-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2020/MAY2820/oflsa/CR149_0101.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2020/MAY2820/oflsa/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-IN,LETG-OUT,47186,OORMPDS,CSELFMT2,ENAB)
2020:149:00:57:00.000 793248 ACISPKT AA00000000
ACISPKT AND/OR POWER COMMAND ERROR:
2020:149:00:57:03.00 ACISPKT Rule #0 - ERROR Less than 4 second delay between consecutive ACISPKT commands
2020:149:00:57:03.000 793260 ACISPKT AA00000000
2020:149:01:00:00.000 793951 MP_OBSID 47185
==> ObsID change occurs 3.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 47185:
No ocat info found for obsid 47185
2020:149:01:03:00.000 794653 ACISPKT AA00000000
2020:149:01:03:04.000 794669 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:01:04:07.000 794915 ACISPKT RS_0000001
2020:149:02:03:00.000 808702 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2020:149:02:04:03.000 808948 ACISPKT RS_0000001
2020:149:02:05:21.325 809253 COMMAND_HW CSELFMT4
2020:149:02:05:21.325 809253 MP_OBSID 22456
==> ObsID change occurs 62.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22456:
Target Name: short GRB 200522A SI Mode: TE_00914
Instrument: ACIS-S Grating: NONE Type: TOO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 21 Obj_Flag: NO
2020:149:02:05:21.325 809253 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION TO ACIS-S WHILE RADMON IS DISABLED!
2020:149:02:05:55.664 809387 COMMAND_SW 4OHETGRE
2020:149:02:09:39.125 810260 COMMAND_HW CSELFMT2
2020:149:02:10:58.725 810570 SIMFOCUS -418
2020:149:02:12:27.125 810915 SIMFOCUS -468
2020:149:02:24:43.911 813790 ACISPKT AA00000000
2020:149:02:24:47.911 813806 ACISPKT AA00000000
2020:149:02:24:51.911 813822 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:02:25:15.911 813915 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2020:149:02:26:18.911 814161 ACISPKT WT00914014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00914014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:149:02:26:22.911 814177 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 22456
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00914B is WT00914014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,22456,OORMPDS,CSELFMT2,ENAB)
2020:149:02:26:26.911 814192 ACISPKT RS_0000001
2020:149:02:26:30.911 814208 ACISPKT RH_0000001
2020:149:06:50:33.911 876034 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:149:06:53:33.911 876737 MP_OBSID 22561
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22561:
Target Name: KIC 11606854 SI Mode: TE_00A22
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 21 Obj_Flag: NO
2020:149:06:53:33.911 876737 ACISPKT AA00000000
2020:149:06:53:37.911 876752 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:06:54:40.911 876998 ACISPKT RS_0000001
2020:149:07:03:56.304 879166 ACISPKT AA00000000
2020:149:07:04:00.304 879181 ACISPKT AA00000000
2020:149:07:04:04.304 879197 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:07:04:28.304 879290 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2020:149:07:05:31.304 879536 ACISPKT WT00A22024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a22024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:149:07:05:35.304 879552 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 22561
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A22B is WT00A22024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,22561,OORMPDS,CSELFMT2,ENAB)
2020:149:07:05:39.304 879568 ACISPKT RS_0000001
2020:149:07:05:43.304 879583 ACISPKT RH_0000001
2020:149:07:52:33.859 890451 ORBPOINT EAPOGEE
2020:149:12:57:32.304 961960 ACISPKT AA00000000
==> ACIS integration time of 20.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:149:13:00:32.304 962662 MP_OBSID 47184
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47184:
No ocat info found for obsid 47184
2020:149:13:00:32.304 962662 ACISPKT AA00000000
2020:149:13:00:36.304 962678 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:13:01:39.304 962924 ACISPKT RS_0000001
2020:149:13:26:38.275 968773 COMMAND_HW CSELFMT4
2020:149:13:27:12.614 968907 COMMAND_SW 4OHETGIN
2020:149:13:29:38.275 969476 MP_OBSID 22376
==> ObsID change occurs 29.1 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22376:
Target Name: 4U 1630-47 SI Mode: TE_00CC2
Instrument: ACIS-S Grating: HETG Type: TOO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: G Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: CUSTOM Start: 257 Rows: 512 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: Y Start Row: 470 Start Column: 160
Height: 100 Width: 100
Lower Energy: 0.08 Energy Range: 13 Sample Rate: 10
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 21 Obj_Flag: NO
LATEST OCAT WINDOW INFO FOR OBSID 22376:
Window on CCD: 7 Start Row: 470 Start Column: 160
Height: 100 Width: 100 Include: E
Lower Energy: 0.08 Energy Range: 13 Sample Rate: 10
2020:149:13:30:56.075 969779 COMMAND_HW CSELFMT2
2020:149:13:59:14.884 976409 ACISPKT AA00000000
2020:149:13:59:18.884 976424 ACISPKT AA00000000
2020:149:13:59:22.884 976440 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:13:59:46.884 976534 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2020:149:14:00:49.884 976780 ACISPKT WT00CC2014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00cc2014
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 2 # BEP_TE_MODE_GRADED
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 256
subarrayRowCount = 511
primaryExposure = 17
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 4
2020:149:14:00:53.884 976795 ACISPKT W200131014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00131014
ccdId = 7
ccdRow = 469
ccdColumn = 159
width = 99
height = 99
sampleCycle = 10
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
2020:149:14:00:57.884 976811 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 22376
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00CC2B is WT00CC2014 and is stored.
==> Window for SI mode TE_00CC2 is W200131014 and is stored.
>>>ERROR: Window Block and OCAT do not match
Please check the following errors
- Energy Filters Do Not Match for CCD 7.
Please compare these parameters
The actual energy filter in PHA is : lower:20 range: 3250
The requested is : lower:20 range:0
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,22376,OORMPDS,CSELFMT2,ENAB)
2020:149:14:01:01.884 976826 ACISPKT RS_0000001
2020:149:14:01:05.884 976842 ACISPKT RH_0000001
2020:149:16:45:01.285 REAL-TIME COMM BEGINS 2020:149:12:45:01.285 EDT
2020:149:18:15:01.285 REAL-TIME COMM ENDS 2020:149:14:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:149:21:13:19.884 1078048 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 99.98% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:149:21:16:19.884 1078750 MP_OBSID 47183
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47183:
No ocat info found for obsid 47183
2020:149:21:16:19.884 1078750 ACISPKT AA00000000
2020:149:21:16:23.884 1078766 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:21:17:26.884 1079012 ACISPKT RS_0000001
2020:149:22:03:53.596 1089887 COMMAND_HW CSELFMT4
2020:149:22:04:27.935 1090021 COMMAND_SW 4OHETGRE
2020:149:22:06:53.596 1090589 MP_OBSID 22108
==> ObsID change occurs 50.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 22108:
Target Name: H1821+643 SI Mode: TE_0091A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: -1 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNNYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:149:22:08:11.396 1090893 COMMAND_HW CSELFMT2
2020:149:22:16:19.884 1092799 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2020:149:22:17:22.884 1093045 ACISPKT RS_0000001
2020:149:22:22:32.852 1094255 ACISPKT AA00000000
2020:149:22:22:36.852 1094270 ACISPKT AA00000000
2020:149:22:22:40.852 1094286 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:149:22:23:04.852 1094379 ACISPKT WSPOW08002
==> WSPOW COMMAND LOADS: Feps 1; S3
2020:149:22:24:07.852 1094625 ACISPKT WT0091A014
ACIS PBLOCK LOADS:
parameterBlockId = 0x0091a014
fepCcdSelect = 10 7 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 4
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:149:22:24:11.852 1094641 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 22108
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0091AB is WT0091A014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,22108,OORMPDS,CSELFMT2,ENAB)
2020:149:22:24:15.852 1094657 ACISPKT RS_0000001
2020:149:22:24:19.852 1094672 ACISPKT RH_0000001
2020:150:01:45:01.285 REAL-TIME COMM BEGINS 2020:149:21:45:01.285 EDT
2020:150:02:44:23.852 1155566 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:150:02:47:23.852 1156268 MP_OBSID 47182
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47182:
No ocat info found for obsid 47182
2020:150:02:47:23.852 1156268 ACISPKT AA00000000
2020:150:02:47:27.852 1156284 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:02:48:30.852 1156530 ACISPKT RS_0000001
2020:150:03:15:01.285 REAL-TIME COMM ENDS 2020:149:23:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:150:03:21:15.180 1164195 COMMAND_HW CSELFMT4
2020:150:03:21:49.519 1164329 COMMAND_SW 4OHETGIN
2020:150:03:24:15.180 1164898 MP_OBSID 23038
==> ObsID change occurs 36.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 23038:
Target Name: RX J1712.6-2414 SI Mode: TE_00958
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 24 Remaining Exposure time: 24
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:150:03:25:32.980 1165201 COMMAND_HW CSELFMT2
2020:150:03:32:24.425 1166807 ACISPKT AA00000000
2020:150:03:32:28.425 1166823 ACISPKT AA00000000
2020:150:03:32:32.425 1166838 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:03:32:56.425 1166932 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2020:150:03:33:59.425 1167178 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:150:03:34:03.425 1167193 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 23038
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
>>>ERROR: ACIS IS IN THE FOCAL PLANE BUT RADMON IS NOT ENABLED!
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,23038,OORMPDS,CSELFMT2,ENAB)
2020:150:03:34:07.425 1167209 ACISPKT RS_0000001
2020:150:03:34:11.425 1167225 ACISPKT RH_0000001
2020:150:10:19:34.151 1262143 ACISPKT AA00000000
==> ACIS integration time of 23.09 ks.
This is 96.22% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:150:10:19:34.151 1262143 SIMTRANS -99616 (HRC-S)
2020:150:10:22:34.151 1262845 ACISPKT AA00000000
2020:150:10:22:34.151 1262845 MP_OBSID 47181
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 47181:
No ocat info found for obsid 47181
2020:150:10:22:38.151 1262861 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:10:23:41.151 1263106 ACISPKT RS_0000001
2020:150:10:25:11.551 1263459 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2020:150:10:25:11.551 1263459 ACISPKT AA00000000
2020:150:10:25:15.551 1263475 ACISPKT AA00000000
2020:150:10:25:19.551 1263490 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:10:25:43.551 1263584 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2020:150:10:26:46.551 1263830 ACISPKT WBTX_QUIET
2020:150:10:26:50.551 1263846 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2020:150:10:26:54.551 1263861 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 47181
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,47181,OORMPDS,CSELFMT2,ENAB)
2020:150:10:26:58.551 1263877 ACISPKT RS_0000001
2020:150:10:27:02.551 1263892 ACISPKT RH_0000001
2020:150:10:27:25.551 1263982 ACISPKT RBTXINGALL
2020:150:11:10:01.285 REAL-TIME COMM BEGINS 2020:150:07:10:01.285 EDT
2020:150:11:51:49.200 1283743 MP_OBSID 47180
==> ObsID change occurs 86.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47180:
No ocat info found for obsid 47180
2020:150:12:40:01.285 REAL-TIME COMM ENDS 2020:150:08:40:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:150:13:08:51.551 1301781 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2020:150:13:11:51.551 1302484 ACISPKT AA00000000
2020:150:13:11:51.551 1302484 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 150:13:11:51
from CRM file: EE1RADZ0 = 150:13:11:51
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2020:150:13:12:00.551 1302519 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:13:13:03.551 1302765 ACISPKT RS_0000001
2020:150:14:08:49.408 1315822 MP_OBSID 47179
==> ObsID change occurs 57.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 47179:
No ocat info found for obsid 47179
2020:150:14:11:51.551 1316532 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2020:150:14:12:54.551 1316778 ACISPKT RS_0000001
2020:150:15:07:42.343 1329609 MP_OBSID 47178
LATEST OCAT INFO FOR OBSID 47178:
No ocat info found for obsid 47178
2020:150:15:36:11.227 1333389 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
>>>ERROR: Time delta between the last WSVIDALLDN and the 2nd last AA00000000 is greater than 10.0 mins!
2020:150:16:32:28.672 1349458 MP_OBSID 47177
LATEST OCAT INFO FOR OBSID 47177:
No ocat info found for obsid 47177
2020:150:16:35:01.542 REAL-TIME COMM BEGINS 2020:150:12:35:01.542 EDT
2020:150:18:35:01.542 REAL-TIME COMM ENDS 2020:150:14:35:01.542 EDT
==> COMM DURATION: 120.00 mins.
2020:150:19:08:20.000 1385951 COMMAND_HW CSELFMT4
2020:150:19:08:20.000 1385951 MP_OBSID 47176
LATEST OCAT INFO FOR OBSID 47176:
No ocat info found for obsid 47176
2020:150:19:08:54.339 1386085 COMMAND_SW 4OHETGRE
2020:150:19:12:37.800 1386957 COMMAND_HW CSELFMT2
2020:150:20:15:52.869 1401767 MP_OBSID 47175
LATEST OCAT INFO FOR OBSID 47175:
No ocat info found for obsid 47175
2020:150:21:21:40.453 1417172 MP_OBSID 47174
LATEST OCAT INFO FOR OBSID 47174:
No ocat info found for obsid 47174
2020:150:21:39:51.551 1421430 ACISPKT AA00000000
2020:150:21:39:51.551 1421430 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2020:150:21:39:55.551 1421446 ACISPKT AA00000000
2020:150:21:39:59.551 1421461 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:21:40:23.551 1421555 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2020:150:21:41:26.551 1421801 ACISPKT WBTX_QUIET
2020:150:21:41:30.551 1421816 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2020:150:21:41:34.551 1421832 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 47174
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-OUT,LETG-OUT,47174,OORMPDS,CSELFMT2,ENAB)
2020:150:21:41:38.551 1421848 ACISPKT RS_0000001
2020:150:21:41:42.551 1421863 ACISPKT RH_0000001
2020:150:21:42:05.551 1421953 ACISPKT RBTXINGALL
2020:150:22:57:44.567 1439666 COMMAND_SW OORMPEN
==> Exit leg pad time is 4.67 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 150:21:39:51
from CRM file: XE1RADZ0 = 150:21:39:51
==> CRM Pad Time: 5 ks and Backstop Pad Time: 4.67 ks agree.
2020:150:23:00:11.551 1440240 ACISPKT AA00000000
==> ACIS integration time of 3.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2020:150:23:03:11.551 1440942 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2020:150:23:03:12.551 1440946 MP_OBSID 23270
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 23270:
Target Name: N132D SI Mode: TE_004C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 28 Remaining Exposure time: 28
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:150:23:03:12.551 1440946 ACISPKT AA00000000
2020:150:23:03:16.551 1440962 ACISPKT AA00000000
2020:150:23:03:20.551 1440977 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:150:23:03:44.551 1441071 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2020:150:23:04:47.551 1441317 ACISPKT WT004C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004c8034
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2020:150:23:04:51.551 1441332 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 23270
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004C8B is WT004C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,23270,OORMPEN,CSELFMT2,ENAB)
2020:150:23:04:55.551 1441348 ACISPKT RS_0000001
2020:150:23:04:59.551 1441364 ACISPKT RH_0000001
2020:150:23:45:01.285 REAL-TIME COMM BEGINS 2020:150:19:45:01.285 EDT
2020:151:01:15:01.285 REAL-TIME COMM ENDS 2020:150:21:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:151:07:14:09.551 1555900 ACISPKT AA00000000
==> ACIS integration time of 28.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:151:07:17:09.551 1556603 COMMAND_HW CSELFMT4
2020:151:07:17:09.551 1556603 MP_OBSID 21274
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 21274:
Target Name: RX J1712.6-2414 SI Mode: TE_008D0
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 27 Remaining Exposure time: 27
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:151:07:17:09.551 1556603 ACISPKT AA00000000
2020:151:07:17:13.551 1556618 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:151:07:17:43.890 1556737 COMMAND_SW 4OHETGIN
2020:151:07:18:16.551 1556864 ACISPKT RS_0000001
2020:151:07:21:27.351 1557609 COMMAND_HW CSELFMT2
2020:151:07:28:40.723 1559300 ACISPKT AA00000000
2020:151:07:28:44.723 1559315 ACISPKT AA00000000
2020:151:07:28:48.723 1559331 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:151:07:29:12.723 1559425 ACISPKT WSPOW3E03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S1 S2 S3 S4 S5
2020:151:07:30:15.723 1559671 ACISPKT WT008D0024
ACIS PBLOCK LOADS:
parameterBlockId = 0x008d0024
fepCcdSelect = 10 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:151:07:30:19.723 1559686 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 21274
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008D0B is WT008D0024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,21274,OORMPEN,CSELFMT2,ENAB)
2020:151:07:30:23.723 1559702 ACISPKT RS_0000001
2020:151:07:30:27.723 1559717 ACISPKT RH_0000001
2020:151:14:40:01.285 REAL-TIME COMM BEGINS 2020:151:10:40:01.285 EDT
2020:151:14:49:37.723 1662547 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 92.59% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:151:14:52:37.723 1663249 COMMAND_HW CSELFMT4
2020:151:14:52:37.723 1663249 MP_OBSID 21882
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 21882:
Target Name: N132D SI Mode: TE_004C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 35 Remaining Exposure time: 35
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:151:14:52:37.723 1663249 ACISPKT AA00000000
2020:151:14:52:41.723 1663265 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:151:14:53:12.062 1663383 COMMAND_SW 4OHETGRE
2020:151:14:53:44.723 1663511 ACISPKT RS_0000001
2020:151:14:56:55.523 1664255 COMMAND_HW CSELFMT2
2020:151:15:04:08.893 1665946 ACISPKT AA00000000
2020:151:15:04:12.893 1665962 ACISPKT AA00000000
2020:151:15:04:16.893 1665978 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:151:15:04:40.893 1666071 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2020:151:15:05:43.893 1666317 ACISPKT WT004C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004c8034
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2020:151:15:05:47.893 1666333 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 21882
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004C8B is WT004C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,21882,OORMPEN,CSELFMT2,ENAB)
2020:151:15:05:51.893 1666348 ACISPKT RS_0000001
2020:151:15:05:55.893 1666364 ACISPKT RH_0000001
2020:151:16:10:01.285 REAL-TIME COMM ENDS 2020:151:12:10:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:151:21:10:01.285 REAL-TIME COMM BEGINS 2020:151:17:10:01.285 EDT
2020:151:22:40:01.285 REAL-TIME COMM ENDS 2020:151:18:40:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:151:23:20:35.371 1772691 ORBPOINT EAPOGEE
2020:152:01:11:45.893 1808218 ACISPKT AA00000000
==> ACIS integration time of 35.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:152:01:14:45.893 1808920 COMMAND_HW CSELFMT4
2020:152:01:14:45.893 1808920 MP_OBSID 23267
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 23267:
Target Name: RX J1712.6-2414 SI Mode: TE_00958
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 26 Remaining Exposure time: 26
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:152:01:14:45.893 1808920 ACISPKT AA00000000
2020:152:01:14:49.893 1808936 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:152:01:15:20.232 1809054 COMMAND_SW 4OHETGIN
2020:152:01:15:52.893 1809181 ACISPKT RS_0000001
2020:152:01:19:03.693 1809926 COMMAND_HW CSELFMT2
2020:152:01:28:17.067 1812086 ACISPKT AA00000000
2020:152:01:28:21.067 1812101 ACISPKT AA00000000
2020:152:01:28:25.067 1812117 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:152:01:28:49.067 1812210 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2020:152:01:29:52.067 1812456 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:152:01:29:56.067 1812472 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 23267
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,23267,OORMPEN,CSELFMT2,ENAB)
2020:152:01:30:00.067 1812488 ACISPKT RS_0000001
2020:152:01:30:04.067 1812503 ACISPKT RH_0000001
2020:152:02:45:01.285 REAL-TIME COMM BEGINS 2020:151:22:45:01.285 EDT
2020:152:04:15:01.285 REAL-TIME COMM ENDS 2020:152:00:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:152:08:47:14.067 1914864 ACISPKT AA00000000
==> ACIS integration time of 25.00 ks.
This is 96.15% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:152:08:50:14.067 1915567 COMMAND_HW CSELFMT4
2020:152:08:50:14.067 1915567 MP_OBSID 21883
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 21883:
Target Name: N132D SI Mode: TE_004C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 33 Remaining Exposure time: 33
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: Y Lower: 0.1 Range: 12
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:152:08:50:14.067 1915567 ACISPKT AA00000000
2020:152:08:50:18.067 1915582 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:152:08:50:48.406 1915701 COMMAND_SW 4OHETGRE
2020:152:08:51:21.067 1915828 ACISPKT RS_0000001
2020:152:08:54:31.867 1916573 COMMAND_HW CSELFMT2
2020:152:09:01:45.238 1918264 ACISPKT AA00000000
2020:152:09:01:49.238 1918279 ACISPKT AA00000000
2020:152:09:01:53.238 1918295 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:152:09:02:17.238 1918389 ACISPKT WSPOW1CC3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I2 I3 S2 S3 S4
2020:152:09:03:20.238 1918635 ACISPKT WT004C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004c8034
fepCcdSelect = 10 7 6 3 8 2
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3000
windowSlotIndex = 65535
2020:152:09:03:24.238 1918650 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 21883
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004C8B is WT004C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,21883,OORMPEN,CSELFMT2,ENAB)
2020:152:09:03:28.238 1918666 ACISPKT RS_0000001
2020:152:09:03:32.238 1918681 ACISPKT RH_0000001
2020:152:12:35:01.285 REAL-TIME COMM BEGINS 2020:152:08:35:01.285 EDT
2020:152:14:05:01.285 REAL-TIME COMM ENDS 2020:152:10:05:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:152:18:36:02.238 2052730 ACISPKT AA00000000
==> ACIS integration time of 33.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:152:18:39:02.238 2053433 COMMAND_HW CSELFMT4
2020:152:18:39:02.238 2053433 MP_OBSID 23268
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 23268:
Target Name: RX J1712.6-2414 SI Mode: TE_008D0
Instrument: ACIS-S Grating: HETG Type: GO
Exposure Time: 23 Remaining Exposure time: 23
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither:
Y Amp: deg Y Freq: deg/sec Y Phase:
Z Amp: deg Z Freq: deg/sec Z Phase:
Cycle: 20 Obj_Flag: NO
2020:152:18:39:02.238 2053433 ACISPKT AA00000000
2020:152:18:39:06.238 2053448 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:152:18:39:36.577 2053567 COMMAND_SW 4OHETGIN
2020:152:18:40:09.238 2053694 ACISPKT RS_0000001
2020:152:18:43:20.038 2054439 COMMAND_HW CSELFMT2
2020:152:18:50:33.411 2056130 ACISPKT AA00000000
2020:152:18:50:37.411 2056145 ACISPKT AA00000000
2020:152:18:50:41.411 2056161 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:152:18:51:05.411 2056255 ACISPKT WSPOW3E03E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; S1 S2 S3 S4 S5
2020:152:18:52:08.411 2056501 ACISPKT WT008D0024
ACIS PBLOCK LOADS:
parameterBlockId = 0x008d0024
fepCcdSelect = 10 7 5 6 8 9
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2020:152:18:52:12.411 2056516 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 23268
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_008D0B is WT008D0024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,23268,OORMPEN,CSELFMT2,ENAB)
2020:152:18:52:16.411 2056532 ACISPKT RS_0000001
2020:152:18:52:20.411 2056547 ACISPKT RH_0000001
2020:152:20:50:01.285 REAL-TIME COMM BEGINS 2020:152:16:50:01.285 EDT
2020:152:22:20:01.285 REAL-TIME COMM ENDS 2020:152:18:20:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:153:01:20:31.303 2147439 ACISPKT AA00000000
==> ACIS integration time of 21.94 ks.
This is 95.40% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2020:153:01:20:31.303 2147439 SIMTRANS -99616 (HRC-S)
2020:153:01:23:31.303 2148141 ACISPKT AA00000000
2020:153:01:23:31.303 2148141 MP_OBSID 47173
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 47173:
No ocat info found for obsid 47173
2020:153:01:23:35.303 2148157 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:153:01:24:38.303 2148403 ACISPKT RS_0000001
2020:153:01:26:08.703 2148755 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00C60
2020:153:01:26:08.703 2148755 ACISPKT AA00000000
2020:153:01:26:12.703 2148771 ACISPKT AA00000000
2020:153:01:26:16.703 2148787 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:153:01:26:40.703 2148880 ACISPKT WSPOW08F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S3
2020:153:01:27:43.703 2149126 ACISPKT WBTX_QUIET
2020:153:01:27:47.703 2149142 ACISPKT WT00C60014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c60014
fepCcdSelect = 10 7 3 2 1 0
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2020:153:01:27:51.703 2149157 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 47173
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C60B is WT00C60014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,47173,OORMPDS,CSELFMT2,ENAB)
2020:153:01:27:55.703 2149173 ACISPKT RS_0000001
2020:153:01:27:59.703 2149189 ACISPKT RH_0000001
2020:153:01:28:22.703 2149278 ACISPKT RBTXINGALL
2020:153:02:45:01.285 REAL-TIME COMM BEGINS 2020:152:22:45:01.285 EDT
2020:153:04:09:48.703 2187077 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2020:153:04:12:48.703 2187780 ACISPKT AA00000000
2020:153:04:12:48.703 2187780 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 153:04:12:48
from CRM file: EE1RADZ0 = 153:04:12:48
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2020:153:04:12:57.703 2187815 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2020:153:04:14:00.703 2188061 ACISPKT RS_0000001
2020:153:04:15:01.285 REAL-TIME COMM ENDS 2020:153:00:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2020:153:05:12:48.703 2201829 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2020:153:05:13:51.703 2202074 ACISPKT RS_0000001
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 11 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
24 4 32 14 14 58
**NOTE: There are 1 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 5 5
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. The OBSID change to 47185 that occurs less than 3 mins after a stop science.
o. A SIM Translation to ACIS occurs while RADMON is DISABLED.
o. There are ACIS observations for which the RadMon has not been enabled.
o. The OBSID change to 47181 that occurs less than 3 mins after a stop science.
o. Time difference between a WSVIDALLDN command and the 2nd AA00000000 that precedes it is greater than 10 mins.
o. The OBSID change to 47173 that occurs less than 3 mins after a stop science.
o. The OCAT and the window block did NOT match for obsid(s)
- 22376
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED