ACIS SOT Shift Report 2015-01-12 Shift: l5653

  Start: 2015:012:21:05:00  4:05pm Jan. 12, 2015
    End: 2015:012:22:08:00  5:08pm Jan. 12, 2015

ACIS Personnel: Dick Edgar, Gregg Germain, Royce Buehler, Peter Ford, 
                Paul Plucinsky, Bob Goeke, Ed Morgan


PLAN
--------

We intend to run CAP1342 to execute the DPA-A Power Off Recovery


SUMMARY:
--------

The CAP and associated SOP ran exactly as expected.  DPA-A was turned
on and ACIS is now running version 53 of its flight SW.

           SOP_61038_DPAA_ON.SSC: successful  
      Start SOP_ACIS_SW_STDFOPTG: successful  
SOP_SI_SET_ACIS_FP_TEMP_TO_M121C: successful




TIMELINE (GMT day 012)
----------------------
21:05    AOS on DSS 54
21:06    verify proper ACIS configuration, Science idle.
                    - No Stop Science Command necessary

21:16    start CAP 1342
21:16       Format 2
21:16       Expected state.

21:16     Start SOP_61038_DPAA_ON - Enable and turn on DPA-A power supply
21:18     DPA turned on: SOP_61038_DPAA_ON successful
21:18     Flight Version Number: 11

21:19     Running SSR Dump to completion before continuing.
21:20     Bi-levles corrct


21:31    Start SOP_ACIS_SW_STDFOPTG - Load and execute V53 of the ACIS software
21:31    Verified Format 2

21:32    reset patch list
21:35    dump empty patch list

21:35    load standard rev F. patches

21:38    load smTimedLookup patch
21:39    load CC3X3 patch
21:41    load Event Histogram patch
21:42    load Compress All patch
21:42    load Threshold Crossing patch

21:44    load the patch version number

21:45    dump contents of patch to compare and verify
21:45    dumped patches verifies properly
21:46    warm boot the BEP to activate the patches
21:47    warm boot is successful, flight SW version 53 is running
21:51    load DEA HKP parameter block
21:54    enable and activate DEA HKP 
21:58    all telemetry looks nominal 

21:59    FP Temp= -118.3

22:00    Both SCS's cleared

22:00    the ACIS door is still open
22:00    exit SOP_ACIS_SW_STDFOPTG

22:01    Start SOP_SI_SET_ACIS_FP_TEMP_TO_M121C 
           - Set the Focal Plane Temp setpoint to -121C
22:08    SOP_SI_SET_ACIS_FP_TEMP_TO_M121C completed

22:08    exit CAP 1342