
No ocat info found for obsid 47909
2019:250:23:46:24.042 10758464 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:23:47:27.042 10758710 ACISPKT RS_0000001
2019:250:23:49:20.442 10759152 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00C62
2019:250:23:49:20.442 10759152 ACISPKT AA00000000
2019:250:23:49:24.442 10759168 ACISPKT AA00000000
2019:250:23:49:28.442 10759183 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:250:23:49:52.442 10759277 ACISPKT WSPOW08E1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I1 I2 I3 S3
2019:250:23:50:55.442 10759523 ACISPKT WBTX_QUIET
2019:250:23:50:59.442 10759539 ACISPKT WT00C62014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c62014
fepCcdSelect = 10 7 3 2 1 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2019:250:23:51:03.442 10759554 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 47909
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C62B is WT00C62014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,47909,OORMPDS,CSELFMT2,ENAB)
2019:250:23:51:07.442 10759570 ACISPKT RS_0000001
2019:250:23:51:11.442 10759585 ACISPKT RH_0000001
2019:250:23:51:34.442 10759675 ACISPKT RBTXINGALL
2019:251:01:31:58.442 10783183 ACISPKT AA00000000
==> ACIS integration time of 4.75 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2019:251:01:34:58.342 10783183 ORBPOINT EEF1000
==> Entry leg pad time is 6.34 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 251:01:34:58
from CRM file: EE1RADZ0 = 251:01:34:58
==> CRM Pad Time: 6.338 ks and Backstop Pad Time: 6.34 ks agree.
2019:251:01:34:58.442 10783886 ACISPKT AA00000000
2019:251:01:35:07.442 10783921 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:251:01:36:10.442 10784167 ACISPKT RS_0000001
2019:251:02:34:58.442 10797935 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2019:251:02:36:01.442 10798180 ACISPKT RS_0000001
2019:251:04:10:45.223 10820361 MP_OBSID 47908
LATEST OCAT INFO FOR OBSID 47908:
No ocat info found for obsid 47908
2019:251:04:15:01.542 REAL-TIME COMM ENDS 2019:251:00:15:01.542 EDT
==> COMM DURATION: 280.00 mins.
2019:251:04:51:26.455 10829804 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
>>>ERROR: Time delta between the last WSVIDALLDN and the 2nd last AA00000000 is greater than 10.0 mins!
2019:251:04:54:04.884 10830506 MP_OBSID 47907
LATEST OCAT INFO FOR OBSID 47907:
No ocat info found for obsid 47907
2019:251:06:00:00.000 10845941 COMMAND_HW CSELFMT2
2019:251:06:20:46.791 10850806 MP_OBSID 47906
LATEST OCAT INFO FOR OBSID 47906:
No ocat info found for obsid 47906
2019:251:10:12:20.806 10905027 MP_OBSID 47905
LATEST OCAT INFO FOR OBSID 47905:
No ocat info found for obsid 47905
2019:251:10:44:58.342 10912666 ACISPKT AA00000000
2019:251:10:44:58.342 10912666 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2019:251:10:45:02.342 10912682 ACISPKT AA00000000
2019:251:10:45:06.342 10912697 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:251:10:45:30.342 10912791 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2019:251:10:46:33.342 10913037 ACISPKT WBTX_QUIET
2019:251:10:46:37.342 10913052 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2019:251:10:46:41.342 10913068 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 47905
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,47905,OORMPDS,CSELFMT2,ENAB)
2019:251:10:46:45.342 10913083 ACISPKT RS_0000001
2019:251:10:46:49.342 10913099 ACISPKT RH_0000001
2019:251:10:47:12.342 10913189 ACISPKT RBTXINGALL
2019:251:11:15:01.285 REAL-TIME COMM BEGINS 2019:251:07:15:01.285 EDT
2019:251:12:45:01.285 REAL-TIME COMM ENDS 2019:251:08:45:01.285 EDT
==> COMM DURATION: 90.00 mins.
2019:251:13:28:38.342 10950988 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2019:251:13:31:37.342 10951686 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 251:10:44:58
from CRM file: XE1RADZ0 = 251:10:44:58
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2019:251:13:31:38.342 10951690 SIMTRANS 91256 (ACIS-I)
==> THERE IS A Z-SIM OF -4.14 mm FOR THIS OBSERVATION.
2019:251:13:31:39.342 10951694 MP_OBSID 21571
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 21571:
Target Name: eMACSJ2315.3-2128 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 33 Remaining Exposure time: 33
Offset: Y: -1.4 Z: 0 Z-sim: -4.15
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2019:251:13:31:39.342 10951694 ACISPKT AA00000000
2019:251:13:31:43.342 10951710 ACISPKT AA00000000
2019:251:13:31:47.342 10951725 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:251:13:32:11.342 10951819 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2019:251:13:33:14.342 10952065 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2019:251:13:33:18.342 10952081 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 21571
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,21571,OORMPEN,CSELFMT2,ENAB)
2019:251:13:33:22.342 10952096 ACISPKT RS_0000001
2019:251:13:33:26.342 10952112 ACISPKT RH_0000001
2019:251:22:00:01.285 REAL-TIME COMM BEGINS 2019:251:18:00:01.285 EDT
2019:251:22:40:36.342 11080229 ACISPKT AA00000000
==> ACIS integration time of 31.60 ks.
This is 95.76% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2019:251:22:40:36.342 11080229 SIMTRANS -50504 (HRC-I)
2019:251:22:43:36.342 11080931 COMMAND_HW CSELFMT1
2019:251:22:43:36.342 11080931 MP_OBSID 22151
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22151:
No ACIS info found for obsid 22151.
This is an HRC-I observation.
2019:251:22:43:36.342 11080931 ACISPKT AA00000000
2019:251:22:43:40.342 11080947 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:251:22:44:43.342 11081193 ACISPKT RS_0000001
2019:251:22:45:26.742 11081362 SIMFOCUS -716
2019:251:23:10:16.840 11087177 ACISPKT WSVIDALLDN
2019:251:23:10:34.840 11087247 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2019:251:23:11:37.840 11087493 ACISPKT RS_0000001
2019:251:23:11:41.840 11087509 ACISPKT RH_0000001
2019:251:23:12:04.840 11087599 ACISPKT WT00452024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00452024
fepCcdSelect = 10 0 1 2 3 7
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
2019:251:23:12:08.840 11087614 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,22151,OORMPEN,CSELFMT1,ENAB)
2019:251:23:13:28.840 11087926 AOENDITH AOENDITH
==> DITHER ENABLED
2019:251:23:30:01.285 REAL-TIME COMM ENDS 2019:251:19:30:01.285 EDT
==> COMM DURATION: 90.00 mins.
2019:252:02:35:01.285 REAL-TIME COMM BEGINS 2019:251:22:35:01.285 EDT
2019:252:04:05:01.285 REAL-TIME COMM ENDS 2019:252:00:05:01.285 EDT
==> COMM DURATION: 90.00 mins.
2019:252:06:13:38.840 11186307 ACISPKT AA00000000
==> ACIS integration time of 24.63 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2019:252:06:16:38.840 11187009 MP_OBSID 47904
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47904:
No ocat info found for obsid 47904
2019:252:06:16:38.840 11187009 ACISPKT AA00000000
2019:252:06:16:42.840 11187025 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:252:06:17:45.840 11187271 ACISPKT RS_0000001
2019:252:06:35:59.125 11191537 COMMAND_HW CSELFMT2
2019:252:06:35:59.125 11191537 MP_OBSID 21498
==> ObsID change occurs 19.3 minutes after stop science.
LATEST OCAT INFO FOR OBSID 21498:
Target Name: MRC2035-203 SI Mode: TE_00A0C
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2019:252:06:35:59.125 11191537 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2019:252:06:40:28.525 11192589 SIMFOCUS -418
2019:252:06:41:50.925 11192910 SIMFOCUS -468
2019:252:06:50:09.825 11194857 ACISPKT AA00000000
2019:252:06:50:13.825 11194873 ACISPKT AA00000000
2019:252:06:50:17.825 11194888 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2019:252:06:50:41.825 11194982 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2019:252:06:51:44.825 11195228 ACISPKT WT00A0C024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a0c024
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2019:252:06:51:48.825 11195243 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 21498
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A0CB is WT00A0C024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,21498,OORMPEN,CSELFMT2,ENAB)
2019:252:06:51:52.825 11195259 ACISPKT RS_0000001
2019:252:06:51:56.825 11195275 ACISPKT RH_0000001
2019:252:06:57:07.825 11196488 AOENDITH AOENDITH
==> DITHER ENABLED
2019:252:09:50:17.825 11237035 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 6 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
14 3 17 8 8 31
**NOTE: There are 1 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 0 0
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. The OBSID change to 47911 that occurs less than 3 mins after a stop science.
o. A SIM Translation to ACIS occurs while RADMON is DISABLED.
o. The parameter block stored does not match the SI_mode.
o. There are ACIS observations for which the RadMon has not been enabled.
o. The OBSID change to 47909 that occurs less than 3 mins after a stop science.
o. Time difference between a WSVIDALLDN command and the 2nd AA00000000 that precedes it is greater than 10 mins.
o. The parameter block was incorrect for obsid(s)
- 21715
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED