| Step # | Title 4.5_V2.1 | Time (mins) | Cmd Desc | Cmd Mnem | Cmd EGSE | Seq Key | Tlm Desc | Tlm Mnem | Exp Val | Units | Tlm EGSE | Other Ver | Crit | Desc | Notes | RT Con | Tlm Fmt | Min Alt | SIM Pos |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Turn on DEA A | ||||||||||||||||||
| 1.1 | Enable DEA PS A | 1 | DEA PS A En | 1DEPSAEN | DEA A ENB/DIS | 1DEPSAX | ENB | 2 | Ignore if DPA unpowered | 1,2,4,6 | |||||||||
| 1.2 |
DEA Power A On | 1 |
DEA PS On A |
1DEPSAON |
DEA Input V A DEA Input I A DEA +24 V A DEA +6 V A DEA -6 V A DEA +15 V A DEA -15 V A DEA +28 V A |
1DEPSA 1DE28AVO 1DEICACU 1DEP2AVO 1DEP0AVO 1DEN0AVO 1DEP1AVO 1DEN1AVO 1DEP3AVO |
ON 25.0—34.0 0.62—0.75 24.0—26.0 5.6—6.7 -12.7 15.0—17.0 -32 >26.0 |
V A V V V V V V |
2 2 2 1 2 2 2 2 2 |
Ignore if DPA unpowered "Expect DEA side A power 21±3 W, " current is noisy so average needed. FP Temp set to 0 K | 1,2,4,6 |
||||||||
| 1.3 |
Verify DEA B is off | DEA Input I B DEA +6 V B DEA -6 V B DEA +15 V B DEA -15 V B DEA +24 V B DEA +28 V B |
1DEICBCU 1DEP0BVO 1DEN0BVO 1DEP1BVO 1DEN1BVO 1DEP2BVO 1DEP3BVO |
<0.2 0.0±0.2 0.0±0.2 0.0±0.2 0.0±0.2 0.0±0.2 0.0±0.2 |
A V V V V V V |
1,2,4,6 |
|||||||||||||
| 2 | Power up all boards | ||||||||||||||||||
| 2.1 |
Power up all video boards | 1 |
changeConfigSetting |
WSVIDALLUP |
DEA Input I A DEA +15 V A |
1DEPSA 1DEICACU 1DEP1AVO |
ON 0.62—0.75 15.0—17.0 |
A V |
Check cmdResult==OK commandEcho==768 |
A 2 2 2 |
Wait for all video boards to power up Fail if DEA-A powers down | ||||||||
| 2.2 | Power up all FEPs | 2 | changeConfigSetting | WSFEPALLUP | Check cmdResult==OK commandEcho==89 |
A | Y | 1,2 | 60k | ||||||||||
| 2.3 | Dump System Config. | 1 | dumpSysConfig | RS_0000001 | Check cmdResult==OK commandEcho==66 |
B | Y | 1,2 | 60k | ||||||||||
| 3 | Science run on ACIS-I | ||||||||||||||||||
| 3.1 | Load Faint TE pblock | 1 | loadTeBlock | WT00C66014 | Check cmdResult==OK commandEcho==14458 |
A | Y | 1,2 | 60k | ||||||||||
| 3.2 | Start bias-only run | 3 | startScience | X2Z0000005 | Check cmdResult==OK commandEcho==48 |
scienceReport | A | Verify terminationCode==2 in scienceReport |
Y | 1,2 | 60k | ||||||||
| 4 | Science run on ACIS-S | ||||||||||||||||||
| 4.1 | Load Faint TE pblock | 1 | loadTeBlock | WT00C68014 | Check cmdResult==OK commandEcho==14460 |
A | Y | 1,2 | 60k | ||||||||||
| 4.2 | Start bias-only run | 3 | startScience | X2Z0000005 | Check cmdResult==OK commandEcho==48 |
scienceReport | A | Verify terminationCode==2 in scienceReport |
Y | 1,2 | 60k | ||||||||
| 5 | Power down all boards | ||||||||||||||||||
| 5.1 | Power down all boards | 1 | changeConfigSetting | WSPOW00000 | Check cmdResult==OK commandEcho==773 |
A | Y | 1,2 | 60k | ||||||||||
| 5.2 | Dump System Config. | 1 | dumpSysConfig | RS_0000001 | Check cmdResult==OK commandEcho==66 |
B | Y | 1,2 | 60k | ||||||||||