-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2024/FEB1224/oflsa/CR043_0101.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2024/FEB0724/ofls/ACIS-History.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (ACIS-S,HETG-OUT,LETG-OUT,29243,OORMPEN,CSELFMT2,ENAB)
2024:043:01:48:33.505 3920186 MP_OBSID 27378
LATEST OCAT INFO FOR OBSID 27378:
Target Name: WISEA J050222.16-341201.6 SI Mode: TE_00600
Instrument: ACIS-S Grating: NONE Type: GTO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:043:01:52:39.277 3921145 ACISPKT AA00000000
2024:043:01:52:43.277 3921161 ACISPKT AA00000000
2024:043:01:52:47.277 3921177 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:043:01:53:11.277 3921270 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:043:01:54:14.277 3921516 ACISPKT WT00600034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00600034
fepCcdSelect = 4 7 5 6 8 9
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:043:01:54:18.277 3921532 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27378
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00600B is WT00600034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,27378,OORMPEN,CSELFMT2,ENAB)
2024:043:01:54:22.277 3921547 ACISPKT RS_0000001
2024:043:01:54:26.277 3921563 ACISPKT RH_0000001
2024:043:05:04:19.277 3966023 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:043:05:07:19.277 3966726 MP_OBSID 25561
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 25561:
Target Name: SDSS J140701.59+190417.9 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 5.2 Remaining Exposure time: 5.2
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.002222 deg Y Freq: 0.360000 deg/sec Y Phase: 0
Z Amp: 0.002222 deg Z Freq: 0.509100 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:043:05:33:36.243 3972880 ACISPKT AA00000000
2024:043:05:33:40.243 3972896 ACISPKT AA00000000
2024:043:05:33:44.243 3972911 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:043:05:34:08.243 3973005 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2024:043:05:35:11.243 3973251 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:043:05:35:15.243 3973266 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 25561
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,25561,OORMPEN,CSELFMT2,ENAB)
2024:043:05:35:19.243 3973282 ACISPKT RS_0000001
2024:043:05:35:23.243 3973297 ACISPKT RH_0000001
2024:043:05:47:59.243 3976248 AOENDITH AOENDITH
==> DITHER ENABLED
2024:043:07:22:29.764 3998377 ACISPKT AA00000000
==> ACIS integration time of 5.28 ks.
This is 101.55% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:043:07:22:29.764 3998377 SIMTRANS -99616 (HRC-S)
2024:043:07:25:29.764 3999079 COMMAND_HW CSELFMT6
2024:043:07:25:29.764 3999079 MP_OBSID 43712
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43712:
No ocat info found for obsid 43712
2024:043:07:26:04.103 3999213 COMMAND_SW 4OHETGIN
2024:043:07:28:07.164 3999693 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is
2024:043:07:29:47.564 4000085 COMMAND_HW CSELFMT2
2024:043:07:43:55.631 4003395 AOENDITH AOENDITH
==> DITHER ENABLED
2024:043:08:40:25.631 4016624 MP_OBSID 43711
LATEST OCAT INFO FOR OBSID 43711:
No ocat info found for obsid 43711
2024:043:09:36:12.435 4029685 ACISPKT AA00000000
2024:043:09:36:12.435 4029685 ORBPOINT EEF1000
==> Entry leg pad time is 7.69 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 043:09:36:12
from CRM file: EE1RADZ0 = 043:09:36:12
>>>CRM Pad Time: 0 ks and Backstop Pad Time: 7.69 ks do not agree!!
This could be due to extended CTI measurement
-OR- error in the load.
2024:043:09:36:21.435 4029720 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:043:09:37:24.435 4029966 ACISPKT RS_0000001
2024:043:12:45:52.885 4074096 MP_OBSID 43710
LATEST OCAT INFO FOR OBSID 43710:
No ocat info found for obsid 43710
2024:043:13:30:41.000 4084586 MP_OBSID 43709
LATEST OCAT INFO FOR OBSID 43709:
No ocat info found for obsid 43709
2024:043:13:56:40.623 4089657 ORBPOINT EPERIGEE
>>>ERROR: The radzone ACIS commanding triplet was not seen
>>>ERROR: Time delta between the last WSVIDALLDN and the 2nd last AA00000000 is greater than 10.0 mins!
2024:043:14:20:31.000 4096255 MP_OBSID 43708
LATEST OCAT INFO FOR OBSID 43708:
No ocat info found for obsid 43708
2024:043:14:52:51.000 4103825 MP_OBSID 43707
LATEST OCAT INFO FOR OBSID 43707:
No ocat info found for obsid 43707
2024:043:16:13:21.633 4122677 MP_OBSID 43706
LATEST OCAT INFO FOR OBSID 43706:
No ocat info found for obsid 43706
2024:043:16:52:12.435 4131772 ACISPKT RBTXINGBLL
2024:043:17:02:12.435 4131772 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2024:043:17:44:51.580 4144101 MP_OBSID 43705
LATEST OCAT INFO FOR OBSID 43705:
No ocat info found for obsid 43705
2024:043:17:45:01.285 REAL-TIME COMM BEGINS 2024:043:12:45:01.285 EST
2024:043:18:31:47.528 4155090 MP_OBSID 43704
LATEST OCAT INFO FOR OBSID 43704:
No ocat info found for obsid 43704
2024:043:19:15:01.285 REAL-TIME COMM ENDS 2024:043:14:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:043:19:48:51.435 4173134 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 043:17:02:12
from CRM file: XE1RADZ0 = 043:17:02:12
>>>CRM Pad Time: 0 ks and Backstop Pad Time: 10.00 ks do not agree!!
This could be due to extended CTI measurement
-OR- error in the load.
>>>ERROR: RADMON occurs 612.65 min AFTER stop science.
2024:043:19:48:52.435 4173138 COMMAND_HW CSELFMT6
2024:043:19:48:52.435 4173138 SIMTRANS 89824 (ACIS-I)
==> THERE IS A Z-SIM OF -7.75 mm FOR THIS OBSERVATION.
2024:043:19:48:53.435 4173142 MP_OBSID 26929
LATEST OCAT INFO FOR OBSID 26929:
Target Name: 1RXS J054255.8-212551 SI Mode: TE_00D58
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 47 Remaining Exposure time: 47
Offset: Y: -3 Z: 0 Z-sim: -7.752
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:043:19:49:26.774 4173272 COMMAND_SW 4OHETGRE
2024:043:19:53:10.235 4174144 COMMAND_HW CSELFMT2
2024:043:19:53:43.035 4174272 ACISPKT AA00000000
2024:043:19:53:47.035 4174288 ACISPKT AA00000000
2024:043:19:53:51.035 4174304 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:043:19:54:15.035 4174397 ACISPKT WSPOW00E0E
==> WSPOW COMMAND LOADS: Feps 1 2 3; I1 I2 I3
2024:043:19:54:48.835 4174529 SIMFOCUS -536
2024:043:19:55:18.035 4174643 ACISPKT WT00D58014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00d58014
fepCcdSelect = 10 3 2 1 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
>>> Warning - Long Dwell: 2024:043:19:55:22.035 Dwell time: 45172.3 seconds
2024:043:19:55:22.035 4174659 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26929
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00D58B is WT00D58014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,26929,OORMPEN,CSELFMT2,ENAB)
2024:043:19:55:26.035 4174674 ACISPKT RS_0000001
2024:043:19:55:30.035 4174690 ACISPKT RH_0000001
2024:044:03:20:01.285 REAL-TIME COMM BEGINS 2024:43:22:20:01.285 EST
2024:044:04:50:01.285 REAL-TIME COMM ENDS 2024:43:23:50:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:044:09:59:36.035 4372333 ACISPKT AA00000000
==> ACIS integration time of 49.50 ks.
This is 105.32% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:044:09:59:36.035 4372333 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:044:10:01:31.435 4372783 SIMFOCUS -418
2024:044:10:02:36.035 4373035 MP_OBSID 27202
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27202:
Target Name: IC 2431 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 11 Remaining Exposure time: 11
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:044:10:02:50.835 4373093 SIMFOCUS -468
2024:044:10:12:56.640 4375457 ACISPKT AA00000000
2024:044:10:13:00.640 4375473 ACISPKT AA00000000
2024:044:10:13:04.640 4375488 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:044:10:13:28.640 4375582 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:044:10:14:31.640 4375828 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:044:10:14:35.640 4375843 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27202
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,27202,OORMPEN,CSELFMT2,ENAB)
2024:044:10:14:39.640 4375859 ACISPKT RS_0000001
2024:044:10:14:43.640 4375875 ACISPKT RH_0000001
2024:044:13:50:47.640 4426466 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 109.09% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:044:13:53:47.640 4427168 MP_OBSID 29275
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29275:
Target Name: WISEA J050222.16-341201.6 SI Mode: TE_00600
Instrument: ACIS-S Grating: NONE Type: GTO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN YYYYYY
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:044:13:59:53.166 4428595 ACISPKT AA00000000
2024:044:13:59:57.166 4428610 ACISPKT AA00000000
2024:044:14:00:01.166 4428626 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:044:14:00:25.166 4428720 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:044:14:01:28.166 4428965 ACISPKT WT00600034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00600034
fepCcdSelect = 4 7 5 6 8 9
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:044:14:01:32.166 4428981 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29275
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00600B is WT00600034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29275,OORMPEN,CSELFMT2,ENAB)
2024:044:14:01:36.166 4428997 ACISPKT RS_0000001
2024:044:14:01:40.166 4429012 ACISPKT RH_0000001
2024:044:14:25:01.285 REAL-TIME COMM BEGINS 2024:044:09:25:01.285 EST
2024:044:15:45:01.285 REAL-TIME COMM ENDS 2024:044:10:45:01.285 EST
==> COMM DURATION: 80.00 mins.
2024:044:18:34:53.166 4492985 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:044:18:37:53.166 4493687 MP_OBSID 29273
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29273:
Target Name: IC 2431 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:044:18:51:09.903 4496797 ACISPKT AA00000000
2024:044:18:51:13.903 4496812 ACISPKT AA00000000
2024:044:18:51:17.903 4496828 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:044:18:51:41.903 4496922 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:044:18:52:44.903 4497167 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:044:18:52:48.903 4497183 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29273
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29273,OORMPEN,CSELFMT2,ENAB)
2024:044:18:52:52.903 4497199 ACISPKT RS_0000001
2024:044:18:52:56.903 4497214 ACISPKT RH_0000001
2024:044:21:40:24.067 4500871 ORBPOINT EAPOGEE
2024:044:22:12:20.903 4543903 ACISPKT AA00000000
==> ACIS integration time of 11.00 ks.
This is 110.00% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:044:22:15:20.903 4544605 MP_OBSID 26710
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26710:
Target Name: DES J0322-18 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 11 Remaining Exposure time: 11
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:044:22:46:11.025 4551825 ACISPKT WSVIDALLDN
2024:044:22:46:29.025 4551896 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:044:22:47:32.025 4552141 ACISPKT WT0057B034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057b034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:044:22:47:36.025 4552157 ACISPKT RS_0000001
2024:044:22:47:40.025 4552173 ACISPKT RH_0000001
2024:044:22:48:03.025 4552262 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26710
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057A is WT0057B034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,26710,OORMPEN,CSELFMT2,ENAB)
2024:045:02:08:10.025 4599119 ACISPKT AA00000000
==> ACIS integration time of 12.01 ks.
This is 109.15% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:02:08:10.025 4599119 SIMTRANS -50504 (HRC-I)
2024:045:02:11:10.025 4599821 COMMAND_HW CSELFMT1
2024:045:02:11:10.025 4599821 MP_OBSID 26963
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26963:
No ACIS info found for obsid 26963.
This is an HRC-I observation.
2024:045:02:12:39.425 4600170 SIMFOCUS -716
2024:045:02:24:10.382 4602867 ACISPKT AA00000000
2024:045:02:24:14.382 4602882 ACISPKT AA00000000
2024:045:02:24:18.382 4602898 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:045:02:24:42.382 4602992 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2024:045:02:25:45.382 4603238 ACISPKT RS_0000001
2024:045:02:25:49.382 4603253 ACISPKT RH_0000001
2024:045:02:26:12.382 4603343 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2024:045:02:26:16.382 4603358 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2024:045:02:26:20.382 4603374 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,26963,OORMPEN,CSELFMT1,ENAB)
2024:045:02:57:05.382 4610574 AOENDITH AOENDITH
==> DITHER ENABLED
2024:045:02:58:41.382 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2024:045:04:15:01.285 REAL-TIME COMM BEGINS 2024:44:23:15:01.285 EST
2024:045:04:26:55.382 4631608 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 120.58 minutes AFTER A START SCIENCE.
2024:045:04:27:07.382 4631655 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:04:27:07.382 215PCAOF command: HRC Observation Ends
2024:045:04:27:09.382 4631663 COMMAND_HW CSELFMT2
2024:045:04:27:09.382 4631663 MP_OBSID 27141
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 27141:
Target Name: [APH2018] SDSS J1020+1040 nebula SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 9.1 Remaining Exposure time: 9.1
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:045:04:31:48.782 4632753 SIMFOCUS -486
2024:045:04:33:10.182 4633071 SIMFOCUS -536
2024:045:04:36:13.802 4633787 ACISPKT AA00000000
2024:045:04:36:17.802 4633803 ACISPKT AA00000000
2024:045:04:36:21.802 4633819 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:045:04:36:45.802 4633912 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:045:04:37:48.802 4634158 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:045:04:37:52.802 4634174 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27141
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27141,OORMPEN,CSELFMT2,ENAB)
2024:045:04:37:56.802 4634189 ACISPKT RS_0000001
2024:045:04:38:00.802 4634205 ACISPKT RH_0000001
2024:045:04:52:00.802 4637483 AOENDITH AOENDITH
==> DITHER ENABLED
2024:045:05:45:01.285 REAL-TIME COMM ENDS 2024:045:00:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:045:07:45:10.802 4678029 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 109.89% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:07:48:10.802 4678732 MP_OBSID 26682
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26682:
Target Name: XMMU J183239.7-091610 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:045:08:26:20.694 4687668 ACISPKT WSVIDALLDN
2024:045:08:26:38.694 4687738 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:045:08:27:41.694 4687984 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:045:08:27:45.694 4688000 ACISPKT RS_0000001
2024:045:08:27:49.694 4688015 ACISPKT RH_0000001
2024:045:08:28:12.694 4688105 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26682
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,26682,OORMPEN,CSELFMT2,ENAB)
2024:045:11:14:59.694 4727157 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:11:17:59.694 4727859 MP_OBSID 29270
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29270:
Target Name: [APH2018] SDSS J1020+1040 nebula SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 9.1 Remaining Exposure time: 9.1
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:045:11:56:09.507 4736795 ACISPKT WSVIDALLDN
2024:045:11:56:27.507 4736865 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:045:11:57:30.507 4737111 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:045:11:57:34.507 4737127 ACISPKT RS_0000001
2024:045:11:57:38.507 4737142 ACISPKT RH_0000001
2024:045:11:58:01.507 4737232 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29270
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29270,OORMPEN,CSELFMT2,ENAB)
2024:045:12:15:01.285 REAL-TIME COMM BEGINS 2024:045:07:15:01.285 EST
2024:045:13:45:01.285 REAL-TIME COMM ENDS 2024:045:08:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:045:14:44:48.507 4776284 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 109.97% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:14:47:48.507 4776986 MP_OBSID 29265
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29265:
Target Name: XMMU J183239.7-091610 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:045:15:25:58.436 4785923 ACISPKT WSVIDALLDN
2024:045:15:26:16.436 4785993 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:045:15:27:19.436 4786239 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:045:15:27:23.436 4786254 ACISPKT RS_0000001
2024:045:15:27:27.436 4786270 ACISPKT RH_0000001
2024:045:15:27:50.436 4786360 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29265
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29265,OORMPEN,CSELFMT2,ENAB)
2024:045:18:14:37.436 4825411 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:18:17:37.436 4826114 MP_OBSID 43703
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43703:
No ocat info found for obsid 43703
2024:045:18:36:46.852 4830599 MP_OBSID 26854
LATEST OCAT INFO FOR OBSID 26854:
Target Name: AGC 721931 SI Mode: TE_00972
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12.9 Remaining Exposure time: 12.9
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:045:18:36:46.852 4830599 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:045:18:38:46.252 4831065 SIMFOCUS -418
2024:045:18:40:05.652 4831375 SIMFOCUS -468
2024:045:18:53:59.125 4834628 ACISPKT AA00000000
2024:045:18:54:03.125 4834643 ACISPKT AA00000000
2024:045:18:54:07.125 4834659 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:045:18:54:31.125 4834753 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:045:18:55:34.125 4834998 ACISPKT WT00972024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00972024
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:045:18:55:38.125 4835014 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26854
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00972B is WT00972024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,26854,OORMPEN,CSELFMT2,ENAB)
2024:045:18:55:42.125 4835030 ACISPKT RS_0000001
2024:045:18:55:46.125 4835045 ACISPKT RH_0000001
2024:045:23:06:37.252 4893781 ACISPKT AA00000000
==> ACIS integration time of 14.09 ks.
This is 109.20% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:045:23:06:37.252 4893781 SIMTRANS -99616 (HRC-S)
2024:045:23:09:37.252 4894484 COMMAND_HW CSELFMT6
2024:045:23:09:37.252 4894484 MP_OBSID 43702
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43702:
No ocat info found for obsid 43702
2024:045:23:10:11.591 4894618 COMMAND_SW 4OHETGIN
2024:045:23:12:14.652 4895098 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2024:045:23:12:14.652 4895098 ACISPKT AA00000000
2024:045:23:12:18.652 4895114 ACISPKT AA00000000
2024:045:23:12:22.652 4895129 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:045:23:12:46.652 4895223 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2024:045:23:13:49.652 4895469 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:045:23:13:53.652 4895484 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43702
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43702,OORMPDS,CSELFMT6,ENAB)
2024:045:23:13:55.052 4895490 COMMAND_HW CSELFMT2
2024:045:23:13:57.652 4895500 ACISPKT RS_0000001
2024:045:23:14:01.652 4895516 ACISPKT RH_0000001
2024:046:00:00:01.285 REAL-TIME COMM BEGINS 2024:046:19:00:01.285 EST
2024:046:00:12:49.382 4909282 MP_OBSID 43701
==> ObsID change occurs 60.5 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43701:
No ocat info found for obsid 43701
2024:046:00:53:19.923 4918767 ACISPKT AA00000000
==> ACIS integration time of 4.57 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:046:00:56:19.923 4919470 ACISPKT AA00000000
2024:046:00:56:19.923 4919470 ORBPOINT EEF1000
==> Entry leg pad time is 6.25 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 046:00:56:19
from CRM file: EE1RADZ0 = 046:00:56:19
==> CRM Pad Time: 6.245 ks and Backstop Pad Time: 6.25 ks agree.
2024:046:00:56:28.923 4919505 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:046:00:57:31.923 4919751 ACISPKT RS_0000001
2024:046:01:15:01.285 REAL-TIME COMM ENDS 2024:45:20:15:01.285 EST
==> COMM DURATION: 75.00 mins.
2024:046:02:56:22.011 4947576 MP_OBSID 43700
LATEST OCAT INFO FOR OBSID 43700:
No ocat info found for obsid 43700
2024:046:04:57:30.000 4975938 MP_OBSID 43699
LATEST OCAT INFO FOR OBSID 43699:
No ocat info found for obsid 43699
2024:046:05:24:01.042 4981160 ORBPOINT EPERIGEE
2024:046:05:47:20.000 4987607 MP_OBSID 43698
LATEST OCAT INFO FOR OBSID 43698:
No ocat info found for obsid 43698
2024:046:06:22:40.000 4995880 MP_OBSID 43697
LATEST OCAT INFO FOR OBSID 43697:
No ocat info found for obsid 43697
2024:046:07:52:19.923 5016875 ACISPKT RBTXINGBLL
2024:046:08:02:19.923 5016875 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2024:046:10:42:13.573 5056655 COMMAND_HW CSELFMT6
2024:046:10:42:47.912 5056789 COMMAND_SW 4OHETGRE
2024:046:10:46:31.373 5057661 COMMAND_HW CSELFMT2
2024:046:10:48:58.923 5058237 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 046:08:02:19
from CRM file: XE1RADZ0 = 046:08:02:19
>>>CRM Pad Time: 0 ks and Backstop Pad Time: 10.00 ks do not agree!!
This could be due to extended CTI measurement
-OR- error in the load.
>>>ERROR: RADMON occurs 592.65 min AFTER stop science.
2024:046:10:48:59.923 5058241 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:046:10:48:59.923 5058241 ACISPKT AA00000000
2024:046:10:49:00.923 5058244 MP_OBSID 27146
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 27146:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 16 Remaining Exposure time: 16
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:046:10:49:03.923 5058256 ACISPKT AA00000000
2024:046:10:49:07.923 5058272 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:046:10:49:31.923 5058365 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:046:10:50:34.923 5058611 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
>>> Warning - Long Dwell: 2024:046:10:50:38.923 Dwell time: 35839.0 seconds
2024:046:10:50:38.923 5058627 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27146
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27146,OORMPEN,CSELFMT2,ENAB)
2024:046:10:50:42.923 5058643 ACISPKT RS_0000001
2024:046:10:50:46.923 5058658 ACISPKT RH_0000001
2024:046:10:55:00.323 5059647 SIMFOCUS -536
2024:046:11:45:01.285 REAL-TIME COMM BEGINS 2024:046:06:45:01.285 EST
2024:046:13:15:01.285 REAL-TIME COMM ENDS 2024:046:08:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:046:15:54:36.923 5129800 ACISPKT AA00000000
==> ACIS integration time of 17.00 ks.
This is 106.25% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:046:15:54:36.923 5129800 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:046:15:56:36.323 5130266 SIMFOCUS -418
2024:046:15:57:36.923 5130502 MP_OBSID 29267
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29267:
Target Name: DES J0322-18 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 9.5 Remaining Exposure time: 9.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:046:15:57:55.723 5130575 SIMFOCUS -468
2024:046:16:09:39.100 5133320 ACISPKT AA00000000
2024:046:16:09:43.100 5133336 ACISPKT AA00000000
2024:046:16:09:47.100 5133352 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:046:16:10:11.100 5133445 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:046:16:11:14.100 5133691 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:046:16:11:18.100 5133707 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29267
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29267,OORMPEN,CSELFMT2,ENAB)
2024:046:16:11:22.100 5133722 ACISPKT RS_0000001
2024:046:16:11:26.100 5133738 ACISPKT RH_0000001
2024:046:19:14:10.100 5176524 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 105.26% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:046:19:14:10.100 5176524 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:046:19:16:09.500 5176990 SIMFOCUS -536
2024:046:19:17:10.100 5177227 MP_OBSID 29272
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29272:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 14 Remaining Exposure time: 14
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:046:19:24:46.563 5179008 ACISPKT AA00000000
2024:046:19:24:50.563 5179024 ACISPKT AA00000000
2024:046:19:24:54.563 5179039 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:046:19:25:18.563 5179133 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:046:19:26:21.563 5179379 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:046:19:26:25.563 5179394 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29272
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29272,OORMPEN,CSELFMT2,ENAB)
2024:046:19:26:29.563 5179410 ACISPKT RS_0000001
2024:046:19:26:33.563 5179425 ACISPKT RH_0000001
2024:046:23:57:03.563 5242762 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 107.14% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:046:23:57:03.563 5242762 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:046:23:59:02.963 5243228 SIMFOCUS -418
2024:047:00:00:03.563 5243465 MP_OBSID 29268
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29268:
Target Name: DES J0322-18 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 9.5 Remaining Exposure time: 9.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:047:00:00:22.363 5243538 SIMFOCUS -468
2024:047:00:12:06.131 5246284 ACISPKT AA00000000
2024:047:00:12:10.131 5246300 ACISPKT AA00000000
2024:047:00:12:14.131 5246316 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:00:12:38.131 5246409 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:047:00:13:41.131 5246655 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:00:13:45.131 5246671 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29268
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29268,OORMPEN,CSELFMT2,ENAB)
2024:047:00:13:49.131 5246686 ACISPKT RS_0000001
2024:047:00:13:53.131 5246702 ACISPKT RH_0000001
2024:047:03:05:01.285 REAL-TIME COMM BEGINS 2024:46:22:05:01.285 EST
2024:047:03:16:37.131 5289488 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 105.26% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:047:03:19:37.131 5290191 MP_OBSID 29183
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29183:
Target Name: 3C 196.1 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 7.5 Remaining Exposure time: 7.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:047:03:26:09.489 5291722 ACISPKT AA00000000
2024:047:03:26:13.489 5291737 ACISPKT AA00000000
2024:047:03:26:17.489 5291753 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:03:26:41.489 5291847 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2024:047:03:27:44.489 5292093 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:03:27:48.489 5292108 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29183
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29183,OORMPEN,CSELFMT2,ENAB)
2024:047:03:27:52.489 5292124 ACISPKT RS_0000001
2024:047:03:27:56.489 5292139 ACISPKT RH_0000001
2024:047:04:35:01.285 REAL-TIME COMM ENDS 2024:46:23:35:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:047:05:53:26.489 5326208 ACISPKT AA00000000
==> ACIS integration time of 7.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:047:05:56:26.489 5326910 MP_OBSID 28195
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28195:
Target Name: 2MFGC 3185 SI Mode: TE_00A20
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:047:06:02:01.884 5328219 ACISPKT AA00000000
2024:047:06:02:05.884 5328235 ACISPKT AA00000000
2024:047:06:02:09.884 5328250 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:06:02:33.884 5328344 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2024:047:06:03:36.884 5328590 ACISPKT WT00A20024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a20024
fepCcdSelect = 10 7 6 3 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:06:03:40.884 5328605 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28195
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A20B is WT00A20024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28195,OORMPEN,CSELFMT2,ENAB)
2024:047:06:03:44.884 5328621 ACISPKT RS_0000001
2024:047:06:03:48.884 5328636 ACISPKT RH_0000001
2024:047:09:19:18.884 5374412 ACISPKT AA00000000
==> ACIS integration time of 10.50 ks.
This is 105.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:047:09:22:18.884 5375115 MP_OBSID 29274
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29274:
Target Name: IC 2431 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 9 Remaining Exposure time: 9
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:047:09:34:38.818 5378002 ACISPKT AA00000000
2024:047:09:34:42.818 5378018 ACISPKT AA00000000
2024:047:09:34:46.818 5378033 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:09:35:10.818 5378127 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:047:09:36:13.818 5378373 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:09:36:17.818 5378388 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29274
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29274,OORMPEN,CSELFMT2,ENAB)
2024:047:09:36:21.818 5378404 ACISPKT RS_0000001
2024:047:09:36:25.818 5378420 ACISPKT RH_0000001
2024:047:11:15:01.285 REAL-TIME COMM BEGINS 2024:047:06:15:01.285 EST
2024:047:12:34:59.818 5420230 ACISPKT AA00000000
==> ACIS integration time of 9.75 ks.
This is 108.33% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:047:12:34:59.818 5420230 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:047:12:36:59.218 5420696 SIMFOCUS -536
2024:047:12:37:59.818 5420933 MP_OBSID 28588
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28588:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:047:12:45:01.285 REAL-TIME COMM ENDS 2024:047:07:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:047:12:49:39.115 5423662 ACISPKT AA00000000
2024:047:12:49:43.115 5423677 ACISPKT AA00000000
2024:047:12:49:47.115 5423693 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:12:50:11.115 5423787 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:047:12:51:14.115 5424033 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:12:51:18.115 5424048 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28588
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,28588,OORMPEN,CSELFMT2,ENAB)
2024:047:12:51:22.115 5424064 ACISPKT RS_0000001
2024:047:12:51:26.115 5424079 ACISPKT RH_0000001
2024:047:13:08:15.535 5428019 ORBPOINT EAPOGEE
2024:047:15:58:36.115 5467904 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:047:15:58:36.115 5467904 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:047:16:00:35.515 5468370 SIMFOCUS -418
2024:047:16:01:36.115 5468606 MP_OBSID 28271
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28271:
Target Name: SDSS J091315.72+015202.0 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 14.7 Remaining Exposure time: 14.7
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:047:16:01:54.915 5468680 SIMFOCUS -468
2024:047:16:19:01.330 5472685 ACISPKT AA00000000
2024:047:16:19:05.330 5472701 ACISPKT AA00000000
2024:047:16:19:09.330 5472716 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:16:19:33.330 5472810 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:047:16:20:36.330 5473056 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:16:20:40.330 5473071 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28271
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28271,OORMPEN,CSELFMT2,ENAB)
2024:047:16:20:44.330 5473087 ACISPKT RS_0000001
2024:047:16:20:48.330 5473103 ACISPKT RH_0000001
2024:047:20:23:32.330 5529938 ACISPKT AA00000000
==> ACIS integration time of 13.60 ks.
This is 92.52% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:047:20:26:32.330 5530640 MP_OBSID 43696
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43696:
No ocat info found for obsid 43696
2024:047:20:51:00.702 5536370 MP_OBSID 28061
LATEST OCAT INFO FOR OBSID 28061:
Target Name: eRASSU J133355.8-665647 SI Mode: TE_0065A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:047:20:51:00.702 5536370 ACISPKT AA00000000
2024:047:20:51:04.702 5536386 ACISPKT AA00000000
2024:047:20:51:08.702 5536402 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:047:20:51:32.702 5536495 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2024:047:20:52:35.702 5536741 ACISPKT WT0065A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0065a034
fepCcdSelect = 10 7 6 3 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:047:20:52:39.702 5536757 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28061
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0065AB is WT0065A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28061,OORMPEN,CSELFMT2,ENAB)
2024:047:20:52:43.702 5536772 ACISPKT RS_0000001
2024:047:20:52:47.702 5536788 ACISPKT RH_0000001
2024:047:21:55:01.285 REAL-TIME COMM BEGINS 2024:047:16:55:01.285 EST
2024:047:23:25:01.285 REAL-TIME COMM ENDS 2024:047:18:25:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:048:01:48:17.702 5605978 ACISPKT AA00000000
==> ACIS integration time of 16.50 ks.
This is 110.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:048:01:48:17.702 5605978 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:048:01:50:17.102 5606444 SIMFOCUS -536
2024:048:01:51:17.702 5606681 MP_OBSID 29271
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29271:
Target Name: [APH2018] SDSS J1020+1040 nebula SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 9 Remaining Exposure time: 9
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:048:02:03:03.472 5609435 ACISPKT AA00000000
2024:048:02:03:07.472 5609450 ACISPKT AA00000000
2024:048:02:03:11.472 5609466 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:048:02:03:35.472 5609560 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:048:02:04:38.472 5609806 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:048:02:04:42.472 5609821 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29271
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29271,OORMPEN,CSELFMT2,ENAB)
2024:048:02:04:46.472 5609837 ACISPKT RS_0000001
2024:048:02:04:50.472 5609852 ACISPKT RH_0000001
2024:048:03:10:01.285 REAL-TIME COMM BEGINS 2024:47:22:10:01.285 EST
2024:048:04:40:01.285 REAL-TIME COMM ENDS 2024:47:23:40:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:048:05:07:00.472 5652506 ACISPKT AA00000000
==> ACIS integration time of 9.70 ks.
This is 107.78% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:048:05:10:00.472 5653209 MP_OBSID 26567
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26567:
Target Name: Swift J1728.9-3613 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10.5 Remaining Exposure time: 10.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:048:05:45:08.088 5661433 ACISPKT WSVIDALLDN
2024:048:05:45:26.088 5661504 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:048:05:46:29.088 5661749 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:048:05:46:33.088 5661765 ACISPKT RS_0000001
2024:048:05:46:37.088 5661781 ACISPKT RH_0000001
2024:048:05:47:00.088 5661870 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26567
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,26567,OORMPEN,CSELFMT2,ENAB)
2024:048:08:50:27.088 5704825 ACISPKT AA00000000
==> ACIS integration time of 11.01 ks.
This is 104.83% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:048:08:53:27.088 5705527 MP_OBSID 43695
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43695:
No ocat info found for obsid 43695
2024:048:09:15:09.946 5710611 MP_OBSID 29269
LATEST OCAT INFO FOR OBSID 29269:
Target Name: AGC 721931 SI Mode: TE_00972
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 15.1 Remaining Exposure time: 15.1
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:048:09:15:09.946 5710611 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:048:09:17:09.346 5711077 SIMFOCUS -418
2024:048:09:18:28.746 5711387 SIMFOCUS -468
2024:048:09:33:12.929 5714838 ACISPKT AA00000000
2024:048:09:33:16.929 5714853 ACISPKT AA00000000
2024:048:09:33:20.929 5714869 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:048:09:33:44.929 5714963 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:048:09:34:47.929 5715208 ACISPKT WT00972024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00972024
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:048:09:34:51.929 5715224 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29269
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00972B is WT00972024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29269,OORMPEN,CSELFMT2,ENAB)
2024:048:09:34:55.929 5715240 ACISPKT RS_0000001
2024:048:09:34:59.929 5715255 ACISPKT RH_0000001
2024:048:13:25:01.285 REAL-TIME COMM BEGINS 2024:048:08:25:01.285 EST
2024:048:14:27:35.659 5783765 ACISPKT AA00000000
==> ACIS integration time of 16.59 ks.
This is 109.88% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:048:14:27:35.659 5783765 SIMTRANS -99616 (HRC-S)
2024:048:14:30:35.659 5784468 COMMAND_HW CSELFMT6
2024:048:14:30:35.659 5784468 MP_OBSID 43694
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43694:
No ocat info found for obsid 43694
2024:048:14:31:09.998 5784602 COMMAND_SW 4OHETGIN
2024:048:14:33:13.059 5785082 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2024:048:14:33:13.059 5785082 ACISPKT AA00000000
2024:048:14:33:17.059 5785098 ACISPKT AA00000000
2024:048:14:33:21.059 5785113 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:048:14:33:45.059 5785207 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:048:14:34:48.059 5785453 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:048:14:34:52.059 5785468 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43694
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43694,OORMPDS,CSELFMT6,ENAB)
2024:048:14:34:53.459 5785474 COMMAND_HW CSELFMT2
2024:048:14:34:56.059 5785484 ACISPKT RS_0000001
2024:048:14:35:00.059 5785500 ACISPKT RH_0000001
2024:048:14:55:01.285 REAL-TIME COMM ENDS 2024:048:09:55:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:048:15:38:36.008 5800391 MP_OBSID 43693
==> ObsID change occurs 65.3 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43693:
No ocat info found for obsid 43693
2024:048:16:51:59.188 5817574 MP_OBSID 43692
LATEST OCAT INFO FOR OBSID 43692:
No ocat info found for obsid 43692
2024:048:17:16:53.059 5823404 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:048:17:19:53.059 5824106 ACISPKT AA00000000
2024:048:17:19:53.059 5824106 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 048:17:19:53
from CRM file: EE1RADZ0 = 048:17:19:53
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:048:17:20:02.059 5824142 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:048:17:21:05.059 5824387 ACISPKT RS_0000001
2024:048:20:26:00.000 5867685 MP_OBSID 43691
LATEST OCAT INFO FOR OBSID 43691:
No ocat info found for obsid 43691
2024:048:20:52:31.685 5872913 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2024:048:21:15:50.000 5879353 MP_OBSID 43690
LATEST OCAT INFO FOR OBSID 43690:
No ocat info found for obsid 43690
2024:048:22:14:20.000 5893051 MP_OBSID 43689
LATEST OCAT INFO FOR OBSID 43689:
No ocat info found for obsid 43689
2024:049:00:15:53.059 5921511 ACISPKT RBTXINGBLL
2024:049:00:25:53.059 5923853 ACISPKT AA00000000
2024:049:00:25:53.059 5923853 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2024:049:00:25:57.059 5923868 ACISPKT AA00000000
2024:049:00:26:01.059 5923884 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:049:00:26:25.059 5923978 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2024:049:00:27:28.059 5924223 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:049:00:27:32.059 5924239 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43689
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43689,OORMPDS,CSELFMT2,ENAB)
2024:049:00:27:36.059 5924255 ACISPKT RS_0000001
2024:049:00:27:40.059 5924270 ACISPKT RH_0000001
2024:049:01:40:57.583 5941431 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:049:01:41:31.922 5941565 COMMAND_SW 4OHETGRE
2024:049:01:45:15.383 5942437 COMMAND_HW CSELFMT2
2024:049:01:48:47.788 5943266 ACISPKT AA00000000
==> ACIS integration time of 0.44 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:049:01:51:46.788 5943965 COMMAND_SW OORMPEN
==> Exit leg pad time is 5.15 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 049:00:25:53
from CRM file: XE1RADZ0 = 049:00:25:53
==> CRM Pad Time: 5.155 ks and Backstop Pad Time: 5.15 ks agree.
2024:049:01:51:47.788 5943969 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:049:01:51:47.788 5943969 ACISPKT AA00000000
2024:049:01:51:48.788 5943973 MP_OBSID 28117
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 28117:
Target Name: IC559 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 9 Remaining Exposure time: 9
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:049:01:51:51.788 5943984 ACISPKT AA00000000
2024:049:01:51:55.788 5944000 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:049:01:52:19.788 5944094 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:049:01:53:22.788 5944339 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:01:53:26.788 5944355 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28117
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,28117,OORMPEN,CSELFMT2,ENAB)
2024:049:01:53:30.788 5944371 ACISPKT RS_0000001
2024:049:01:53:34.788 5944386 ACISPKT RH_0000001
2024:049:01:57:48.188 5945375 SIMFOCUS -536
2024:049:03:10:01.285 REAL-TIME COMM BEGINS 2024:48:22:10:01.285 EST
2024:049:04:40:01.285 REAL-TIME COMM ENDS 2024:48:23:40:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:049:04:44:04.788 5984308 ACISPKT AA00000000
==> ACIS integration time of 9.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:049:04:47:04.788 5985011 MP_OBSID 29276
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29276:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:049:05:21:43.092 5993121 ACISPKT WSVIDALLDN
2024:049:05:22:01.092 5993191 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:049:05:23:04.092 5993437 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:05:23:08.092 5993453 ACISPKT RS_0000001
2024:049:05:23:12.092 5993468 ACISPKT RH_0000001
2024:049:05:23:35.092 5993558 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29276
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29276,OORMPEN,CSELFMT2,ENAB)
2024:049:08:10:22.092 6032610 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:049:08:10:22.092 6032610 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:049:08:12:21.492 6033076 SIMFOCUS -418
2024:049:08:13:22.092 6033312 MP_OBSID 29262
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29262:
Target Name: SDSSJ091424.76+115625.6 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:049:08:13:40.892 6033386 SIMFOCUS -468
2024:049:08:29:58.263 6037200 ACISPKT AA00000000
2024:049:08:30:02.263 6037215 ACISPKT AA00000000
2024:049:08:30:06.263 6037231 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:049:08:30:30.263 6037325 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:049:08:31:33.263 6037571 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:08:31:37.263 6037586 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29262
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29262,OORMPEN,CSELFMT2,ENAB)
2024:049:08:31:41.263 6037602 ACISPKT RS_0000001
2024:049:08:31:45.263 6037617 ACISPKT RH_0000001
2024:049:11:15:01.285 REAL-TIME COMM BEGINS 2024:049:06:15:01.285 EST
2024:049:11:26:09.263 6078453 ACISPKT AA00000000
==> ACIS integration time of 9.50 ks.
This is 95.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:049:11:26:09.263 6078453 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:049:11:28:08.663 6078919 SIMFOCUS -536
2024:049:11:29:09.263 6079155 MP_OBSID 29277
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29277:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:049:11:41:19.442 6082004 ACISPKT AA00000000
2024:049:11:41:23.442 6082020 ACISPKT AA00000000
2024:049:11:41:27.442 6082036 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:049:11:41:51.442 6082129 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:049:11:42:54.442 6082375 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:11:42:58.442 6082391 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29277
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29277,OORMPEN,CSELFMT2,ENAB)
2024:049:11:43:02.442 6082406 ACISPKT RS_0000001
2024:049:11:43:06.442 6082422 ACISPKT RH_0000001
2024:049:12:45:01.285 REAL-TIME COMM ENDS 2024:049:07:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:049:14:50:16.442 6126246 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:049:14:50:16.442 6126246 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:049:14:52:15.842 6126712 SIMFOCUS -418
2024:049:14:53:16.442 6126949 MP_OBSID 29261
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29261:
Target Name: SDSSJ093756.18+104808.2 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:049:14:53:35.242 6127022 SIMFOCUS -468
2024:049:15:11:27.156 6131205 ACISPKT AA00000000
2024:049:15:11:31.156 6131221 ACISPKT AA00000000
2024:049:15:11:35.156 6131237 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:049:15:11:59.156 6131330 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:049:15:13:02.156 6131576 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:15:13:06.156 6131592 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29261
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29261,OORMPEN,CSELFMT2,ENAB)
2024:049:15:13:10.156 6131607 ACISPKT RS_0000001
2024:049:15:13:14.156 6131623 ACISPKT RH_0000001
2024:049:18:07:38.156 6172458 ACISPKT AA00000000
==> ACIS integration time of 9.50 ks.
This is 95.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:049:18:10:38.156 6173160 MP_OBSID 43688
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43688:
No ocat info found for obsid 43688
2024:049:18:35:53.484 6179074 MP_OBSID 29263
LATEST OCAT INFO FOR OBSID 29263:
Target Name: Swift J1728.9-3613 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 9.5 Remaining Exposure time: 9.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:049:18:35:53.484 6179074 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:049:18:37:52.884 6179540 SIMFOCUS -536
2024:049:18:48:48.046 6182097 ACISPKT AA00000000
2024:049:18:48:52.046 6182112 ACISPKT AA00000000
2024:049:18:48:56.046 6182128 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:049:18:49:20.046 6182221 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:049:18:50:23.046 6182467 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:18:50:27.046 6182483 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29263
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29263,OORMPEN,CSELFMT2,ENAB)
2024:049:18:50:31.046 6182499 ACISPKT RS_0000001
2024:049:18:50:35.046 6182514 ACISPKT RH_0000001
2024:049:19:35:01.285 REAL-TIME COMM BEGINS 2024:049:14:35:01.285 EST
2024:049:21:05:01.285 REAL-TIME COMM ENDS 2024:049:16:05:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:049:21:57:45.046 6226339 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 105.26% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:049:22:00:45.046 6227041 MP_OBSID 27415
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27415:
Target Name: NGC 2353 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:049:22:39:58.923 6236227 ACISPKT WSVIDALLDN
2024:049:22:40:16.923 6236297 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:049:22:41:19.923 6236543 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:049:22:41:23.923 6236559 ACISPKT RS_0000001
2024:049:22:41:27.923 6236574 ACISPKT RH_0000001
2024:049:22:41:50.923 6236664 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27415
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27415,OORMPEN,CSELFMT2,ENAB)
2024:050:02:35:17.923 6291325 ACISPKT AA00000000
==> ACIS integration time of 14.01 ks.
This is 93.38% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 15 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
58 39 39 36 36 97
**NOTE: There are 3 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 3 3
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. The radzone ACIS commanding triplet was not seen.
o. Time difference between a WSVIDALLDN command and the 2nd AA00000000 that precedes it is greater than 10 mins.
o. RADMON occured more than 3.25 minutes AFTER stop science.
o. There is a SIM translation that occurs DURING an ACIS science run.
o. The OBSID change to 27141 that occurs less than 3 mins after a stop science.
o. RadMon was disabled prior to radbelt transit but we were NOT at HRC-S yet.
o. The OBSID change to 27146 that occurs less than 3 mins after a stop science.
o. There is a change from FMT2 before an ACIS stop science.
o. The OBSID change to 28117 that occurs less than 3 mins after a stop science.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED