ACA HDR3 Pseudo-MSIDS

MSID	Description
ac_status_word	AC status word. A status word read from the AC. The bits in the word are defined as follows: xxxx xxrr rrtt eccp X = spare bits R = CCD readout mode 1 => S/H input is grounded during pixel readout 2 => CCD reset is pulsed during column flush 4 => CCD reset/sw is pulsed during row shifts 8 => MUX is switched to ground when A/D not in use T = Test signal select (test signals not available in flight) E = Cmd error. AC cmd input buffer was overwritten C = Clock period for parallel shifts 0 => 6 microsec 1 => 12 microsec 2 => 24 microsec 3 => 48 microsec P = PromWrite? flag: true when AC EEPROM is in the write mode.
misc_status_bits	Miscellaneous status bits showing the status of the following 16 flag variables starting with the LSB and ending with the MSB: bit 0 (LSB): AcSendTimeOut? bit 1: AcIdleTimeOut? bit 2: TecActive? bit 3: TecHeat? bit 4: DecAcTable? bit 5: AcTableCkSumOK? bit 6: StackError? bit 7: WarmBoot? bit 8: IdleCode LSB bit 9: CalMode? bit 10: CalModePending? bit 11: IuData? bit 12: IuDataPending? bit 13: DsnFixed? bit 14: InitialCalFillOK? bit 15 (MSB): IoUpdTimeout?
ccd_molyb_therm_1	A/D converter reading for the CCD moly base thermistor number 1
ccd_molyb_therm_2	A/D converter reading for the CCD moly base thermistor number 2
ccd_det_therm	A/D converter reading for the CCD detector thermistor
ad_5v_ps	A/D converter reading for the +5 volt power supply; 1 LSB=0.30518 mv
ad_15v_ps	A/D converter reading for the +15 volt power supply; 1 LSB=0.61035 mv
ad_m15v_ps	A/D converter reading for the -15 volt power supply; 1 LSB=0.61035 mv
ad_27v_ps	A/D converter reading for the +27 volt power supply; 1 LSB=1.04597 mv
ad_analog_gnd	A/D converter reading for analog ground; 1 LSB=0.30518 mv
ad_converter_therm	A/D converter reading for the A/D converter thermistor.
ad_smhs_therm	A/D converter reading for the secondary mirror thermistor, HRMA side
ad_smohs_therm	A/D converter reading for the secondary mirror thermistor, Opposite from the HRMA side
ad_pmhs_therm	A/D converter reading for the primary mirror thermistor, HRMA side
ad_pmohs_therm	A/D converter reading for the primary mirror thermistor, opposite from the HRMA side
ad_achhs_therm	A/D converter reading for the AC housing thermistor, HRMA side
ad_achohs_therm	A/D converter reading for the AC housing thermistor, opposite HRMA side
ad_lc_therm	A/D converter reading for the lens cell thermistor
proc_stack_telem_ctr	A word containing the processor data stack pointer in the high byte, and an update counter in the low byte that increments once for every 1.025 second telemetry update.
sci_hdr_pulse_period	The science header pulse period, as measured by the PEA; 1 LSB = 2 microseconds
zero_off16_quad_a	A 16-bit zero offset for pixels read from CCD quadrant A; 1 LSB = 1 A/D converter count (nominally 5 electrons)
zero_off16_quad_b	A 16-bit zero offset for pixels read from CCD quadrant B; 1 LSB = 1 A/D converter count (nominally 5 electrons)
zero_off16_quad_c	A 16-bit zero offset for pixels read from CCD quadrant C; 1 LSB = 1 A/D converter count (nominally 5 electrons)
zero_off16_quad_d	A 16-bit zero offset for pixels read from CCD quadrant D; 1 LSB = 1 A/D converter count (nominally 5 electrons)
zero_off32_quad_a	A 32-bit zero offset for pixels read from CCD quadrant A; 1 LSB = 2^-16 A/D converter counts
zero_off32_quad_b	A 32-bit zero offset for pixels read from CCD quadrant B; 1 LSB = 2^-16 A/D converter counts
zero_off32_quad_c	A 32-bit zero offset for pixels read from CCD quadrant C; 1 LSB = 2^-16 A/D converter counts
zero_off32_quad_d	A 32-bit zero offset for pixels read from CCD quadrant D; 1 LSB = 2^-16 A/D converter counts
ccd_flush_dur	The time required for the most recent flush of the CCD; 1 LSB=2 microseconds
ccd_row_shift_period	The CCD row shift clock period currently in effect; 1 LSB = 1 microsecond
avg_bkg	An overall average background reading derived from the most recent CCD readout. This is an average from all tracked images and from all search readout segments. One LSB = 1 A/D converter count (nominally 5 electrons).
dsn_hdr1	Header 1 for Deep Space Network record.
dsn_hdr2	The record counter and Header 2 for Deep Space Network records. The record counter occupies the three high order bytes, and Header 2 occupies the low order byte.
ccd_temp	CCD temperature. 1 LSB=0.01/(2^16) degrees C. The high order 16 bits give the CCD temperature in units of 1 LSB = 0.01 degrees C.
ccd_setpoint	The CCD temperature control setpoint; 1 LSB=0.01 degrees C
aca_temp	The temperature used in the angle calibration equations that convert star positions from CCD row and column coordinates to Y and Z angles for OBC telemetry; 1 LSB = 1/256 degrees C.
last_ram_fail_addr	The address in RAM of the failure most recently detected by the RAM write-and-read test
dac	The number most recently written to the TEC power control DAC.