| Step # | Title 5.15_V1.0 | Time (mins) | Cmd Desc | Cmd Mnem | Cmd EGSE | Seq Key | Tlm Desc | Tlm Mnem | Exp Val | Units | Tlm EGSE | Other Ver | Crit | Desc | Notes | RT Con | Tlm Fmt | Min Alt | SIM Pos |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Power Down Video Boards | ||||||||||||||||||
| 1.1 | Power off video boards | 1 | changeConfigSetting | WSVIDALLDN | Check cmdResult==OK commandEcho==1541 |
A | Y | 1,2 | 60k | ||||||||||
| 2 | Turn off DEA-B input power | ||||||||||||||||||
| 2.1 |
DEA Power B Off | 1 |
DEA-B Power Off |
1DEPSBOF |
DEA +24 V B DEA Input V B DEA +6 V B DEA -6 V B DEA +15 V B DEA -15 V B DEA +28 V B |
1DEPSB 1DEP2BVO 1DE28BVO 1DEP0BVO 1DEN0BVO 1DEP1BVO 1DEN1BVO 1DEP3BVO |
OFF 0.0±0.5 25.0—34.0 0.0±0.5 0.0±0.5 0.0±0.5 0.0±0.5 0.0±0.5 |
V V V V V V V |
1 2 2 2 2 2 2 |
Ignore if DPA unpowered Powers off DEA and board 11 Expect DEA-A power 0.0 W | SF 4.4.2 | Y |
1,2,4,6 |
60k |
|||||
| 2.2 | Disable DEA PS A | 1 | DEA-A Power Disable | 1DEPSADS | DEA B Dis | 1DEPSBX | DIS | Ignore if DPA unpowered | SF 4.4.1 | Y | 1,2,4,6 | 60k | |||||||
| 3 | Verify that DEA-A heaters are off | ||||||||||||||||||
| 3.1 |
Verify heaters off | 1 |
DEA A DH Htr Off DEA A DH Htr Dis DEA A Bakeout Off DEA A Bakeout Dis |
1DAHTAON 1DAHTAEN 1DABOAON 1DABOAEN |
OFF DIS OFF DIS |
1 2 1 2 |
Verify housing heater is off Verify housing heater disabled Verify bakeout heater is off Verify bakeout heater disabled | 1,2,4,6 |
60k |
||||||||||
| 4 | Turn on DEA-A input power | ||||||||||||||||||
| 4.1 | Enable DEA PS A | 1 | DEA-A Power Enable | 1DEPSAEN | DEA A En | 1DEPSAX | ENB | Ignore if DPA unpowered | Y | 1,2,4,6 | 60k | ||||||||
| 4.2 |
DEA Power A On | 1 |
DEA-A Power On |
1DEPSAON |
DEA +24 V A DEA Input V A DEA Input I A DEA +6 V A DEA -6 V A DEA +15 V A DEA -15 V A DEA +28 V A |
1DEPSA 1DEP2AVO 1DE28AVO 1DEICACU 1DEP0AVO 1DEN0AVO 1DEP1BAO 1DEN1BAO 1DEP3BAO |
ON 24.0—26.0 25.0—34.0 0.62—0.75 5.6—6.7 -7— -5.7 15.0—17.0 -17.0— -15.0 >26.0 |
V V A V V V V V |
1 2 2 2 2 2 2 2 |
Ignore if DPA unpowered Powers on DEA board 11 Expect DEA-A power 21±3 W | Y |
1,2,4,6 |
60k |
||||||
| 5 | Reboot active BEP | ||||||||||||||||||
| 5.1 | DPA Boot Modifier | 1 | DPA Boot Modifier | 1BMMODIBM(0) | Disable uplink boot | Y | 1,2 | 60k | |||||||||||
| 5.2 | Set warm boot flag on | 1 | DPA Warm Boot | 1WRMBTSB(1) | Warm boot active BEP | Y | 1,2 | 60k | |||||||||||
| 5.3 | Halt BEP | 1 | DPA Command Reset | 1RSETIRT(1) | Hold active BEP reset line | Y | 1,2 | 60k | |||||||||||
| 5.4 | Restart BEP | 1 | 1RSETIRT(0) | Release BEP reset line | Y | 1,2 | 60k | ||||||||||||
| 5.5 |
Check BEP boot | 2 |
bepStartupMessage swHousekeeping |
version>11 warmbootFlag=1 version>11 |
|||||||||||||||
| 5.6 |
Check HW LEDs | 2 |
BEP select BEP FIFO not full BEP FIFO not empty |
1STAT4ST 1STAT6ST 1STAT7ST |
0 1 0 |
2 2 2 |
0 indicates BEP-A is selected 1˙means˙FIFO˙not˙full˙ 1˙means˙FIFO˙not˙empty | Y Y Y |
1,2" "1,2" "1,2 |
60k 60k 60k |
|||||||||
| 5.7 |
Check SW LEDs | 2 |
BEP initialization Watcdog boot Science run status |
1STAT3ST 1STAT2ST 1STAT1ST 1STAT0ST |
0 1 1 0 or 1 |
1 2 2 2 |
0 means BEP sw is running 1 means no watchdog reboot 1 means science idle this bit toggles to indicate BEP running | Y Y Y Y |
1,2" "1,2" "1,2" "1,2 |
60k 60k 60k 60k |
|||||||||
| 6 | Start DEA Interface Housekeeping | ||||||||||||||||||
| 6.1 | Load Board 11 DEA Hkp | 1 | loadDeaBlock | WD00001024 | Check cmdResult==OK commandEcho==225 |
B | Monitor FP temp and DEA voltages | Y | 1,2 | 60k | |||||||||
| 6.2 | Start DEA Hkp run | 1 | startDea | XDZ0000005 | Check cmdResult==OK commandEcho==18 |
B | If Hkp running, cmdResult==CLOBBERED | Y | 1,2 | 60k | |||||||||
| 7 | Start FP temperature control | ||||||||||||||||||
| 7.1 | set FP temp to -121^0C | 1 | changeConfigSetting | WSFTNEG123 | Check cmdResult==OK commandEcho==6369 |
A | Y | 1,2 | 60k | ||||||||||
| 7.2 | set FP temp to -120^0C | 2 | changeConfigSetting | WSFTNEG121 | Check cmdResult==OK commandEcho==1220 |
A | Y | 1,2 | 60k | ||||||||||
| 8 | Power video boards from DEA-A | ||||||||||||||||||
| 8.1a | Set I0,S0 relays to DEA-A | 1 | changeConfigSetting | WS_RELAY_0 | Check cmdResult==OK commandEcho==14429 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.1b | Power up I0 | 1 | changeConfigSetting | WSPOW00100 | Check cmdResult==OK commandEcho==14439 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.1c | Power up S0 | 1 | changeConfigSetting | WSPOW01100 | Check cmdResult==OK commandEcho==14440 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.2a | Set I1,S1 relays to DEA-A | 1 | changeConfigSetting | WS_RELAY_1 | Check cmdResult==OK commandEcho==14430 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.2b | Power up I1 | 1 | changeConfigSetting | WSPOW01300 | Check cmdResult==OK commandEcho==14443 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.2c | Power up S1 | 1 | changeConfigSetting | WSPOW03300 | Check cmdResult==OK commandEcho==14445 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.3a | Set I2,S3 relays to DEA-A | 1 | changeConfigSetting | WS_RELAY_2 | Check cmdResult==OK commandEcho==14433 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.3b | Power up I2 | 1 | changeConfigSetting | WSPOW03700 | Check cmdResult==OK commandEcho==14446 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.3c | Power up S3 | 1 | changeConfigSetting | WSPOW0B700 | Check cmdResult==OK commandEcho==14448 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.4a | Set I3,S2 relays to DEA-A | 1 | changeConfigSetting | WS_RELAY_3 | Check cmdResult==OK commandEcho==14434 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.4b | Power up I3 | 1 | changeConfigSetting | WSPOW0BF00 | Check cmdResult==OK commandEcho==14451 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.4c | Power up S2 | 1 | changeConfigSetting | WSPOW0FF00 | Check cmdResult==OK commandEcho==14453 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.5a | Set S4,S5 relays to DEA-A | 1 | changeConfigSetting | WS_RELAY_4 | Check cmdResult==OK commandEcho==14436 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.5b | Power up S4 | 1 | changeConfigSetting | WSPOW1FF00 | Check cmdResult==OK commandEcho==14454 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8.5c | Power up S5 | 1 | changeConfigSetting | WSPOW3FF00 | Check cmdResult==OK commandEcho==14457 |
1DEPSA | A | Wait 60 secs, then check that 1DEPSA=ON | Y | 1,2 | 60k | ||||||||
| 8 | Prepare for science runs | ||||||||||||||||||
| 8.1 | Power up all FEPs | 2 | changeConfigSetting | WSFEPALLUP | Check cmdResult==OK commandEcho==89 |
A | Y | 1,2 | 60k | ||||||||||
| 8.2 | Dump System Config. | 1 | dumpSysConfig | RS_0000001 | Check cmdResult==OK commandEcho==66 |
B | Y | 1,2 | 60k | ||||||||||
| 9 | Science run on ACIS-I | ||||||||||||||||||
| 9.1 | Load Faint TE pblock | 1 | loadTeBlock | WT00C66014 | Check cmdResult==OK commandEcho==14458 |
A | Y | 1,2 | 60k | ||||||||||
| 9.2 | Start bias-only run | 3 | startScience | X2Z0000005 | Check cmdResult==OK commandEcho==48 |
scienceReport | A | Verify terminationCode==2 in scienceReport |
Y | 1,2 | 60k | ||||||||
| 10 | Science run on ACIS-S | ||||||||||||||||||
| 10.1 | Load Faint TE pblock | 1 | loadTeBlock | WT00C68014 | Check cmdResult==OK commandEcho==14460 |
A | Y | 1,2 | 60k | ||||||||||
| 10.2 | Start bias-only run | 3 | startScience | X2Z0000005 | Check cmdResult==OK commandEcho==48 |
scienceReport | A | Verify terminationCode==2 in scienceReport |
Y | 1,2 | 60k | ||||||||
| 11 | Power down video boards | ||||||||||||||||||
| 11.1 | Power off video boards | 1 | changeConfigSetting | WSVIDALLDN | Check cmdResult==OK commandEcho==1541 |
A | Y | 1,2 | 60k | ||||||||||
| 11.2 | Dump System Config. | 1 | dumpSysConfig | RS_0000001 | Check cmdResult==OK commandEcho==66 |
B | Y | 1,2 | 60k | ||||||||||