-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2025/MAR0325/oflsa/CR061_2301.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2025/FEB2425/ofls/ACIS-History.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (ACIS-S,HETG-OUT,LETG-OUT,30816,OORMPEN,CSELFMT2,ENAB)
2025:061:23:35:37.150 16259270 SIMTRANS -50504 (HRC-I)
2025:061:23:38:37.150 16259973 COMMAND_HW CSELFMT1
2025:061:23:38:37.150 16259973 MP_OBSID 28342
LATEST OCAT INFO FOR OBSID 28342:
No ACIS info found for obsid 28342.
This is an HRC-I observation.
2025:061:23:38:37.150 16259973 ACISPKT AA00000000
2025:061:23:38:41.150 16259988 ACISPKT AA00000000
2025:061:23:38:45.150 16260004 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:061:23:39:09.150 16260098 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2025:061:23:40:06.550 16260322 SIMFOCUS -716
2025:061:23:40:12.150 16260344 ACISPKT RS_0000001
2025:061:23:40:16.150 16260359 ACISPKT RH_0000001
2025:061:23:40:39.150 16260449 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2025:061:23:40:43.150 16260464 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2025:061:23:40:47.150 16260480 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,28342,OORMPEN,CSELFMT1,ENAB)
2025:061:23:55:33.695 16263940 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:00:13:08.150 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2025:062:02:24:38.150 16298845 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 163.85 minutes AFTER A START SCIENCE.
2025:062:02:24:50.150 215PCAOF command: HRC Observation Ends
2025:062:02:24:50.150 16298892 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:02:24:52.150 16298900 COMMAND_HW CSELFMT2
2025:062:02:24:52.150 16298900 MP_OBSID 29709
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29709:
Target Name: DQ Tau periastron 3 SI Mode: TE_00C10
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 1.5 Remaining Exposure time: 1.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNNNNN
Subarray Type: CUSTOM Start: 897 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.002222 deg Y Freq: 0.509100 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:062:02:29:31.550 16299990 SIMFOCUS -486
2025:062:02:30:52.950 16300308 SIMFOCUS -536
2025:062:02:35:01.285 REAL-TIME COMM BEGINS 2025:61:21:35:01.285 EST
2025:062:02:37:30.156 16301858 ACISPKT AA00000000
2025:062:02:37:34.156 16301873 ACISPKT AA00000000
2025:062:02:37:38.156 16301889 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:02:38:02.156 16301983 ACISPKT WSPOW00802
==> WSPOW COMMAND LOADS: Feps 1; I3
2025:062:02:39:05.156 16302228 ACISPKT WT00C10014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c10014
fepCcdSelect = 10 3 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 896
subarrayRowCount = 127
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:02:39:09.156 16302244 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29709
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C10B is WT00C10014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29709,OORMPEN,CSELFMT2,ENAB)
2025:062:02:39:13.156 16302260 ACISPKT RS_0000001
2025:062:02:39:17.156 16302275 ACISPKT RH_0000001
2025:062:02:44:15.156 16303438 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:03:15:45.156 16310814 ACISPKT AA00000000
==> ACIS integration time of 1.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:03:15:45.156 16310814 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:062:03:17:44.556 16311280 SIMFOCUS -418
2025:062:03:18:45.156 16311516 MP_OBSID 28562
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28562:
Target Name: PSO J170.8326+20.2083 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:062:03:19:03.956 16311590 SIMFOCUS -468
2025:062:03:38:48.876 16316214 ACISPKT AA00000000
2025:062:03:38:52.876 16316229 ACISPKT AA00000000
2025:062:03:38:56.876 16316245 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:03:39:20.876 16316339 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:062:03:40:23.876 16316584 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:03:40:27.876 16316600 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28562
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28562,OORMPEN,CSELFMT2,ENAB)
2025:062:03:40:31.876 16316616 ACISPKT RS_0000001
2025:062:03:40:35.876 16316631 ACISPKT RH_0000001
2025:062:03:50:09.876 16318871 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:04:05:01.285 REAL-TIME COMM ENDS 2025:61:23:05:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:062:06:43:19.876 16359418 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:06:46:19.876 16360120 MP_OBSID 28152
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28152:
Target Name: NGC 2655 SI Mode: TE_00A88
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:062:06:59:02.783 16363097 ACISPKT AA00000000
2025:062:06:59:06.783 16363113 ACISPKT AA00000000
2025:062:06:59:10.783 16363128 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:06:59:34.783 16363222 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:062:07:00:37.783 16363468 ACISPKT WT00A88024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a88024
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 9
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:07:00:41.783 16363484 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28152
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A88B is WT00A88024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28152,OORMPEN,CSELFMT2,ENAB)
2025:062:07:00:45.783 16363499 ACISPKT RS_0000001
2025:062:07:00:49.783 16363515 ACISPKT RH_0000001
2025:062:08:02:46.814 16378017 ORBPOINT EAPOGEE
2025:062:10:40:49.783 16415027 ACISPKT AA00000000
==> ACIS integration time of 12.50 ks.
This is 96.15% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:10:40:49.783 16415027 SIMTRANS -50504 (HRC-I)
2025:062:10:43:49.783 16415729 COMMAND_HW CSELFMT1
2025:062:10:43:49.783 16415729 MP_OBSID 30830
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30830:
No ACIS info found for obsid 30830.
This is an HRC-I observation.
2025:062:10:43:49.783 16415729 ACISPKT AA00000000
2025:062:10:43:53.783 16415745 ACISPKT AA00000000
2025:062:10:43:57.783 16415761 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:10:44:21.783 16415854 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2025:062:10:45:19.183 16416078 SIMFOCUS -716
2025:062:10:45:24.783 16416100 ACISPKT RS_0000001
2025:062:10:45:28.783 16416116 ACISPKT RH_0000001
2025:062:10:45:51.783 16416205 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2025:062:10:45:55.783 16416221 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2025:062:10:45:59.783 16416237 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,30830,OORMPEN,CSELFMT1,ENAB)
2025:062:11:14:13.897 16422848 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:11:18:20.783 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2025:062:12:20:01.285 REAL-TIME COMM BEGINS 2025:062:07:20:01.285 EST
2025:062:13:28:14.783 16454227 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 162.25 minutes AFTER A START SCIENCE.
2025:062:13:28:26.783 16454274 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:13:28:26.783 215PCAOF command: HRC Observation Ends
2025:062:13:28:28.783 16454282 COMMAND_HW CSELFMT2
2025:062:13:28:28.783 16454282 MP_OBSID 29710
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29710:
Target Name: DQ Tau periastron 3 SI Mode: TE_00C10
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 1.5 Remaining Exposure time: 1.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNNNNN
Subarray Type: CUSTOM Start: 897 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.002222 deg Y Freq: 0.509100 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:062:13:33:08.183 16455372 SIMFOCUS -486
2025:062:13:34:29.583 16455690 SIMFOCUS -536
2025:062:13:41:06.761 16457240 ACISPKT AA00000000
2025:062:13:41:10.761 16457255 ACISPKT AA00000000
2025:062:13:41:14.761 16457271 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:13:41:38.761 16457364 ACISPKT WSPOW00802
==> WSPOW COMMAND LOADS: Feps 1; I3
2025:062:13:42:41.761 16457610 ACISPKT WT00C10014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c10014
fepCcdSelect = 10 3 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 896
subarrayRowCount = 127
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:13:42:45.761 16457626 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29710
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C10B is WT00C10014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29710,OORMPEN,CSELFMT2,ENAB)
2025:062:13:42:49.761 16457641 ACISPKT RS_0000001
2025:062:13:42:53.761 16457657 ACISPKT RH_0000001
2025:062:13:47:51.761 16458820 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:13:50:01.285 REAL-TIME COMM ENDS 2025:062:08:50:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:062:14:19:21.761 16466196 ACISPKT AA00000000
==> ACIS integration time of 1.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:14:19:21.761 16466196 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:062:14:21:21.161 16466662 SIMFOCUS -418
2025:062:14:22:21.761 16466898 MP_OBSID 30831
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30831:
Target Name: PSO J170.8326+20.2083 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:062:14:22:40.561 16466971 SIMFOCUS -468
2025:062:14:42:25.481 16471596 ACISPKT AA00000000
2025:062:14:42:29.481 16471611 ACISPKT AA00000000
2025:062:14:42:33.481 16471627 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:14:42:57.481 16471720 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:062:14:44:00.481 16471966 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:14:44:04.481 16471982 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30831
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30831,OORMPEN,CSELFMT2,ENAB)
2025:062:14:44:08.481 16471997 ACISPKT RS_0000001
2025:062:14:44:12.481 16472013 ACISPKT RH_0000001
2025:062:14:53:46.481 16474253 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:17:46:56.481 16514799 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:17:49:56.481 16515502 MP_OBSID 30827
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30827:
Target Name: NGC 2655 SI Mode: TE_00A88
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: CUSTOM Start: 385 Rows: 256 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:062:18:02:40.322 16518483 ACISPKT AA00000000
2025:062:18:02:44.322 16518498 ACISPKT AA00000000
2025:062:18:02:48.322 16518514 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:18:03:12.322 16518608 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:062:18:04:15.322 16518853 ACISPKT WT00A88024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a88024
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 384
subarrayRowCount = 255
primaryExposure = 9
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:18:04:19.322 16518869 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30827
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A88B is WT00A88024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30827,OORMPEN,CSELFMT2,ENAB)
2025:062:18:04:23.322 16518885 ACISPKT RS_0000001
2025:062:18:04:27.322 16518900 ACISPKT RH_0000001
2025:062:21:41:07.322 16569632 ACISPKT AA00000000
==> ACIS integration time of 12.30 ks.
This is 102.50% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:21:41:07.322 16569632 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:062:21:43:06.722 16570098 SIMFOCUS -536
2025:062:21:44:07.322 16570334 MP_OBSID 29711
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29711:
Target Name: DQ Tau periastron 3 SI Mode: TE_00C10
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 1.5 Remaining Exposure time: 1.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNNNNN
Subarray Type: CUSTOM Start: 897 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.002222 deg Y Freq: 0.509100 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:062:21:59:29.993 16573935 ACISPKT AA00000000
2025:062:21:59:33.993 16573951 ACISPKT AA00000000
2025:062:21:59:37.993 16573966 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:22:00:01.993 16574060 ACISPKT WSPOW00802
==> WSPOW COMMAND LOADS: Feps 1; I3
2025:062:22:01:04.993 16574306 ACISPKT WT00C10014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c10014
fepCcdSelect = 10 3 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 896
subarrayRowCount = 127
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:22:01:08.993 16574321 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29711
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C10B is WT00C10014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29711,OORMPEN,CSELFMT2,ENAB)
2025:062:22:01:12.993 16574337 ACISPKT RS_0000001
2025:062:22:01:16.993 16574353 ACISPKT RH_0000001
2025:062:22:06:14.993 16575516 AOENDITH AOENDITH
==> DITHER ENABLED
2025:062:22:37:44.993 16582891 ACISPKT AA00000000
==> ACIS integration time of 1.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:062:22:37:44.993 16582891 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:062:22:39:44.393 16583357 SIMFOCUS -418
2025:062:22:40:44.993 16583594 MP_OBSID 30832
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30832:
Target Name: PSO J170.8326+20.2083 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:062:22:41:03.793 16583667 SIMFOCUS -468
2025:062:23:02:59.904 16588803 ACISPKT AA00000000
2025:062:23:03:03.904 16588819 ACISPKT AA00000000
2025:062:23:03:07.904 16588834 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:062:23:03:31.904 16588928 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:062:23:04:34.904 16589174 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:062:23:04:38.904 16589189 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30832
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30832,OORMPEN,CSELFMT2,ENAB)
2025:062:23:04:42.904 16589205 ACISPKT RS_0000001
2025:062:23:04:46.904 16589221 ACISPKT RH_0000001
2025:062:23:14:20.904 16591461 AOENDITH AOENDITH
==> DITHER ENABLED
2025:063:02:07:30.904 16632007 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:063:02:07:30.904 16632007 SIMTRANS -50504 (HRC-I)
2025:063:02:10:30.904 16632709 COMMAND_HW CSELFMT1
2025:063:02:10:30.904 16632709 MP_OBSID 26970
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26970:
No ACIS info found for obsid 26970.
This is an HRC-I observation.
2025:063:02:10:30.904 16632709 ACISPKT AA00000000
2025:063:02:10:34.904 16632725 ACISPKT AA00000000
2025:063:02:10:38.904 16632741 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:063:02:11:02.904 16632834 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2025:063:02:12:00.304 16633058 SIMFOCUS -716
2025:063:02:12:05.904 16633080 ACISPKT RS_0000001
2025:063:02:12:09.904 16633096 ACISPKT RH_0000001
2025:063:02:12:32.904 16633185 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2025:063:02:12:36.904 16633201 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2025:063:02:12:40.904 16633217 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,26970,OORMPEN,CSELFMT1,ENAB)
2025:063:02:41:13.211 16639899 AOENDITH AOENDITH
==> DITHER ENABLED
2025:063:02:45:01.904 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2025:063:03:45:01.285 REAL-TIME COMM BEGINS 2025:62:22:45:01.285 EST
2025:063:04:13:29.904 16661505 MP_OBSID 30453
>>>ERROR: The OBSID change to 30453 occurs more than 5 mins after a start science.
LATEST OCAT INFO FOR OBSID 30453:
No ACIS info found for obsid 30453.
This is an HRC-I observation.
2025:063:05:15:01.285 REAL-TIME COMM ENDS 2025:063:00:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:063:06:06:31.416 16687970 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 233.84 minutes AFTER A START SCIENCE.
2025:063:06:06:43.416 16688017 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:063:06:06:43.416 215PCAOF command: HRC Observation Ends
2025:063:06:06:45.416 16688025 COMMAND_HW CSELFMT2
2025:063:06:06:45.416 16688025 MP_OBSID 29906
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29906:
Target Name: IGR J09331-4725 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 5 Remaining Exposure time: 5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:063:06:11:24.816 16689115 SIMFOCUS -486
2025:063:06:12:46.216 16689433 SIMFOCUS -536
2025:063:06:16:32.967 16690317 ACISPKT AA00000000
2025:063:06:16:36.967 16690333 ACISPKT AA00000000
2025:063:06:16:40.967 16690349 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:063:06:17:04.967 16690442 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2025:063:06:18:07.967 16690688 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:063:06:18:11.967 16690704 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29906
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29906,OORMPEN,CSELFMT2,ENAB)
2025:063:06:18:15.967 16690719 ACISPKT RS_0000001
2025:063:06:18:19.967 16690735 ACISPKT RH_0000001
2025:063:06:32:19.967 16694013 AOENDITH AOENDITH
==> DITHER ENABLED
2025:063:08:02:09.967 16715047 ACISPKT AA00000000
==> ACIS integration time of 5.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:063:08:05:09.967 16715750 MP_OBSID 29712
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29712:
Target Name: DQ Tau periastron 3 SI Mode: TE_00C10
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 1.5 Remaining Exposure time: 1.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNNNNN
Subarray Type: CUSTOM Start: 897 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.002222 deg Y Freq: 0.509100 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:063:08:25:45.554 16720571 ACISPKT AA00000000
2025:063:08:25:49.554 16720587 ACISPKT AA00000000
2025:063:08:25:53.554 16720603 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:063:08:26:17.554 16720696 ACISPKT WSPOW00802
==> WSPOW COMMAND LOADS: Feps 1; I3
2025:063:08:27:20.554 16720942 ACISPKT WT00C10014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00c10014
fepCcdSelect = 10 3 10 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 896
subarrayRowCount = 127
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:063:08:27:24.554 16720958 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29712
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00C10B is WT00C10014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29712,OORMPEN,CSELFMT2,ENAB)
2025:063:08:27:28.554 16720973 ACISPKT RS_0000001
2025:063:08:27:32.554 16720989 ACISPKT RH_0000001
2025:063:08:32:30.554 16722152 AOENDITH AOENDITH
==> DITHER ENABLED
2025:063:09:04:11.325 16729570 ACISPKT AA00000000
==> ACIS integration time of 1.51 ks.
This is 100.72% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:063:09:04:11.325 16729570 SIMTRANS -99616 (HRC-S)
2025:063:09:07:11.325 16730272 COMMAND_HW CSELFMT6
2025:063:09:07:11.325 16730272 MP_OBSID 42609
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42609:
No ocat info found for obsid 42609
2025:063:09:07:45.664 16730406 COMMAND_SW 4OHETGIN
2025:063:09:10:11.725 16730976 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2025:063:09:10:11.725 16730976 ACISPKT AA00000000
2025:063:09:10:15.725 16730992 ACISPKT AA00000000
2025:063:09:10:19.725 16731007 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:063:09:10:43.725 16731101 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2025:063:09:11:46.725 16731347 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2025:063:09:11:50.725 16731362 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 42609
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,42609,OORMPDS,CSELFMT6,ENAB)
2025:063:09:11:54.725 16731378 ACISPKT RS_0000001
2025:063:09:11:58.725 16731394 ACISPKT RH_0000001
2025:063:09:12:06.689 16731425 COMMAND_HW CSELFMT2
2025:063:09:33:19.660 16736392 AOENDITH AOENDITH
==> DITHER ENABLED
2025:063:10:34:43.269 16750767 ACISPKT AA00000000
==> ACIS integration time of 3.57 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2025:063:10:37:43.269 16751470 ACISPKT AA00000000
2025:063:10:37:43.269 16751470 ORBPOINT EEF1000
==> Entry leg pad time is 5.25 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 063:10:37:43
from CRM file: EE1RADZ0 = 063:10:37:43
==> CRM Pad Time: 5.252 ks and Backstop Pad Time: 5.25 ks agree.
2025:063:10:37:52.269 16751505 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2025:063:10:38:55.269 16751751 ACISPKT RS_0000001
2025:063:11:47:39.215 16767844 MP_OBSID 42608
==> ObsID change occurs 69.9 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42608:
No ocat info found for obsid 42608
2025:063:13:21:17.294 12552 MP_OBSID 42607
LATEST OCAT INFO FOR OBSID 42607:
No ocat info found for obsid 42607
2025:063:14:40:59.868 31216 MP_OBSID 42606
LATEST OCAT INFO FOR OBSID 42606:
No ocat info found for obsid 42606
2025:063:15:39:00.000 44797 MP_OBSID 42605
LATEST OCAT INFO FOR OBSID 42605:
No ocat info found for obsid 42605
2025:063:15:46:29.368 45790 ORBPOINT EPERIGEE
2025:063:16:20:30.000 54514 MP_OBSID 42604
LATEST OCAT INFO FOR OBSID 42604:
No ocat info found for obsid 42604
2025:063:17:10:20.687 66185 MP_OBSID 42603
LATEST OCAT INFO FOR OBSID 42603:
No ocat info found for obsid 42603
2025:063:17:59:25.130 77676 MP_OBSID 42602
LATEST OCAT INFO FOR OBSID 42602:
No ocat info found for obsid 42602
2025:063:18:33:43.269 85707 ACISPKT RBTXINGBLL
2025:063:18:43:43.269 85707 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2025:063:19:08:21.622 93818 MP_OBSID 42601
LATEST OCAT INFO FOR OBSID 42601:
No ocat info found for obsid 42601
2025:063:20:40:01.285 REAL-TIME COMM BEGINS 2025:063:15:40:01.285 EST
2025:063:20:41:10.261 115549 COMMAND_HW CSELFMT6
2025:063:20:41:44.600 115683 COMMAND_SW 4OHETGRE
2025:063:20:46:05.625 116702 COMMAND_HW CSELFMT2
2025:063:20:46:10.725 116722 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.35 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 063:18:43:43
from CRM file: XE1RADZ0 = 063:18:43:43
>>>CRM Pad Time: 0 ks and Backstop Pad Time: 7.35 ks do not agree!!
This could be due to extended CTI measurement
-OR- error in the load.
>>>ERROR: RADMON occurs 608.46 min AFTER stop science.
2025:063:20:46:11.725 116726 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:063:20:46:12.725 116730 MP_OBSID 28301
LATEST OCAT INFO FOR OBSID 28301:
Target Name: NGC410 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 9 Remaining Exposure time: 9
Offset: Y: -1 Z: 0 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:063:20:46:38.425 116830 ACISPKT AA00000000
2025:063:20:46:42.425 116846 ACISPKT AA00000000
2025:063:20:46:46.425 116861 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:063:20:47:10.425 116955 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2025:063:20:48:13.425 117201 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
>>> Warning - Long Dwell: 2025:063:20:48:17.425 Dwell time: 36814.2 seconds
2025:063:20:48:17.425 117216 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28301
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28301,OORMPEN,CSELFMT2,ENAB)
2025:063:20:48:21.425 117232 ACISPKT RS_0000001
2025:063:20:48:25.425 117248 ACISPKT RH_0000001
2025:063:20:51:49.125 118042 SIMFOCUS -418
2025:063:20:53:08.525 118352 SIMFOCUS -468
2025:063:22:10:01.285 REAL-TIME COMM ENDS 2025:063:17:10:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:063:23:42:15.425 157950 ACISPKT AA00000000
==> ACIS integration time of 9.20 ks.
This is 102.22% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:063:23:45:15.425 158652 MP_OBSID 30622
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30622:
Target Name: 3C264 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 14.1 Remaining Exposure time: 14.1
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:064:00:07:40.729 163902 ACISPKT AA00000000
2025:064:00:07:44.729 163918 ACISPKT AA00000000
2025:064:00:07:48.729 163934 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:064:00:08:12.729 164027 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:064:00:09:15.729 164273 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:064:00:09:19.729 164289 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30622
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30622,OORMPEN,CSELFMT2,ENAB)
2025:064:00:09:23.729 164304 ACISPKT RS_0000001
2025:064:00:09:27.729 164320 ACISPKT RH_0000001
2025:064:03:30:01.285 REAL-TIME COMM BEGINS 2025:63:22:30:01.285 EST
2025:064:04:02:11.729 218814 ACISPKT AA00000000
==> ACIS integration time of 13.00 ks.
This is 92.20% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:064:04:05:11.729 219516 MP_OBSID 30828
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30828:
Target Name: NGC410 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: -1 Z: 0 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:064:04:23:11.031 223728 ACISPKT AA00000000
2025:064:04:23:15.031 223744 ACISPKT AA00000000
2025:064:04:23:19.031 223759 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:064:04:23:43.031 223853 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2025:064:04:24:46.031 224099 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:064:04:24:50.031 224114 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30828
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30828,OORMPEN,CSELFMT2,ENAB)
2025:064:04:24:54.031 224130 ACISPKT RS_0000001
2025:064:04:24:58.031 224146 ACISPKT RH_0000001
2025:064:05:00:01.285 REAL-TIME COMM ENDS 2025:064:00:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:064:08:18:48.031 278897 ACISPKT AA00000000
==> ACIS integration time of 12.80 ks.
This is 98.46% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:064:08:21:48.031 279599 MP_OBSID 30837
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30837:
Target Name: 3C264 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:064:08:44:11.764 284843 ACISPKT AA00000000
2025:064:08:44:15.764 284859 ACISPKT AA00000000
2025:064:08:44:19.764 284874 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:064:08:44:43.764 284968 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:064:08:45:46.764 285214 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:064:08:45:50.764 285229 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30837
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30837,OORMPEN,CSELFMT2,ENAB)
2025:064:08:45:54.764 285245 ACISPKT RS_0000001
2025:064:08:45:58.764 285261 ACISPKT RH_0000001
2025:064:12:15:01.285 REAL-TIME COMM BEGINS 2025:064:07:15:01.285 EST
2025:064:12:22:02.764 335852 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 92.31% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:064:12:25:02.764 336554 MP_OBSID 30829
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30829:
Target Name: NGC410 SI Mode: TE_006C8
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: -1 Z: 0 Z-sim: 0
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:064:12:43:00.495 340760 ACISPKT AA00000000
2025:064:12:43:04.495 340776 ACISPKT AA00000000
2025:064:12:43:08.495 340791 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:064:12:43:32.495 340885 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2025:064:12:44:35.495 341131 ACISPKT WT006C8034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006c8034
fepCcdSelect = 10 7 5 6 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:064:12:44:39.495 341146 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30829
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006C8B is WT006C8034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30829,OORMPEN,CSELFMT2,ENAB)
2025:064:12:44:43.495 341162 ACISPKT RS_0000001
2025:064:12:44:47.495 341178 ACISPKT RH_0000001
2025:064:13:45:01.285 REAL-TIME COMM ENDS 2025:064:08:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:064:16:25:17.495 392807 ACISPKT AA00000000
==> ACIS integration time of 12.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:064:16:28:17.495 393509 MP_OBSID 30838
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30838:
Target Name: 3C264 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10.7 Remaining Exposure time: 10.7
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:064:16:50:41.228 398753 ACISPKT AA00000000
2025:064:16:50:45.228 398769 ACISPKT AA00000000
2025:064:16:50:49.228 398784 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:064:16:51:13.228 398878 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:064:16:52:16.228 399124 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:064:16:52:20.228 399139 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30838
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30838,OORMPEN,CSELFMT2,ENAB)
2025:064:16:52:24.228 399155 ACISPKT RS_0000001
2025:064:16:52:28.228 399171 ACISPKT RH_0000001
2025:064:19:40:01.285 REAL-TIME COMM BEGINS 2025:064:14:40:01.285 EST
2025:064:19:55:12.228 441957 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 93.46% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:064:19:55:12.228 441957 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:064:19:57:11.628 442423 SIMFOCUS -536
2025:064:19:58:12.228 442659 MP_OBSID 30379
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30379:
Target Name: Abell 2108 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 27 Remaining Exposure time: 27
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:064:20:04:22.600 444105 ACISPKT AA00000000
2025:064:20:04:26.600 444120 ACISPKT AA00000000
2025:064:20:04:30.600 444136 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:064:20:04:54.600 444230 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2025:064:20:05:57.600 444476 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:064:20:06:01.600 444491 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30379
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30379,OORMPEN,CSELFMT2,ENAB)
2025:064:20:06:05.600 444507 ACISPKT RS_0000001
2025:064:20:06:09.600 444522 ACISPKT RH_0000001
2025:064:21:10:01.285 REAL-TIME COMM ENDS 2025:064:16:10:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:064:23:30:40.040 492404 ORBPOINT EAPOGEE
2025:065:03:15:01.285 REAL-TIME COMM BEGINS 2025:64:22:15:01.285 EST
2025:065:03:56:39.600 554688 ACISPKT AA00000000
==> ACIS integration time of 27.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:065:03:59:39.600 555391 MP_OBSID 42600
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42600:
No ocat info found for obsid 42600
2025:065:04:25:15.494 561384 MP_OBSID 30110
LATEST OCAT INFO FOR OBSID 30110:
Target Name: PSR J1101-6101 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 30 Remaining Exposure time: 30
Offset: Y: -0.3 Z: 0 Z-sim: -0.8775
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:065:04:25:15.494 561384 SIMTRANS 92560 (ACIS-I)
==> THERE IS A Z-SIM OF -0.87 mm FOR THIS OBSERVATION.
2025:065:04:45:01.285 REAL-TIME COMM ENDS 2025:64:23:45:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:065:04:56:03.079 568594 ACISPKT WSVIDALLDN
2025:065:04:56:21.079 568665 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2025:065:04:57:24.079 568911 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:065:04:57:28.079 568926 ACISPKT RS_0000001
2025:065:04:57:32.079 568942 ACISPKT RH_0000001
2025:065:04:57:55.079 569032 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30110
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30110,OORMPEN,CSELFMT2,ENAB)
2025:065:11:45:01.285 REAL-TIME COMM BEGINS 2025:065:06:45:01.285 EST
2025:065:13:15:01.285 REAL-TIME COMM ENDS 2025:065:08:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:065:13:18:02.079 686132 ACISPKT AA00000000
==> ACIS integration time of 30.01 ks.
This is 100.02% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:065:13:18:02.079 686132 SIMTRANS -50504 (HRC-I)
2025:065:13:21:02.079 686834 COMMAND_HW CSELFMT1
2025:065:13:21:02.079 686834 MP_OBSID 28761
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28761:
No ACIS info found for obsid 28761.
This is an HRC-I observation.
2025:065:13:21:02.079 686834 ACISPKT AA00000000
2025:065:13:21:06.079 686850 ACISPKT AA00000000
2025:065:13:21:10.079 686866 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:065:13:21:34.079 686959 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2025:065:13:22:37.079 687205 ACISPKT RS_0000001
2025:065:13:22:41.079 687221 ACISPKT RH_0000001
2025:065:13:22:54.479 687273 SIMFOCUS -716
2025:065:13:23:04.079 687311 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2025:065:13:23:08.079 687326 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2025:065:13:23:12.079 687342 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,28761,OORMPEN,CSELFMT1,ENAB)
2025:065:13:49:27.035 693488 AOENDITH AOENDITH
==> DITHER ENABLED
2025:065:13:55:33.079 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2025:065:17:35:27.079 746405 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 252.25 minutes AFTER A START SCIENCE.
2025:065:17:35:39.079 746452 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:065:17:35:39.079 215PCAOF command: HRC Observation Ends
2025:065:17:35:41.079 746460 COMMAND_HW CSELFMT2
2025:065:17:35:41.079 746460 MP_OBSID 28146
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 28146:
Target Name: 2MASXJ08370182-4954302 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 25 Remaining Exposure time: 25
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:065:17:39:56.479 747457 SIMFOCUS -418
2025:065:17:41:18.879 747778 SIMFOCUS -468
2025:065:17:59:55.586 752136 ACISPKT AA00000000
2025:065:17:59:59.586 752152 ACISPKT AA00000000
2025:065:18:00:03.586 752167 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:065:18:00:27.586 752261 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:065:18:01:30.586 752507 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:065:18:01:34.586 752522 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28146
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28146,OORMPEN,CSELFMT2,ENAB)
2025:065:18:01:38.586 752538 ACISPKT RS_0000001
2025:065:18:01:42.586 752554 ACISPKT RH_0000001
2025:065:18:11:16.586 754794 AOENDITH AOENDITH
==> DITHER ENABLED
2025:065:19:20:01.285 REAL-TIME COMM BEGINS 2025:065:14:20:01.285 EST
2025:065:20:50:01.285 REAL-TIME COMM ENDS 2025:065:15:50:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:066:00:49:40.279 848076 ACISPKT AA00000000
==> ACIS integration time of 23.51 ks.
This is 94.05% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:066:00:49:40.279 848076 SIMTRANS -99616 (HRC-S)
2025:066:00:52:40.279 848779 COMMAND_HW CSELFMT6
2025:066:00:52:40.279 848779 MP_OBSID 42599
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42599:
No ocat info found for obsid 42599
2025:066:00:53:14.618 848913 COMMAND_SW 4OHETGIN
2025:066:00:55:17.679 849393 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2025:066:00:55:17.679 849393 ACISPKT AA00000000
2025:066:00:55:21.679 849409 ACISPKT AA00000000
2025:066:00:55:25.679 849424 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:066:00:55:49.679 849518 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2025:066:00:56:52.679 849764 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2025:066:00:56:56.679 849779 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 42599
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,42599,OORMPDS,CSELFMT6,ENAB)
2025:066:00:57:00.679 849795 ACISPKT RS_0000001
2025:066:00:57:04.679 849810 ACISPKT RH_0000001
2025:066:00:57:35.643 849931 COMMAND_HW CSELFMT2
2025:066:01:49:49.223 862160 ACISPKT AA00000000
==> ACIS integration time of 1.77 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2025:066:01:52:49.223 862862 ACISPKT AA00000000
2025:066:01:52:49.223 862862 ORBPOINT EEF1000
==> Entry leg pad time is 3.45 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 066:01:52:49
from CRM file: EE1RADZ0 = 066:01:52:49
==> CRM Pad Time: 3.452 ks and Backstop Pad Time: 3.45 ks agree.
2025:066:01:52:58.223 862897 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2025:066:01:54:01.223 863143 ACISPKT RS_0000001
2025:066:02:00:01.285 REAL-TIME COMM BEGINS 2025:65:21:00:01.285 EST
2025:066:02:13:37.453 867733 MP_OBSID 42598
==> ObsID change occurs 20.8 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42598:
No ocat info found for obsid 42598
2025:066:03:17:34.473 882707 MP_OBSID 42597
LATEST OCAT INFO FOR OBSID 42597:
No ocat info found for obsid 42597
2025:066:03:30:01.285 REAL-TIME COMM ENDS 2025:65:22:30:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:066:04:45:54.372 903390 MP_OBSID 42596
LATEST OCAT INFO FOR OBSID 42596:
No ocat info found for obsid 42596
2025:066:06:10:59.860 923314 MP_OBSID 42595
LATEST OCAT INFO FOR OBSID 42595:
No ocat info found for obsid 42595
2025:066:07:08:00.000 936660 MP_OBSID 42594
LATEST OCAT INFO FOR OBSID 42594:
No ocat info found for obsid 42594
2025:066:07:15:13.085 937653 ORBPOINT EPERIGEE
2025:066:07:49:30.000 946378 MP_OBSID 42593
LATEST OCAT INFO FOR OBSID 42593:
No ocat info found for obsid 42593
2025:066:08:45:01.979 959380 MP_OBSID 42592
LATEST OCAT INFO FOR OBSID 42592:
No ocat info found for obsid 42592
2025:066:09:08:49.223 964950 ACISPKT RBTXINGBLL
2025:066:09:18:49.223 967292 ACISPKT AA00000000
2025:066:09:18:49.223 967292 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2025:066:09:18:53.223 967307 ACISPKT AA00000000
2025:066:09:18:57.223 967323 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:066:09:19:21.223 967416 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2025:066:09:20:24.223 967662 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2025:066:09:20:28.223 967678 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 42592
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,42592,OORMPDS,CSELFMT2,ENAB)
2025:066:09:20:32.223 967694 ACISPKT RS_0000001
2025:066:09:20:36.223 967709 ACISPKT RH_0000001
2025:066:11:28:27.751 997647 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2025:066:11:29:02.090 997781 COMMAND_SW 4OHETGRE
2025:066:11:32:17.679 998544 ACISPKT AA00000000
==> ACIS integration time of 0.20 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2025:066:11:33:23.115 998799 COMMAND_HW CSELFMT2
2025:066:11:35:16.679 999243 COMMAND_SW OORMPEN
==> Exit leg pad time is 8.19 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 066:09:18:49
from CRM file: XE1RADZ0 = 066:09:18:49
==> CRM Pad Time: 8.188 ks and Backstop Pad Time: 8.19 ks agree.
2025:066:11:35:17.679 999247 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:066:11:35:17.679 999247 ACISPKT AA00000000
2025:066:11:35:18.679 999250 MP_OBSID 30150
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 30150:
Target Name: NGC2566 SI Mode: TE_0065A
Instrument: ACIS-S Grating: NONE Type: CLP
Exposure Time: 30 Remaining Exposure time: 30
Offset: Y: -1.5 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:066:11:35:21.679 999262 ACISPKT AA00000000
2025:066:11:35:25.679 999278 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:066:11:35:49.679 999371 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2025:066:11:36:52.679 999617 ACISPKT WT0065A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0065a034
fepCcdSelect = 10 7 6 3 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:066:11:36:56.679 999633 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30150
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0065AB is WT0065A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30150,OORMPEN,CSELFMT2,ENAB)
2025:066:11:37:00.679 999648 ACISPKT RS_0000001
2025:066:11:37:04.679 999664 ACISPKT RH_0000001
2025:066:12:05:01.285 REAL-TIME COMM BEGINS 2025:066:07:05:01.285 EST
2025:066:13:35:01.285 REAL-TIME COMM ENDS 2025:066:08:35:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:066:18:40:01.285 REAL-TIME COMM BEGINS 2025:066:13:40:01.285 EST
2025:066:19:35:54.679 1111781 ACISPKT AA00000000
==> ACIS integration time of 27.50 ks.
This is 91.67% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:066:19:38:54.679 1112484 MP_OBSID 29973
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29973:
Target Name: SDSS J102328.12+161146.1 SI Mode: TE_00972
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 8.89943 Remaining Exposure time: 8.89943
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:066:19:51:53.874 1115524 ACISPKT AA00000000
2025:066:19:51:57.874 1115540 ACISPKT AA00000000
2025:066:19:52:01.874 1115556 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:066:19:52:25.874 1115649 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:066:19:53:28.874 1115895 ACISPKT WT00972024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00972024
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:066:19:53:32.874 1115911 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29973
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00972B is WT00972024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29973,OORMPEN,CSELFMT2,ENAB)
2025:066:19:53:36.874 1115926 ACISPKT RS_0000001
2025:066:19:53:40.874 1115942 ACISPKT RH_0000001
2025:066:20:10:01.285 REAL-TIME COMM ENDS 2025:066:15:10:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:066:22:38:04.304 1154433 ACISPKT AA00000000
==> ACIS integration time of 8.90 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:066:22:38:04.304 1154433 SIMTRANS -50504 (HRC-I)
2025:066:22:41:04.304 1155136 COMMAND_HW CSELFMT1
2025:066:22:41:04.304 1155136 MP_OBSID 27999
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27999:
No ACIS info found for obsid 27999.
This is an HRC-I observation.
2025:066:22:41:04.304 1155136 ACISPKT AA00000000
2025:066:22:41:08.304 1155151 ACISPKT AA00000000
2025:066:22:41:12.304 1155167 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:066:22:41:36.304 1155261 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2025:066:22:42:33.704 1155485 SIMFOCUS -716
2025:066:22:42:39.304 1155507 ACISPKT RS_0000001
2025:066:22:42:43.304 1155522 ACISPKT RH_0000001
2025:066:22:43:06.304 1155612 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2025:066:22:43:10.304 1155628 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2025:066:22:43:14.304 1155643 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,27999,OORMPEN,CSELFMT1,ENAB)
2025:066:23:13:12.360 1162660 AOENDITH AOENDITH
==> DITHER ENABLED
2025:066:23:15:35.304 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2025:067:02:47:09.304 1212755 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 243.92 minutes AFTER A START SCIENCE.
2025:067:02:47:21.304 1212802 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:067:02:47:21.304 215PCAOF command: HRC Observation Ends
2025:067:02:47:23.304 1212810 COMMAND_HW CSELFMT2
2025:067:02:47:23.304 1212810 MP_OBSID 30154
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 30154:
Target Name: NGC2566 SI Mode: TE_0065A
Instrument: ACIS-S Grating: NONE Type: CLP
Exposure Time: 14 Remaining Exposure time: 14
Offset: Y: -1.5 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:067:02:51:38.704 1213807 SIMFOCUS -418
2025:067:02:53:01.104 1214128 SIMFOCUS -468
2025:067:02:58:32.748 1215422 ACISPKT AA00000000
2025:067:02:58:36.748 1215438 ACISPKT AA00000000
2025:067:02:58:40.748 1215454 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:067:02:59:04.748 1215547 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2025:067:03:00:07.748 1215793 ACISPKT WT0065A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0065a034
fepCcdSelect = 10 7 6 3 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:067:03:00:11.748 1215809 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30154
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0065AB is WT0065A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30154,OORMPEN,CSELFMT2,ENAB)
2025:067:03:00:15.748 1215824 ACISPKT RS_0000001
2025:067:03:00:19.748 1215840 ACISPKT RH_0000001
2025:067:03:14:19.748 1219118 AOENDITH AOENDITH
==> DITHER ENABLED
2025:067:03:50:01.285 REAL-TIME COMM BEGINS 2025:66:22:50:01.285 EST
2025:067:05:00:01.285 REAL-TIME COMM ENDS 2025:067:00:00:01.285 EST
==> COMM DURATION: 70.00 mins.
2025:067:07:05:49.748 1273323 ACISPKT AA00000000
==> ACIS integration time of 13.50 ks.
This is 96.43% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:067:07:08:49.748 1274025 MP_OBSID 42591
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42591:
No ocat info found for obsid 42591
2025:067:07:49:56.501 1283652 MP_OBSID 28598
LATEST OCAT INFO FOR OBSID 28598:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 7 Remaining Exposure time: 7
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:067:07:49:56.501 1283652 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:067:07:51:55.901 1284118 SIMFOCUS -536
2025:067:08:10:00.377 1288350 ACISPKT AA00000000
2025:067:08:10:04.377 1288365 ACISPKT AA00000000
2025:067:08:10:08.377 1288381 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:067:08:10:32.377 1288475 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2025:067:08:11:35.377 1288720 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:067:08:11:39.377 1288736 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28598
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,28598,OORMPEN,CSELFMT2,ENAB)
2025:067:08:11:43.377 1288752 ACISPKT RS_0000001
2025:067:08:11:47.377 1288767 ACISPKT RH_0000001
2025:067:10:25:37.377 1320104 ACISPKT AA00000000
==> ACIS integration time of 6.80 ks.
This is 97.14% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:067:10:28:37.377 1320806 MP_OBSID 42590
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42590:
No ocat info found for obsid 42590
2025:067:10:51:33.080 1326175 MP_OBSID 30631
LATEST OCAT INFO FOR OBSID 30631:
Target Name: 3C264 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10.2 Remaining Exposure time: 10.2
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:067:10:51:33.080 1326175 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:067:10:53:32.480 1326641 SIMFOCUS -418
2025:067:10:54:51.880 1326951 SIMFOCUS -468
2025:067:11:08:37.022 1330171 ACISPKT AA00000000
2025:067:11:08:41.022 1330186 ACISPKT AA00000000
2025:067:11:08:45.022 1330202 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:067:11:09:09.022 1330296 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:067:11:10:12.022 1330542 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:067:11:10:16.022 1330557 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30631
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30631,OORMPEN,CSELFMT2,ENAB)
2025:067:11:10:20.022 1330573 ACISPKT RS_0000001
2025:067:11:10:24.022 1330588 ACISPKT RH_0000001
2025:067:13:20:01.285 REAL-TIME COMM BEGINS 2025:067:08:20:01.285 EST
2025:067:14:04:48.022 1371423 ACISPKT AA00000000
==> ACIS integration time of 9.50 ks.
This is 93.14% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:067:14:07:48.022 1372126 MP_OBSID 42589
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42589:
No ocat info found for obsid 42589
2025:067:14:35:34.351 1378629 MP_OBSID 30833
LATEST OCAT INFO FOR OBSID 30833:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:067:14:35:34.351 1378629 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:067:14:37:33.751 1379095 SIMFOCUS -536
2025:067:14:43:21.393 1380451 ACISPKT AA00000000
2025:067:14:43:25.393 1380467 ACISPKT AA00000000
2025:067:14:43:29.393 1380482 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:067:14:43:53.393 1380576 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2025:067:14:44:56.393 1380822 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:067:14:45:00.393 1380838 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30833
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30833,OORMPEN,CSELFMT2,ENAB)
2025:067:14:45:04.393 1380853 ACISPKT RS_0000001
2025:067:14:45:08.393 1380869 ACISPKT RH_0000001
2025:067:14:50:01.285 REAL-TIME COMM ENDS 2025:067:09:50:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:067:14:59:10.024 1384149 ORBPOINT EAPOGEE
2025:067:18:00:38.393 1426644 ACISPKT AA00000000
==> ACIS integration time of 10.50 ks.
This is 105.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:067:18:03:38.393 1427347 MP_OBSID 42588
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42588:
No ocat info found for obsid 42588
2025:067:18:26:33.516 1432713 MP_OBSID 30839
LATEST OCAT INFO FOR OBSID 30839:
Target Name: 3C264 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:067:18:26:33.516 1432713 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:067:18:28:32.916 1433179 SIMFOCUS -418
2025:067:18:29:52.316 1433489 SIMFOCUS -468
2025:067:18:43:38.241 1436712 ACISPKT AA00000000
2025:067:18:43:42.241 1436728 ACISPKT AA00000000
2025:067:18:43:46.241 1436743 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:067:18:44:10.241 1436837 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:067:18:45:13.241 1437083 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:067:18:45:17.241 1437098 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30839
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30839,OORMPEN,CSELFMT2,ENAB)
2025:067:18:45:21.241 1437114 ACISPKT RS_0000001
2025:067:18:45:25.241 1437130 ACISPKT RH_0000001
2025:067:21:30:01.285 REAL-TIME COMM BEGINS 2025:067:16:30:01.285 EST
2025:067:22:06:29.241 1484209 ACISPKT AA00000000
==> ACIS integration time of 11.10 ks.
This is 92.50% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:067:22:09:29.241 1484911 MP_OBSID 42587
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42587:
No ocat info found for obsid 42587
2025:067:22:37:16.377 1491417 MP_OBSID 30834
LATEST OCAT INFO FOR OBSID 30834:
Target Name: Abell 370 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:067:22:37:16.377 1491417 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:067:22:39:15.777 1491883 SIMFOCUS -536
2025:067:22:45:19.470 1493302 ACISPKT AA00000000
2025:067:22:45:23.470 1493318 ACISPKT AA00000000
2025:067:22:45:27.470 1493333 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:067:22:45:51.470 1493427 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2025:067:22:46:54.470 1493673 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:067:22:46:58.470 1493689 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30834
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,30834,OORMPEN,CSELFMT2,ENAB)
2025:067:22:47:02.470 1493704 ACISPKT RS_0000001
2025:067:22:47:06.470 1493720 ACISPKT RH_0000001
2025:067:23:00:01.285 REAL-TIME COMM ENDS 2025:067:18:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2025:068:02:35:56.470 1547300 ACISPKT AA00000000
==> ACIS integration time of 12.50 ks.
This is 96.15% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:068:02:35:56.470 1547300 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2025:068:02:37:55.870 1547766 SIMFOCUS -418
2025:068:02:38:56.470 1548003 MP_OBSID 30835
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30835:
Target Name: NGC2566 SI Mode: TE_0065A
Instrument: ACIS-S Grating: NONE Type: CLP
Exposure Time: 16 Remaining Exposure time: 16
Offset: Y: -1.5 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2025:068:02:39:15.270 1548076 SIMFOCUS -468
2025:068:02:47:57.920 1550116 ACISPKT AA00000000
2025:068:02:48:01.920 1550131 ACISPKT AA00000000
2025:068:02:48:05.920 1550147 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:068:02:48:29.920 1550241 ACISPKT WSPOW1C81E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I3 S2 S3 S4
2025:068:02:49:32.920 1550486 ACISPKT WT0065A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0065a034
fepCcdSelect = 10 7 6 3 8 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:068:02:49:36.920 1550502 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 30835
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0065AB is WT0065A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,30835,OORMPEN,CSELFMT2,ENAB)
2025:068:02:49:40.920 1550518 ACISPKT RS_0000001
2025:068:02:49:44.920 1550533 ACISPKT RH_0000001
2025:068:03:30:01.285 REAL-TIME COMM BEGINS 2025:67:23:30:01.285 EDT
2025:068:05:00:01.285 REAL-TIME COMM ENDS 2025:068:01:00:01.285 EDT
==> COMM DURATION: 90.00 mins.
2025:068:07:36:54.920 1617772 ACISPKT AA00000000
==> ACIS integration time of 16.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:068:07:36:54.920 1617772 SIMTRANS -50504 (HRC-I)
2025:068:07:39:54.920 1618475 COMMAND_HW CSELFMT1
2025:068:07:39:54.920 1618475 MP_OBSID 30836
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 30836:
No ACIS info found for obsid 30836.
This is an HRC-I observation.
2025:068:07:39:54.920 1618475 ACISPKT AA00000000
2025:068:07:39:58.920 1618490 ACISPKT AA00000000
2025:068:07:40:02.920 1618506 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:068:07:40:26.920 1618600 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2025:068:07:41:24.320 1618824 SIMFOCUS -716
2025:068:07:41:29.920 1618845 ACISPKT RS_0000001
2025:068:07:41:33.920 1618861 ACISPKT RH_0000001
2025:068:07:41:56.920 1618951 ACISPKT WT00DAA014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00daa014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 4
2025:068:07:42:00.920 1618966 ACISPKT W200138014
ACIS 2D WINDOW BLOCK LOADS:
windowSlotIndex = 4
windowBlockId = 0x00138014
ccdId = 0
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 1
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 2
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 3
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 4
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 5
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 6
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 7
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 8
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
ccdId = 9
ccdRow = 0
ccdColumn = 0
width = 1023
height = 1023
sampleCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
2025:068:07:42:04.920 1618982 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,30836,OORMPEN,CSELFMT1,ENAB)
2025:068:08:10:21.338 1625602 AOENDITH AOENDITH
==> DITHER ENABLED
2025:068:08:14:25.920 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2025:068:10:55:59.920 1664387 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 193.92 minutes AFTER A START SCIENCE.
2025:068:10:56:11.920 215PCAOF command: HRC Observation Ends
2025:068:10:56:11.920 1664434 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:068:10:56:13.920 1664442 COMMAND_HW CSELFMT6
2025:068:10:56:13.920 1664442 MP_OBSID 29749
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29749:
Target Name: MAXI J1744-294 SI Mode: TE_00D50
Instrument: ACIS-S Grating: HETG Type: TOO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: CUSTOM Start: 449 Rows: 128 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.002222 deg Z Freq: 0.360000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:068:10:56:48.259 1664576 COMMAND_SW 4OHETGIN
2025:068:11:00:29.320 1665438 SIMFOCUS -418
2025:068:11:01:09.284 1665594 COMMAND_HW CSELFMT2
2025:068:11:01:51.720 1665760 SIMFOCUS -468
2025:068:11:09:43.871 1667602 ACISPKT AA00000000
2025:068:11:09:47.871 1667618 ACISPKT AA00000000
2025:068:11:09:51.871 1667634 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:068:11:10:15.871 1667727 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2025:068:11:11:18.871 1667973 ACISPKT WT00D50014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00d50014
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 448
subarrayRowCount = 127
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:068:11:11:22.871 1667989 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29749
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00D50B is WT00D50014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-IN,LETG-OUT,29749,OORMPEN,CSELFMT2,ENAB)
2025:068:11:11:26.871 1668004 ACISPKT RS_0000001
2025:068:11:11:30.871 1668020 ACISPKT RH_0000001
2025:068:11:16:44.871 1669245 AOENDITH AOENDITH
==> DITHER ENABLED
2025:068:12:15:01.285 REAL-TIME COMM BEGINS 2025:068:08:15:01.285 EDT
2025:068:13:45:01.285 REAL-TIME COMM ENDS 2025:068:09:45:01.285 EDT
==> COMM DURATION: 90.00 mins.
2025:068:14:09:54.871 1709792 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:068:14:12:54.871 1710494 COMMAND_HW CSELFMT6
2025:068:14:12:54.871 1710494 MP_OBSID 29761
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29761:
Target Name: 1eRASS J121601.9-200929 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 5.3 Remaining Exposure time: 5.3
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 26 Obj_Flag: NO
2025:068:14:13:29.210 1710628 COMMAND_SW 4OHETGRE
2025:068:14:17:50.235 1711647 COMMAND_HW CSELFMT2
2025:068:14:21:07.692 1712417 ACISPKT AA00000000
2025:068:14:21:11.692 1712433 ACISPKT AA00000000
2025:068:14:21:15.692 1712448 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:068:14:21:39.692 1712542 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2025:068:14:22:42.692 1712788 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2025:068:14:22:46.692 1712804 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29761
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29761,OORMPEN,CSELFMT2,ENAB)
2025:068:14:22:50.692 1712819 ACISPKT RS_0000001
2025:068:14:22:54.692 1712835 ACISPKT RH_0000001
2025:068:14:35:30.692 1715785 AOENDITH AOENDITH
==> DITHER ENABLED
2025:068:16:10:38.199 1738058 ACISPKT AA00000000
==> ACIS integration time of 5.32 ks.
This is 100.33% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2025:068:16:10:38.199 1738058 SIMTRANS -99616 (HRC-S)
2025:068:16:13:38.199 1738761 COMMAND_HW CSELFMT6
2025:068:16:13:38.199 1738761 MP_OBSID 42586
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 42586:
No ocat info found for obsid 42586
2025:068:16:14:12.538 1738895 COMMAND_SW 4OHETGIN
2025:068:16:16:15.599 1739375 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2025:068:16:16:15.599 1739375 ACISPKT AA00000000
2025:068:16:16:19.599 1739391 ACISPKT AA00000000
2025:068:16:16:23.599 1739406 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2025:068:16:16:47.599 1739500 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2025:068:16:17:50.599 1739746 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2025:068:16:17:54.599 1739761 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 42586
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,42586,OORMPDS,CSELFMT6,ENAB)
2025:068:16:17:58.599 1739777 ACISPKT RS_0000001
2025:068:16:18:02.599 1739793 ACISPKT RH_0000001
2025:068:16:18:33.563 1739913 COMMAND_HW CSELFMT2
2025:068:17:40:47.143 1759166 ACISPKT AA00000000
==> ACIS integration time of 3.57 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2025:068:17:43:47.143 1759869 ACISPKT AA00000000
2025:068:17:43:47.143 1759869 ORBPOINT EEF1000
==> Entry leg pad time is 5.25 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 068:17:43:47
from CRM file: EE1RADZ0 = 068:17:43:47
==> CRM Pad Time: 5.252 ks and Backstop Pad Time: 5.25 ks agree.
2025:068:17:43:56.143 1759904 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2025:068:17:44:59.143 1760150 ACISPKT RS_0000001
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 18 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
61 43 43 40 40 121
**NOTE: There are 2 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
0 0 4 3
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. There is a SIM translation that occurs DURING an ACIS science run.
o. The OBSID change to 29709 that occurs less than 3 mins after a stop science.
o. The OBSID change to 29710 that occurs less than 3 mins after a stop science.
o. The OBSID change to 30453 occurs more than 5 mins after a start science.
o. The OBSID change to 29906 that occurs less than 3 mins after a stop science.
o. RadMon was disabled prior to radbelt transit but we were NOT at HRC-S yet.
o. RADMON occured more than 3.25 minutes AFTER stop science.
o. The OBSID change to 28146 that occurs less than 3 mins after a stop science.
o. There is a change from FMT2 before an ACIS stop science.
o. The OBSID change to 30150 that occurs less than 3 mins after a stop science.
o. The OBSID change to 30154 that occurs less than 3 mins after a stop science.
o. The OBSID change to 29749 that occurs less than 3 mins after a stop science.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED