-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2024/OCT3024/oflsa/CR304_0105.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2024/OCT3024/oflsa/ACIS-History_edit.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (ACIS-S,HETG-IN,LETG-OUT,30595,OORMPEN,CSELFMT2,ENAB)
2024:304:01:35:00.000 8032487 ACISPKT AA00000000
ACISPKT AND/OR POWER COMMAND ERROR:
2024:304:01:35:03.00 ACISPKT Rule #0 - ERROR Less than 4 second delay between consecutive ACISPKT commands
2024:304:01:35:03.000 8032499 ACISPKT AA00000000
2024:304:01:36:06.000 8032744 COMMAND_SW OORMPDS
>>> ERROR: ABOUT TO ENTER THE BELTS! NO SIM TRANSLATION YET!
FOCAL PLANE INSTRUMENT is ACIS-S
==>The requested SI_MODE for the inbound CTI is
2024:304:01:37:02.000 8032963 COMMAND_SW OORMPEN
==> Exit leg pad time is 26271.42 ks.
>>>ERROR: RadMon EN occurs well after an E1 exit (>15ks).
-OR- RadMon EN encountered prior to a XE1RADZ0/XEF1000.
2024:304:01:46:10.878 8035105 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:304:01:46:25.878 8035164 MP_OBSID 28659
==> ObsID change occurs 11.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28659:
Target Name: Mrk 34 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 24 Remaining Exposure time: 24
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:304:01:51:48.278 8036422 SIMFOCUS -418
2024:304:01:53:07.678 8036732 SIMFOCUS -468
2024:304:02:05:34.151 8039645 ACISPKT AA00000000
2024:304:02:05:38.151 8039660 ACISPKT AA00000000
2024:304:02:05:42.151 8039676 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:304:02:06:06.151 8039769 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:304:02:07:09.151 8040015 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
>>> Warning - Long Dwell: 2024:304:02:07:13.151 Dwell time: 117856.9 seconds
2024:304:02:07:13.151 8040031 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28659
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
>>>ERROR: Problem with Instrument configuration
Please check the following errors
- Requested Grating is NOT inserted.
Requested:NONE Actual:HETG
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,28659,OORMPEN,CSELFMT2,ENAB)
2024:304:02:07:17.151 8040047 ACISPKT RS_0000001
2024:304:02:07:21.151 8040062 ACISPKT RH_0000001
2024:304:09:03:25.151 8137483 ACISPKT AA00000000
==> ACIS integration time of 24.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:304:09:03:25.151 8137483 SIMTRANS 73176 (ACIS-S)
==> THERE IS A Z-SIM OF -6.16 mm FOR THIS OBSERVATION.
2024:304:09:06:25.151 8138185 COMMAND_HW CSELFMT6
2024:304:09:06:25.151 8138185 MP_OBSID 30596
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30596:
Target Name: M33 X-8 SI Mode: TE_00B8E
Instrument: ACIS-S Grating: HETG Type: GTO
Exposure Time: 22 Remaining Exposure time: 22
Offset: Y: 0 Z: 0 Z-sim: -6.14
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: CUSTOM Start: 1 Rows: 512 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:304:09:06:59.490 8138319 COMMAND_SW 4OHETGIN
2024:304:09:10:42.951 8139191 COMMAND_HW CSELFMT2
2024:304:09:24:46.177 8142482 ACISPKT AA00000000
2024:304:09:24:50.177 8142497 ACISPKT AA00000000
2024:304:09:24:54.177 8142513 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:304:09:25:18.177 8142607 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2024:304:09:26:21.177 8142852 ACISPKT WT00B8E014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b8e014
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 511
primaryExposure = 16
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:304:09:26:25.177 8142868 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30596
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B8EB is WT00B8E014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,30596,OORMPEN,CSELFMT2,ENAB)
2024:304:09:26:29.177 8142884 ACISPKT RS_0000001
2024:304:09:26:33.177 8142899 ACISPKT RH_0000001
2024:304:15:48:28.177 8232324 ACISPKT AA00000000
==> ACIS integration time of 22.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:304:15:48:28.177 8232324 SIMTRANS -50504 (HRC-I)
2024:304:15:51:28.177 8233026 COMMAND_HW CSELFMT6
2024:304:15:51:28.177 8233026 MP_OBSID 28738
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28738:
No ACIS info found for obsid 28738.
This is an HRC-I observation.
2024:304:15:51:28.177 8233026 ACISPKT AA00000000
2024:304:15:51:32.177 8233042 ACISPKT AA00000000
2024:304:15:51:36.177 8233057 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:304:15:52:00.177 8233151 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2024:304:15:52:02.516 8233160 COMMAND_SW 4OHETGRE
2024:304:15:52:54.577 8233363 SIMFOCUS -716
2024:304:15:53:03.177 8233397 ACISPKT RS_0000001
2024:304:15:53:07.177 8233412 ACISPKT RH_0000001
2024:304:15:53:30.177 8233502 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2024:304:15:53:34.177 8233518 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2024:304:15:53:38.177 8233533 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,28738,OORMPEN,CSELFMT6,ENAB)
2024:304:15:55:45.977 8234032 COMMAND_HW CSELFMT1
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:304:16:24:13.007 8240694 AOENDITH AOENDITH
==> DITHER ENABLED
2024:304:16:25:59.177 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2024:304:17:55:01.285 REAL-TIME COMM BEGINS 2024:304:13:55:01.285 EDT
2024:304:19:25:01.285 REAL-TIME COMM ENDS 2024:304:15:25:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:304:20:25:49.177 8297264 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 272.18 minutes AFTER A START SCIENCE.
2024:304:20:26:01.177 8297311 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:304:20:26:01.177 215PCAOF command: HRC Observation Ends
2024:304:20:26:03.177 8297319 COMMAND_HW CSELFMT2
2024:304:20:26:03.177 8297319 MP_OBSID 29752
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29752:
Target Name: 1eRASS J013811.8-253814 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 1.5 Remaining Exposure time: 1.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2024:304:20:30:18.577 8298316 SIMFOCUS -418
2024:304:20:31:40.977 8298637 SIMFOCUS -468
2024:304:20:42:50.930 8301252 ACISPKT AA00000000
2024:304:20:42:54.930 8301267 ACISPKT AA00000000
2024:304:20:42:58.930 8301283 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:304:20:43:22.930 8301376 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2024:304:20:44:25.930 8301622 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:304:20:44:29.930 8301638 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29752
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29752,OORMPEN,CSELFMT2,ENAB)
2024:304:20:44:33.930 8301653 ACISPKT RS_0000001
2024:304:20:44:37.930 8301669 ACISPKT RH_0000001
2024:304:20:57:13.930 8304619 AOENDITH AOENDITH
==> DITHER ENABLED
2024:304:21:28:43.930 8311995 ACISPKT AA00000000
==> ACIS integration time of 1.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:304:21:28:43.930 8311995 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:304:21:30:43.330 8312461 SIMFOCUS -536
2024:304:21:31:43.930 8312697 MP_OBSID 28594
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28594:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 12.5 Remaining Exposure time: 12.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:304:21:31:47.082 8312710 ACISPKT AA00000000
2024:304:21:31:51.082 8312725 ACISPKT AA00000000
2024:304:21:31:55.082 8312741 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:304:21:32:19.082 8312835 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:304:21:33:22.082 8313080 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:304:21:33:26.082 8313096 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28594
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,28594,OORMPEN,CSELFMT2,ENAB)
2024:304:21:33:30.082 8313112 ACISPKT RS_0000001
2024:304:21:33:34.082 8313127 ACISPKT RH_0000001
2024:305:01:10:26.994 8363909 ACISPKT AA00000000
==> ACIS integration time of 11.78 ks.
This is 94.26% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:305:01:10:26.994 8363909 SIMTRANS -99616 (HRC-S)
2024:305:01:13:26.994 8364612 COMMAND_HW CSELFMT6
2024:305:01:13:26.994 8364612 MP_OBSID 43018
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43018:
No ocat info found for obsid 43018
2024:305:01:14:01.333 8364746 COMMAND_SW 4OHETGIN
2024:305:01:16:27.394 8365316 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2024:305:01:16:27.394 8365316 ACISPKT AA00000000
2024:305:01:16:31.394 8365331 ACISPKT AA00000000
2024:305:01:16:35.394 8365347 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:305:01:16:59.394 8365441 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:305:01:17:44.794 8365618 COMMAND_HW CSELFMT2
2024:305:01:18:02.394 8365686 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:305:01:18:06.394 8365702 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43018
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43018,OORMPDS,CSELFMT2,ENAB)
2024:305:01:18:10.394 8365718 ACISPKT RS_0000001
2024:305:01:18:14.394 8365733 ACISPKT RH_0000001
2024:305:02:30:01.285 REAL-TIME COMM BEGINS 2024:304:22:30:01.285 EDT
2024:305:02:54:53.229 8388363 MP_OBSID 43017
==> ObsID change occurs 98.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43017:
No ocat info found for obsid 43017
2024:305:04:00:01.285 REAL-TIME COMM ENDS 2024:305:00:00:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:305:04:00:07.394 8403638 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:305:04:03:07.394 8404340 ACISPKT AA00000000
2024:305:04:03:07.394 8404340 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 305:04:03:07
from CRM file: EE1RADZ0 = 305:04:03:07
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:305:04:03:16.394 8404375 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:305:04:04:19.394 8404621 ACISPKT RS_0000001
2024:305:04:24:01.752 8409235 MP_OBSID 43016
==> ObsID change occurs 20.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43016:
No ocat info found for obsid 43016
2024:305:07:53:48.491 8458354 MP_OBSID 43015
LATEST OCAT INFO FOR OBSID 43015:
No ocat info found for obsid 43015
2024:305:08:43:58.184 8470099 MP_OBSID 43014
LATEST OCAT INFO FOR OBSID 43014:
No ocat info found for obsid 43014
2024:305:08:50:20.776 8471446 ORBPOINT EPERIGEE
2024:305:09:17:51.854 8478036 MP_OBSID 43013
LATEST OCAT INFO FOR OBSID 43013:
No ocat info found for obsid 43013
2024:305:10:16:40.000 8491804 MP_OBSID 43012
LATEST OCAT INFO FOR OBSID 43012:
No ocat info found for obsid 43012
2024:305:11:15:07.394 8505491 ACISPKT RBTXINGBLL
2024:305:11:25:07.394 8507833 ACISPKT AA00000000
2024:305:11:25:07.394 8507833 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2024:305:11:25:11.394 8507848 ACISPKT AA00000000
2024:305:11:25:15.394 8507864 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:305:11:25:39.394 8507958 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2024:305:11:26:42.394 8508204 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:305:11:26:46.394 8508219 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43012
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43012,OORMPDS,CSELFMT2,ENAB)
2024:305:11:26:50.394 8508235 ACISPKT RS_0000001
2024:305:11:26:54.394 8508250 ACISPKT RH_0000001
2024:305:13:55:25.338 8543025 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:305:13:55:59.677 8543159 COMMAND_SW 4OHETGRE
2024:305:13:59:43.138 8544031 COMMAND_HW CSELFMT2
2024:305:14:08:47.394 8546155 ACISPKT AA00000000
==> ACIS integration time of 0.77 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:305:14:11:46.394 8546853 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 305:11:25:07
from CRM file: XE1RADZ0 = 305:11:25:07
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:305:14:11:47.394 8546857 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:305:14:11:47.394 8546857 ACISPKT AA00000000
2024:305:14:11:48.394 8546861 MP_OBSID 28036
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 28036:
Target Name: LMC 2273 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 50 Remaining Exposure time: 50
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:305:14:11:51.394 8546873 ACISPKT AA00000000
2024:305:14:11:55.394 8546888 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:305:14:12:19.394 8546982 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2024:305:14:13:22.394 8547228 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:305:14:13:26.394 8547244 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28036
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28036,OORMPEN,CSELFMT2,ENAB)
2024:305:14:13:30.394 8547259 ACISPKT RS_0000001
2024:305:14:13:34.394 8547275 ACISPKT RH_0000001
2024:305:14:17:24.794 8548174 SIMFOCUS -418
2024:305:14:18:44.194 8548484 SIMFOCUS -468
2024:305:17:10:01.285 REAL-TIME COMM BEGINS 2024:305:13:10:01.285 EDT
2024:305:18:40:01.285 REAL-TIME COMM ENDS 2024:305:14:40:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:306:00:15:01.285 REAL-TIME COMM BEGINS 2024:306:20:15:01.285 EDT
2024:306:01:45:01.285 REAL-TIME COMM ENDS 2024:305:21:45:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:306:05:00:44.394 8755002 ACISPKT AA00000000
==> ACIS integration time of 52.00 ks.
This is 104.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:306:05:00:44.394 8755002 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:306:05:02:43.794 8755468 SIMFOCUS -536
2024:306:05:03:44.394 8755704 MP_OBSID 28595
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28595:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 18.5 Remaining Exposure time: 18.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:306:05:09:57.520 8757160 ACISPKT AA00000000
2024:306:05:10:01.520 8757176 ACISPKT AA00000000
2024:306:05:10:05.520 8757191 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:306:05:10:29.520 8757285 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:306:05:11:32.520 8757531 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:306:05:11:36.520 8757546 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28595
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,28595,OORMPEN,CSELFMT2,ENAB)
2024:306:05:11:40.520 8757562 ACISPKT RS_0000001
2024:306:05:11:44.520 8757578 ACISPKT RH_0000001
2024:306:10:15:34.520 8828719 ACISPKT AA00000000
==> ACIS integration time of 17.00 ks.
This is 91.89% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:306:10:15:34.520 8828719 SIMTRANS -50504 (HRC-I)
2024:306:10:18:34.520 8829422 COMMAND_HW CSELFMT1
2024:306:10:18:34.520 8829422 MP_OBSID 28346
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28346:
No ACIS info found for obsid 28346.
This is an HRC-I observation.
2024:306:10:18:34.520 8829422 ACISPKT AA00000000
2024:306:10:18:38.520 8829437 ACISPKT AA00000000
2024:306:10:18:42.520 8829453 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:306:10:19:06.520 8829546 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2024:306:10:20:09.520 8829792 ACISPKT RS_0000001
2024:306:10:20:13.520 8829808 ACISPKT RH_0000001
2024:306:10:20:27.920 8829864 SIMFOCUS -716
2024:306:10:20:36.520 8829898 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2024:306:10:20:40.520 8829913 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2024:306:10:20:44.520 8829929 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,28346,OORMPEN,CSELFMT1,ENAB)
2024:306:10:41:25.768 8834773 AOENDITH AOENDITH
==> DITHER ENABLED
2024:306:10:53:05.520 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2024:306:12:25:01.285 REAL-TIME COMM BEGINS 2024:306:08:25:01.285 EDT
2024:306:13:50:01.285 REAL-TIME COMM ENDS 2024:306:09:50:01.285 EDT
==> COMM DURATION: 85.00 mins.
2024:306:14:59:39.520 8895236 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 278.92 minutes AFTER A START SCIENCE.
2024:306:14:59:51.520 215PCAOF command: HRC Observation Ends
2024:306:14:59:51.520 8895283 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:306:14:59:53.520 8895291 COMMAND_HW CSELFMT2
2024:306:14:59:53.520 8895291 MP_OBSID 28601
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 28601:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 11 Remaining Exposure time: 11
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:306:15:04:32.920 8896381 SIMFOCUS -486
2024:306:15:05:54.320 8896699 SIMFOCUS -536
2024:306:15:09:14.787 8897481 ACISPKT AA00000000
2024:306:15:09:18.787 8897497 ACISPKT AA00000000
2024:306:15:09:22.787 8897512 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:306:15:09:46.787 8897606 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:306:15:10:49.787 8897852 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:306:15:10:53.787 8897868 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28601
---------------------------------------------------------------------------
>>>ERROR: Parameter block stored does not match SI_MODE:TE_006E6 in OCAT.
Stored parameter block is WT006E6034. Requested is WT006E7034
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,28601,OORMPEN,CSELFMT2,ENAB)
2024:306:15:10:57.787 8897883 ACISPKT RS_0000001
2024:306:15:11:01.787 8897899 ACISPKT RH_0000001
2024:306:15:25:01.787 8901177 AOENDITH AOENDITH
==> DITHER ENABLED
2024:306:16:34:05.523 8903409 ORBPOINT EAPOGEE
2024:306:17:50:01.285 REAL-TIME COMM BEGINS 2024:306:13:50:01.285 EDT
2024:306:18:31:31.787 8944845 ACISPKT AA00000000
==> ACIS integration time of 10.80 ks.
This is 98.18% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:306:18:31:31.787 8944845 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:306:18:33:31.187 8945311 SIMFOCUS -418
2024:306:18:34:31.787 8945547 MP_OBSID 28270
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28270:
Target Name: SDSS J090920.44+004419.4 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 14.2 Remaining Exposure time: 14.2
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:306:18:34:50.587 8945621 SIMFOCUS -468
2024:306:18:54:26.225 8950209 ACISPKT AA00000000
2024:306:18:54:30.225 8950224 ACISPKT AA00000000
2024:306:18:54:34.225 8950240 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:306:18:54:58.225 8950334 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:306:18:56:01.225 8950579 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:306:18:56:05.225 8950595 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28270
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28270,OORMPEN,CSELFMT2,ENAB)
2024:306:18:56:09.225 8950611 ACISPKT RS_0000001
2024:306:18:56:13.225 8950626 ACISPKT RH_0000001
2024:306:19:20:01.285 REAL-TIME COMM ENDS 2024:306:15:20:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:306:23:25:37.225 9013705 ACISPKT AA00000000
==> ACIS integration time of 15.20 ks.
This is 107.04% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:306:23:25:37.225 9013705 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:306:23:27:36.625 9014171 SIMFOCUS -536
2024:306:23:28:37.225 9014408 MP_OBSID 30592
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30592:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 15.5 Remaining Exposure time: 15.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:306:23:44:11.576 9018054 ACISPKT AA00000000
2024:306:23:44:15.576 9018070 ACISPKT AA00000000
2024:306:23:44:19.576 9018085 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:306:23:44:43.576 9018179 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:306:23:45:46.576 9018425 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:306:23:45:50.576 9018440 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30592
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30592,OORMPEN,CSELFMT2,ENAB)
2024:306:23:45:54.576 9018456 ACISPKT RS_0000001
2024:306:23:45:58.576 9018472 ACISPKT RH_0000001
2024:307:02:15:01.285 REAL-TIME COMM BEGINS 2024:306:22:15:01.285 EDT
2024:307:03:45:01.285 REAL-TIME COMM ENDS 2024:306:23:45:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:307:04:08:08.576 9079857 ACISPKT AA00000000
==> ACIS integration time of 14.50 ks.
This is 93.55% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:307:04:08:08.576 9079857 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:307:04:10:07.976 9080323 SIMFOCUS -418
2024:307:04:11:08.576 9080559 MP_OBSID 28269
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28269:
Target Name: SDSS J085711.68+012435.0 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 13.6 Remaining Exposure time: 13.6
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:307:04:11:27.376 9080633 SIMFOCUS -468
2024:307:04:26:18.226 9084109 ACISPKT AA00000000
2024:307:04:26:22.226 9084125 ACISPKT AA00000000
2024:307:04:26:26.226 9084140 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:307:04:26:50.226 9084234 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2024:307:04:27:53.226 9084480 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:307:04:27:57.226 9084496 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28269
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28269,OORMPEN,CSELFMT2,ENAB)
2024:307:04:28:01.226 9084511 ACISPKT RS_0000001
2024:307:04:28:05.226 9084527 ACISPKT RH_0000001
2024:307:08:51:55.226 9146302 ACISPKT AA00000000
==> ACIS integration time of 14.60 ks.
This is 107.35% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:307:08:54:55.226 9147005 MP_OBSID 30591
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30591:
Target Name: Mrk 34 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 26.6 Remaining Exposure time: 26.6
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:307:09:19:55.376 9152859 ACISPKT WSVIDALLDN
2024:307:09:20:13.376 9152929 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2024:307:09:21:16.376 9153175 ACISPKT WT006C9034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c9034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:307:09:21:20.376 9153191 ACISPKT RS_0000001
2024:307:09:21:24.376 9153206 ACISPKT RH_0000001
2024:307:09:21:47.376 9153296 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30591
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8 is WT006C9034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30591,OORMPEN,CSELFMT2,ENAB)
2024:307:16:45:00.288 9257073 ACISPKT AA00000000
==> ACIS integration time of 26.59 ks.
This is 99.97% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:307:16:45:00.288 9257073 SIMTRANS -99616 (HRC-S)
2024:307:16:48:00.288 9257776 COMMAND_HW CSELFMT6
2024:307:16:48:00.288 9257776 MP_OBSID 43011
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43011:
No ocat info found for obsid 43011
2024:307:16:48:34.627 9257910 COMMAND_SW 4OHETGIN
2024:307:16:50:37.688 9258390 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2024:307:16:50:37.688 9258390 ACISPKT AA00000000
2024:307:16:50:41.688 9258406 ACISPKT AA00000000
2024:307:16:50:45.688 9258421 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:307:16:51:09.688 9258515 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2024:307:16:52:12.688 9258761 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:307:16:52:16.688 9258776 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43011
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43011,OORMPDS,CSELFMT6,ENAB)
2024:307:16:52:18.088 9258782 COMMAND_HW CSELFMT2
2024:307:16:52:20.688 9258792 ACISPKT RS_0000001
2024:307:16:52:24.688 9258808 ACISPKT RH_0000001
2024:307:17:45:01.285 REAL-TIME COMM BEGINS 2024:307:13:45:01.285 EDT
2024:307:19:15:01.285 REAL-TIME COMM ENDS 2024:307:15:15:01.285 EDT
==> COMM DURATION: 90.00 mins.
2024:307:19:34:17.688 9296712 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:307:19:37:17.688 9297414 ACISPKT AA00000000
2024:307:19:37:17.688 9297414 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 307:19:37:17
from CRM file: EE1RADZ0 = 307:19:37:17
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:307:19:37:26.688 9297450 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:307:19:38:29.688 9297695 ACISPKT RS_0000001
2024:307:21:55:17.502 9329726 MP_OBSID 43010
LATEST OCAT INFO FOR OBSID 43010:
No ocat info found for obsid 43010
2024:308:00:10:33.090 9361396 MP_OBSID 43009
LATEST OCAT INFO FOR OBSID 43009:
No ocat info found for obsid 43009
2024:308:00:17:34.161 9361440 ORBPOINT EPERIGEE
2024:308:00:49:46.335 9370580 MP_OBSID 43008
LATEST OCAT INFO FOR OBSID 43008:
No ocat info found for obsid 43008
2024:308:01:44:40.000 9383433 MP_OBSID 43007
LATEST OCAT INFO FOR OBSID 43007:
No ocat info found for obsid 43007
2024:308:03:13:17.847 9404186 MP_OBSID 43006
LATEST OCAT INFO FOR OBSID 43006:
No ocat info found for obsid 43006
2024:308:03:15:17.688 9404653 ACISPKT RBTXINGBLL
2024:308:03:25:17.688 9406995 ACISPKT AA00000000
2024:308:03:25:17.688 9406995 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2024:308:03:25:21.688 9407010 ACISPKT AA00000000
2024:308:03:25:25.688 9407026 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:308:03:25:49.688 9407120 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:308:03:26:52.688 9407366 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:308:03:26:56.688 9407381 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43006
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43006,OORMPDS,CSELFMT2,ENAB)
2024:308:03:27:00.688 9407397 ACISPKT RS_0000001
2024:308:03:27:04.688 9407412 ACISPKT RH_0000001
2024:308:06:03:06.123 9443945 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:308:06:03:40.462 9444079 COMMAND_SW 4OHETGRE
2024:308:06:07:23.923 9444951 COMMAND_HW CSELFMT2
2024:308:06:08:57.688 9445317 ACISPKT AA00000000
==> ACIS integration time of 0.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:308:06:11:56.688 9446015 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 308:03:25:17
from CRM file: XE1RADZ0 = 308:03:25:17
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:308:06:11:57.688 9446019 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:308:06:11:57.688 9446019 ACISPKT AA00000000
2024:308:06:11:58.688 9446023 MP_OBSID 25549
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 25549:
Target Name: SDSS J122855.90+341436.9 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 3.6 Remaining Exposure time: 3.6
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.002222 deg Y Freq: 0.360000 deg/sec Y Phase: 0
Z Amp: 0.002222 deg Z Freq: 0.509100 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:308:06:12:01.688 9446035 ACISPKT AA00000000
2024:308:06:12:05.688 9446050 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:308:06:12:29.688 9446144 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2024:308:06:13:32.688 9446390 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:308:06:13:36.688 9446406 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 25549
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,25549,OORMPEN,CSELFMT2,ENAB)
2024:308:06:13:40.688 9446421 ACISPKT RS_0000001
2024:308:06:13:44.688 9446437 ACISPKT RH_0000001
2024:308:06:26:20.688 9449387 AOENDITH AOENDITH
==> DITHER ENABLED
2024:308:07:32:51.688 9464962 ACISPKT AA00000000
==> ACIS integration time of 3.60 ks.
This is 100.03% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:308:07:32:51.688 9464962 SIMTRANS -50504 (HRC-I)
2024:308:07:35:51.688 9465664 COMMAND_HW CSELFMT1
2024:308:07:35:51.688 9465664 MP_OBSID 28004
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28004:
No ACIS info found for obsid 28004.
This is an HRC-I observation.
2024:308:07:35:51.688 9465664 ACISPKT AA00000000
2024:308:07:35:55.688 9465680 ACISPKT AA00000000
2024:308:07:35:59.688 9465695 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:308:07:36:23.688 9465789 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2024:308:07:37:21.088 9466013 SIMFOCUS -716
2024:308:07:37:26.688 9466035 ACISPKT RS_0000001
2024:308:07:37:30.688 9466050 ACISPKT RH_0000001
2024:308:07:37:53.688 9466140 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2024:308:07:37:57.688 9466156 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2024:308:07:38:01.688 9466171 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,28004,OORMPEN,CSELFMT1,ENAB)
2024:308:08:04:11.998 9472300 AOENDITH AOENDITH
==> DITHER ENABLED
2024:308:08:10:22.688 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2024:308:10:40:01.285 REAL-TIME COMM BEGINS 2024:308:05:40:01.285 EST
2024:308:12:08:36.688 9529528 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 270.58 minutes AFTER A START SCIENCE.
2024:308:12:08:48.688 9529574 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:308:12:08:48.688 215PCAOF command: HRC Observation Ends
2024:308:12:08:50.688 9529582 COMMAND_HW CSELFMT2
2024:308:12:08:50.688 9529582 MP_OBSID 30593
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 30593:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 19.5 Remaining Exposure time: 19.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:308:12:10:01.285 REAL-TIME COMM ENDS 2024:308:07:10:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:308:12:13:30.088 9530673 SIMFOCUS -486
2024:308:12:14:51.488 9530990 SIMFOCUS -536
2024:308:12:19:38.377 9532110 ACISPKT AA00000000
2024:308:12:19:42.377 9532125 ACISPKT AA00000000
2024:308:12:19:46.377 9532141 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:308:12:20:10.377 9532235 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:308:12:21:13.377 9532480 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:308:12:21:17.377 9532496 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30593
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30593,OORMPEN,CSELFMT2,ENAB)
2024:308:12:21:21.377 9532512 ACISPKT RS_0000001
2024:308:12:21:25.377 9532527 ACISPKT RH_0000001
2024:308:12:35:25.377 9535805 AOENDITH AOENDITH
==> DITHER ENABLED
2024:308:17:41:55.377 9607571 ACISPKT AA00000000
==> ACIS integration time of 18.00 ks.
This is 92.31% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:308:17:41:55.377 9607571 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:308:17:43:54.777 9608037 SIMFOCUS -418
2024:308:17:44:55.377 9608274 MP_OBSID 29805
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29805:
Target Name: eRASSU J080717.2-182019 SI Mode: TE_0065A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2024:308:17:45:14.177 9608347 SIMFOCUS -468
2024:308:17:55:05.952 9610656 ACISPKT AA00000000
2024:308:17:55:09.952 9610672 ACISPKT AA00000000
2024:308:17:55:13.952 9610688 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:308:17:55:37.952 9610781 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2024:308:17:56:40.952 9611027 ACISPKT WT0065A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0065a034
fepCcdSelect = 10 7 6 3 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:308:17:56:44.952 9611043 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29805
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0065AB is WT0065A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29805,OORMPEN,CSELFMT2,ENAB)
2024:308:17:56:48.952 9611058 ACISPKT RS_0000001
2024:308:17:56:52.952 9611074 ACISPKT RH_0000001
2024:308:19:15:01.285 REAL-TIME COMM BEGINS 2024:308:14:15:01.285 EST
2024:308:20:45:01.285 REAL-TIME COMM ENDS 2024:308:15:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:308:22:44:02.952 9678313 ACISPKT AA00000000
==> ACIS integration time of 16.00 ks.
This is 106.67% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:308:22:44:02.952 9678313 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:308:22:46:02.352 9678779 SIMFOCUS -536
2024:308:22:47:02.952 9679015 MP_OBSID 30594
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30594:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:308:22:57:08.584 9681379 ACISPKT AA00000000
2024:308:22:57:12.584 9681394 ACISPKT AA00000000
2024:308:22:57:16.584 9681410 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:308:22:57:40.584 9681504 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:308:22:58:43.584 9681750 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:308:22:58:47.584 9681765 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30594
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30594,OORMPEN,CSELFMT2,ENAB)
2024:308:22:58:51.584 9681781 ACISPKT RS_0000001
2024:308:22:58:55.584 9681796 ACISPKT RH_0000001
2024:309:02:39:25.584 9733426 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 92.31% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 10 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
31 24 24 22 22 68
**NOTE: There are 2 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 3 3
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. RadMon was disabled prior to radbelt transit but we were NOT at HRC-S yet.
o. Either Radmon was NOT ENABLED at least 15 ks after an electron 1 exit.
-OR- Radmon was NOT enabled after electron 1 exit.
o. There is a change from FMT2 before an ACIS stop science.
o. There is a SIM translation that occurs DURING an ACIS science run.
o. The OBSID change to 29752 that occurs less than 3 mins after a stop science.
o. The OBSID change to 28036 that occurs less than 3 mins after a stop science.
o. The OBSID change to 28601 that occurs less than 3 mins after a stop science.
o. The parameter block stored does not match the SI_mode.
o. The OBSID change to 25549 that occurs less than 3 mins after a stop science.
o. The OBSID change to 30593 that occurs less than 3 mins after a stop science.
o. The Instrument, SIM-Z or Grating was incorrect for obsid(s)
- 28659
o. The parameter block was incorrect for obsid(s)
- 28601
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED