-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2024/JAN2624/oflsa/CR026_1409.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2024/JAN2624/oflsa/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (HRC-S,HETG-OUT,LETG-OUT,29211,OORMPDS,CSELFMT2,ENAB)
2024:026:14:31:52.403 15144228 ACISPKT AA00000000
ACISPKT AND/OR POWER COMMAND ERROR:
2024:026:14:31:55.40 ACISPKT Rule #0 - ERROR Less than 4 second delay between consecutive ACISPKT commands
2024:026:14:31:55.403 15144239 ACISPKT AA00000000
2024:026:14:32:58.403 15144485 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is
2024:026:14:33:54.403 15144704 COMMAND_SW OORMPEN
==> Exit leg pad time is 2298.83 ks.
>>>ERROR: RadMon EN occurs well after an E1 exit (>15ks).
-OR- RadMon EN encountered prior to a XE1RADZ0/XEF1000.
2024:026:14:35:07.403 15144989 MP_OBSID 43761
==> ObsID change occurs 3.2 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43761:
No ocat info found for obsid 43761
2024:026:14:37:23.950 15145521 AOENDITH AOENDITH
==> DITHER ENABLED
2024:026:14:57:26.000 15150212 COMMAND_HW CSELFMT6
2024:026:15:01:07.000 15151075 COMMAND_HW CSELFMT2
2024:026:15:33:53.950 15158751 MP_OBSID 43760
LATEST OCAT INFO FOR OBSID 43760:
No ocat info found for obsid 43760
2024:026:21:07:27.045 15236851 MP_OBSID 29222
LATEST OCAT INFO FOR OBSID 29222:
Target Name: SDSSJ085302.12+183259.5 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:21:07:27.045 15236851 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:026:21:23:10.713 15240533 ACISPKT AA00000000
2024:026:21:23:14.713 15240549 ACISPKT AA00000000
2024:026:21:23:18.713 15240564 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:026:21:23:42.713 15240658 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:026:21:24:45.713 15240904 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:21:24:49.713 15240920 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29222
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_0057A in OCAT.
Stored parameter block is WT0057A034. Requested is WT0057B034
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29222,OORMPEN,CSELFMT2,ENAB)
>>> Warning - Long Dwell: 2024:026:21:24:49.713 Dwell time: 216660.6 seconds
2024:026:21:24:53.713 15240935 ACISPKT RS_0000001
2024:026:21:24:57.713 15240951 ACISPKT RH_0000001
2024:027:00:20:01.285 REAL-TIME COMM BEGINS 2024:027:19:20:01.285 EST
2024:027:00:27:41.713 15283737 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:00:27:41.713 15283737 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:027:00:29:41.113 15284203 SIMFOCUS -536
2024:027:00:30:41.713 15284440 MP_OBSID 27043
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27043:
Target Name: NGC 6242 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:027:00:49:15.236 15288785 ACISPKT AA00000000
2024:027:00:49:19.236 15288801 ACISPKT AA00000000
2024:027:00:49:23.236 15288816 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:00:49:47.236 15288910 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:027:00:50:50.236 15289156 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:00:50:54.236 15289171 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27043
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27043,OORMPEN,CSELFMT2,ENAB)
2024:027:00:50:58.236 15289187 ACISPKT RS_0000001
2024:027:00:51:02.236 15289203 ACISPKT RH_0000001
2024:027:01:50:01.285 REAL-TIME COMM ENDS 2024:26:20:50:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:027:04:31:32.236 15340832 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:04:31:32.236 15340832 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:027:04:33:31.636 15341298 SIMFOCUS -418
2024:027:04:34:32.236 15341534 MP_OBSID 29210
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29210:
Target Name: SDSSJ085302.12+183259.5 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:027:04:34:51.036 15341608 SIMFOCUS -468
2024:027:04:57:24.418 15346889 ACISPKT AA00000000
2024:027:04:57:28.418 15346905 ACISPKT AA00000000
2024:027:04:57:32.418 15346920 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:04:57:56.418 15347014 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:027:04:58:59.418 15347260 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:04:59:03.418 15347276 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29210
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29210,OORMPEN,CSELFMT2,ENAB)
2024:027:04:59:07.418 15347291 ACISPKT RS_0000001
2024:027:04:59:11.418 15347307 ACISPKT RH_0000001
2024:027:08:18:35.418 15393996 ACISPKT AA00000000
==> ACIS integration time of 11.00 ks.
This is 110.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:08:21:35.418 15394698 MP_OBSID 28183
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28183:
Target Name: PGC538542 SI Mode: TE_007E2
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNYY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:027:08:32:02.844 15397146 ACISPKT AA00000000
2024:027:08:32:06.844 15397162 ACISPKT AA00000000
2024:027:08:32:10.844 15397178 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:08:32:34.844 15397271 ACISPKT WSPOW1EC3F
==> WSPOW COMMAND LOADS: All Feps; I2 I3 S1 S2 S3 S4
2024:027:08:33:37.844 15397517 ACISPKT WT007E2024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007e2024
fepCcdSelect = 2 7 5 6 3 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:08:33:41.844 15397533 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28183
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007E2B is WT007E2024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28183,OORMPEN,CSELFMT2,ENAB)
2024:027:08:33:45.844 15397548 ACISPKT RS_0000001
2024:027:08:33:49.844 15397564 ACISPKT RH_0000001
2024:027:10:27:34.718 15424198 ACISPKT AA00000000
==> ACIS integration time of 5.43 ks.
This is 108.64% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:10:27:34.718 15424198 SIMTRANS -99616 (HRC-S)
2024:027:10:30:34.718 15424900 COMMAND_HW CSELFMT6
2024:027:10:30:34.718 15424900 MP_OBSID 43759
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43759:
No ocat info found for obsid 43759
2024:027:10:31:09.057 15425034 COMMAND_SW 4OHETGIN
2024:027:10:33:12.118 15425514 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2024:027:10:33:12.118 15425514 ACISPKT AA00000000
2024:027:10:33:16.118 15425530 ACISPKT AA00000000
2024:027:10:33:20.118 15425546 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:10:33:44.118 15425639 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2024:027:10:34:47.118 15425885 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:027:10:34:51.118 15425901 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43759
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43759,OORMPDS,CSELFMT6,ENAB)
2024:027:10:34:52.518 15425906 COMMAND_HW CSELFMT2
2024:027:10:34:55.118 15425916 ACISPKT RS_0000001
2024:027:10:34:59.118 15425932 ACISPKT RH_0000001
2024:027:11:19:46.831 15436421 MP_OBSID 43758
==> ObsID change occurs 46.5 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43758:
No ocat info found for obsid 43758
2024:027:12:29:52.696 15452834 MP_OBSID 43757
LATEST OCAT INFO FOR OBSID 43757:
No ocat info found for obsid 43757
2024:027:13:13:19.363 15463006 ACISPKT AA00000000
==> ACIS integration time of 8.11 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:027:13:16:19.363 15463708 ACISPKT AA00000000
2024:027:13:16:19.363 15463708 ORBPOINT EEF1000
==> Entry leg pad time is 9.79 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 027:13:16:19
from CRM file: EE1RADZ0 = 027:13:16:19
==> CRM Pad Time: 9.787 ks and Backstop Pad Time: 9.79 ks agree.
2024:027:13:16:28.363 15463744 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:027:13:17:31.363 15463989 ACISPKT RS_0000001
2024:027:15:40:01.542 REAL-TIME COMM BEGINS 2024:027:10:40:01.542 EST
2024:027:15:57:39.240 15501484 MP_OBSID 43756
LATEST OCAT INFO FOR OBSID 43756:
No ocat info found for obsid 43756
2024:027:16:47:00.000 15513038 MP_OBSID 43755
LATEST OCAT INFO FOR OBSID 43755:
No ocat info found for obsid 43755
2024:027:17:10:01.542 REAL-TIME COMM ENDS 2024:027:12:10:01.542 EST
==> COMM DURATION: 90.00 mins.
2024:027:17:12:22.610 15518772 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2024:027:17:35:30.000 15524394 MP_OBSID 43754
LATEST OCAT INFO FOR OBSID 43754:
No ocat info found for obsid 43754
2024:027:17:59:41.000 15530056 MP_OBSID 43753
LATEST OCAT INFO FOR OBSID 43753:
No ocat info found for obsid 43753
2024:027:18:25:01.542 REAL-TIME COMM BEGINS 2024:027:13:25:01.542 EST
2024:027:19:55:01.542 REAL-TIME COMM ENDS 2024:027:14:55:01.542 EST
==> COMM DURATION: 90.00 mins.
2024:027:20:01:22.208 15558549 MP_OBSID 43752
LATEST OCAT INFO FOR OBSID 43752:
No ocat info found for obsid 43752
2024:027:20:28:19.363 15564860 ACISPKT RBTXINGBLL
2024:027:20:38:19.363 15567201 ACISPKT AA00000000
2024:027:20:38:19.363 15567201 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2024:027:20:38:23.363 15567217 ACISPKT AA00000000
2024:027:20:38:27.363 15567232 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:20:38:51.363 15567326 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:027:20:39:54.363 15567572 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:027:20:39:58.363 15567587 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43752
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43752,OORMPDS,CSELFMT2,ENAB)
2024:027:20:40:02.363 15567603 ACISPKT RS_0000001
2024:027:20:40:06.363 15567619 ACISPKT RH_0000001
2024:027:21:25:47.615 15578316 MP_OBSID 43751
==> ObsID change occurs 47.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43751:
No ocat info found for obsid 43751
2024:027:23:18:27.173 15604695 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:027:23:19:01.512 15604829 COMMAND_SW 4OHETGRE
2024:027:23:21:59.363 15605523 ACISPKT AA00000000
==> ACIS integration time of 0.18 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:027:23:22:44.973 15605701 COMMAND_HW CSELFMT2
2024:027:23:24:58.363 15606222 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 027:20:38:19
from CRM file: XE1RADZ0 = 027:20:38:19
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:027:23:24:59.363 15606226 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:027:23:24:59.363 15606226 ACISPKT AA00000000
2024:027:23:25:00.363 15606229 MP_OBSID 28044
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 28044:
Target Name: 1eRASS J110059.9-434027 SI Mode: TE_00958
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:027:23:25:03.363 15606241 ACISPKT AA00000000
2024:027:23:25:07.363 15606257 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:23:25:31.363 15606350 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2024:027:23:26:34.363 15606596 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:23:26:38.363 15606612 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28044
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28044,OORMPEN,CSELFMT2,ENAB)
2024:027:23:26:42.363 15606627 ACISPKT RS_0000001
2024:027:23:26:46.363 15606643 ACISPKT RH_0000001
2024:028:03:30:01.285 REAL-TIME COMM BEGINS 2024:27:22:30:01.285 EST
2024:028:05:00:01.285 REAL-TIME COMM ENDS 2024:028:00:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:028:05:53:56.363 15697297 ACISPKT AA00000000
==> ACIS integration time of 22.00 ks.
This is 110.00% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:05:53:56.363 15697297 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:028:05:55:55.763 15697763 SIMFOCUS -536
2024:028:05:56:56.363 15697999 MP_OBSID 27148
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27148:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:06:04:22.986 15699742 ACISPKT AA00000000
2024:028:06:04:26.986 15699758 ACISPKT AA00000000
2024:028:06:04:30.986 15699773 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:028:06:04:54.986 15699867 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:06:05:57.986 15700113 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:06:06:01.986 15700128 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27148
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27148,OORMPEN,CSELFMT2,ENAB)
2024:028:06:06:05.986 15700144 ACISPKT RS_0000001
2024:028:06:06:09.986 15700160 ACISPKT RH_0000001
2024:028:09:13:19.986 15743984 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:09:16:19.986 15744686 MP_OBSID 27073
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27073:
Target Name: LMC Deep Field 05 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:09:45:16.853 15751464 ACISPKT WSVIDALLDN
2024:028:09:45:34.853 15751535 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:09:46:37.853 15751781 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:09:46:41.853 15751796 ACISPKT RS_0000001
2024:028:09:46:45.853 15751812 ACISPKT RH_0000001
2024:028:09:47:08.853 15751902 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27073
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27073,OORMPEN,CSELFMT2,ENAB)
2024:028:13:30:01.285 REAL-TIME COMM BEGINS 2024:028:08:30:01.285 EST
2024:028:13:57:15.853 15810465 ACISPKT AA00000000
==> ACIS integration time of 15.01 ks.
This is 100.05% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:14:00:15.853 15811168 MP_OBSID 29216
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29216:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:14:29:13.589 15817949 ACISPKT WSVIDALLDN
2024:028:14:29:31.589 15818020 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:14:30:34.589 15818265 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:14:30:38.589 15818281 ACISPKT RS_0000001
2024:028:14:30:42.589 15818297 ACISPKT RH_0000001
2024:028:14:31:05.589 15818386 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29216
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29216,OORMPEN,CSELFMT2,ENAB)
2024:028:15:00:01.285 REAL-TIME COMM ENDS 2024:028:10:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:028:17:17:52.589 15857438 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:17:17:52.589 15857438 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:028:17:19:51.989 15857904 SIMFOCUS -418
2024:028:17:20:52.589 15858141 MP_OBSID 29072
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29072:
Target Name: NGC 1068 SI Mode: TE_00D76
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: CUSTOM Start: 440 Rows: 146 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.002222 deg Z Freq: 0.360000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:17:21:11.389 15858214 SIMFOCUS -468
2024:028:17:44:00.590 15863557 ACISPKT AA00000000
2024:028:17:44:04.590 15863573 ACISPKT AA00000000
2024:028:17:44:08.590 15863588 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:028:17:44:32.590 15863682 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:028:17:45:01.285 REAL-TIME COMM BEGINS 2024:028:12:45:01.285 EST
2024:028:17:45:35.590 15863928 ACISPKT WT00D76014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00d76014
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 439
subarrayRowCount = 145
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:17:45:39.590 15863943 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29072
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00D76B is WT00D76014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29072,OORMPEN,CSELFMT2,ENAB)
2024:028:17:45:43.590 15863959 ACISPKT RS_0000001
2024:028:17:45:47.590 15863975 ACISPKT RH_0000001
2024:028:17:50:12.590 15865009 AOENDITH AOENDITH
==> DITHER ENABLED
2024:028:19:15:01.285 REAL-TIME COMM ENDS 2024:028:14:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:028:20:43:22.590 15905555 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:20:43:22.590 15905555 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:028:20:45:21.990 15906021 SIMFOCUS -536
2024:028:20:46:22.590 15906258 MP_OBSID 29217
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29217:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:20:59:55.589 15909430 ACISPKT AA00000000
2024:028:20:59:59.589 15909446 ACISPKT AA00000000
2024:028:21:00:03.589 15909462 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:028:21:00:27.589 15909555 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:21:01:30.589 15909801 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:21:01:34.589 15909817 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29217
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29217,OORMPEN,CSELFMT2,ENAB)
2024:028:21:01:38.589 15909832 ACISPKT RS_0000001
2024:028:21:01:42.589 15909848 ACISPKT RH_0000001
2024:028:21:15:42.589 15913126 AOENDITH AOENDITH
==> DITHER ENABLED
2024:029:00:08:52.589 15953672 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 6 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
21 13 13 12 12 35
**NOTE: There are 1 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 1 1
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. Either Radmon was NOT ENABLED at least 15 ks after an electron 1 exit.
-OR- Radmon was NOT enabled after electron 1 exit.
o. The parameter block stored does not match the SI_mode.
o. RadMon was disabled prior to radbelt transit but we were NOT at HRC-S yet.
o. There is a change from FMT2 before an ACIS stop science.
o. The OBSID change to 28044 that occurs less than 3 mins after a stop science.
o. The parameter block was incorrect for obsid(s)
- 29222
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED