We have decided that ACIS activities shall be created in a tab-separated ASCII format so that the various users will be able to read the data into their SW of choice with ease. The following file contains a description of the columns which are now contained in the activity descriptions.

- Column descriptions (Text) (Postscript) (LaTeX)

- Text and Postscript only (Text) (Postscript)

- FOT March 10 release: mapping of FOT and SOT names (LaTeX) (Postscript)
- FOT March 19 release: mapping of FOT and SOT names (LaTeX) (Postscript)
- Relationship between flight procedures and existing TV procedures (LaTeX) (Postscript)
- A table relating the new, truncated names of the SOT procedures to the old procedure names, including editing status from April comments from the ACIS team: (LaTeX) (Postscript)
- SOT procedure review during May and June 1999: Status of SOT procedure review, includung new versions, new procedure names, and deletions (LaTeX) (Postscript)
- Schedule for ACIS Team signoff on SOT procedures: (LaTeX) (Postscript)

- Black: procedure is ready to be developed by FOT
- Red: procedure is still under development by SOT
- Green: expected change is only a PB update

The links below point to the Tab-Separated Values (TSV) ASCII files, the Postscript files, and the ASCII LaTeX files. The page is under construction and will be updated frequently. The TSV files only have the command sequences and do NOT have the prose which accompanies each procedure (which is contained in the Postscript and LaTeX files).

- 1.1_V2.0 Open Small Vent Valve (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.22_V2.0 Turn on Pressure Transducers A & B (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.3_V2.1 Turn on DPA A & B and DEA A [realtime version] (Last Revised: June 25,1999) (TSV) (Postscript) (LaTeX)
- 1.4_V2.0 Load DEA HK PB and Start DEA HK run (Last Revised: June 23, 1999) (TSV) (Postscript) (LaTeX)
- 1.5_V2.0 Turn on DA Heater side B (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.6_V2.1 Set focal plane temperature to -120 C (Last Revised: June 25,1999) (TSV) (Postscript) (LaTeX)
- 1.7_V2.0 Open Big Vent Valve (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.8_V2.0 Partial Bakeout, set FP to -50 C (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.9_V2.0 Set focal plane temperature to -90 C (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.10_V2.2 Dump flight SW (Last Revised: August 9,2012) (TSV) (Postscript) (LaTeX) (PDF)
- 1.11_V2.0 Flight Software Standard Set of Patches (Last Revised: June 25,1999) (TSV) (Postscript) (LaTeX)
- 1.12_V2.0 Flight Software Event Histogram and CC 3x3 Patch (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.13_V2.1 Diagnostic Mode [SCS version] (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.14_V2.0 Raw Data from each CCD (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.15_V2.0 OBF Integrity Test (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.16_V2.0 Dark Current Measurement (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.23_V2.2 Internal Calibration Source Measurement (Last Revised: August 3,1999) (TSV) (Postscript) (LaTeX)
- 1.21_V2.0 Event Histogram on the Internal Cal Source with ACIS-S in Format 1 (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.24_V2.0 Event Histogram on the Internal Cal Source with ACIS-I in Format 1 (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 1.25_V2.1 Continuous Clocking 3x3 (From Bev, Last Revised: August 3,1999) (TSV) (Postscript) (LaTeX)
- 1.26_V2.1 Flight Software TE Ignore Initial Frames Patch (From Fred, Last Revised: July 29,1999) (TSV) (Postscript) (LaTeX)
- 1.27_V2.1 Raw Mode Data for Bias Algorithm Optimization (From Fred, Last Revised: July 29,1999) (TSV) (Postscript) (LaTeX)
- 1.28_V2.0 Set focal plane temperature to -121 C (Last Revised: August 1,1999) (TSV) (Postscript) (LaTeX)
- 1.29_V2.0 Set focal plane temperature to -126 C (Last Revised: August 1,1999) (TSV) (Postscript) (LaTeX)
- 1.30_V2.0 Internal Calibration Source and Background Measurement (Last Revised: August 3,1999) (TSV) (Postscript) (LaTeX)
- 1.31_V2.0 Continuous Clocking Raw Data
(From Fred, Last Revised: August 6,1999)
(TSV)
(Postscript)
(LaTeX)
### 2.0 Abridged Long Form Functional Test (divided into pieces)

- 1.13_V2.1 Diagnostic Mode (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 2.3_V2.0 ACIS Load from Uplink Test (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 2.4_V2.0 Software Boot Modes: Warm & Cold (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 2.5_V2.0 BEP/DEA Power Combinations (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 2.6_V2.0 DEA/FEP MUX Verification (Last revised: June 27,1999) (TSV) (Postscript) (LaTeX)

- 2.9_V2.0 Full Bakeout (Last Revised: June 28,1999) (TSV) (Postscript) (LaTeX)
- 2.10_V2.2 Open ACIS Camera Housing Door (Last Revised: July 2,1999) (TSV) (Postscript) (LaTeX)
- 2.13_V2.0 Exit Full Bakeout and Return to Thermal Standby Mode (Last Revised: June 28,1999) (TSV) (Postscript) (LaTeX)
- 2.11_V2.2 CCD Orbital Background Measurement with the ACIS Door Open (Last Revised:August 8,1999) (TSV) (Postscript) (LaTeX)
- 2.12_V2.1 HRMA Flux Transfer Standard Sources Measurements (Last Revised:August 10,1999) (TSV) (Postscript) (LaTeX)
- 2.14_V2.0 Unfiltered CCD Orbital Background Measurement (From Fred, Last Revised:August 8,1999) (TSV) (Postscript) (LaTeX)
- 2.15_V1.0 Raw Mode Data In Postage Stamp Format (From Fred, Last Revised:August 10,1999) (TSV) (Postscript) (LaTeX)
- 2.16_V1.1 Video Board Temperature Measurements (From Bev, Last Revised:August 24,1999) (TSV) (Postscript) (LaTeX)
- 2.17_V2.0 Close ACIS Camera Housing Door (Last Revised: September 30,1999) (TSV) (Postscript) (LaTeX)

These originated from Royce and were provided in HTML format from Dan Muleady. These are the draft command procedures which will be burned into the spacecraft sometime soon. There are three SCSs for ACIS, one for load shedding in a power emergency, one for eclipse exit powerup, and one for radiation alert response. The first version had the byte-swapping problem in the ACIS SW command packets. The command loads were re-generated and put on the spacecraft again in October, 1998.

- 3.2_V2.0 Emergency Load Shed Procedure (Last Revised: June 28,1999) (TSV) (Postscript) (LaTeX)
- 3.4_V2.0 Autonomous Power-up Procedure (Last Revised: June 28,1999) (TSV) (Postscript) (LaTeX)
- 3.5_V1.1 SI Safing procedures [ACIS RADMON alert is included in this file] (HTML)

- 1.4_V2.0 Load DEA HK PB and Start DEA HK run (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.5_V2.0 Turn on DA Heater side B (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 1.6_V2.1 Set focal plane temperature to -120 C (Last Revised: June 25,1999) (TSV) (Postscript) (LaTeX)
- 1.9_V2.0 Set focal plane temperature to -90 C (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 4.2_V2.0 Turn on DPA A & B and DEA A [SCS version] (Last Revised: June 28,1999) (TSV) (Postscript) (LaTeX)
- 4.3_V2.1 Turn on DPA A (Last Revised: March 25, 2016) (TSV) (Postscript) (LaTeX)
- 4.4_V2.1 Turn on DPA B (Last Revised: March 25, 2016) (TSV) (Postscript) (LaTeX)
- 4.5_V2.7 Turn on DEA A (Last Revised: July 24, 2017) (TSV) (Postscript) (LaTeX) (PDF) (Figure 1) (Figure 2)
- 4.6_V2.1 Turn off DPA A (Last Revised: March 25, 2016) (TSV) (Postscript) (LaTeX)
- 4.7_V2.1 Turn off DPA B (Last Revised: March 25, 2016) (TSV) (Postscript) (LaTeX)
- 4.8_V2.4 Turn off DEA A (Last Revised: July 12, 2017) (TSV) (Postscript) (LaTeX) (PDF)
- 4.9_V2.0 Turn off DPA A & B and DEA A (Last Revised: June 28,1999) (TSV) (Postscript) (LaTeX)
- 4.10_V2.1 Put ACIS into Memory Save Mode (Last Revised: August 25,1999) (TSV) (Postscript) (LaTeX)
- 4.11_V2.1 Put ACIS into Thermal Standby Mode (Last Revised: April 7, 2017) (TSV) (Postscript) (LaTeX) (PDF)
- 4.17_V2.0 Warm Boot the ACIS BEP (Last Revised: December 1, 2015) (TSV) (Postscript) (LaTeX)
- 4.18_V2.1 Cold Boot the ACIS BEP (Last Revised: December 1, 2015) (TSV) (Postscript) (LaTeX)
- 4.19_V2.0 Radiation Belt Entry Procedure (Last Revised: June 29,1999) (TSV) (Postscript) (LaTeX)
- 4.20_V2.0 Turn off Pressure Transducers A & B (Last Revised: June 23,1999) (TSV) (Postscript) (LaTeX)
- 4.21_V2.0 Set focal plane temperature to -110 C (Last Revised: June 29,1999) (TSV) (Postscript) (LaTeX)
- 4.22_V2.0 Flight Software Event Histogram and CC 3x3 Patch Revision B (Last Revised: January 3,2000) (TSV) (Postscript) (LaTeX)
- 4.23_V2.3 Flight Software Event Histogram, CC 3x3, Compress All, & and Timed Lookup Patch Revision C (Last Revised: May 26, 2004) (TSV) (Postscript) (LaTeX)
- 4.24_V2.2 Warm Boot the Active ACIS BEP and Start DEA HK Run (Last Revised: December 8, 2015) (TSV) (Postscript) (PDF) (LaTeX)
- 4.25_V2.1 Flight Software Standard Patch C, Optional Patch C (Last Revised: September 4, 2008) (TSV) (Postscript) (LaTeX) (PDF)
- 4.26_V2.2 Flight Software Standard Patch E, Optional Patch E (Last Revised: March 16, 2010) (TSV) (Postscript) (LaTeX) (PDF)
- 4.26_V2.3 Flight Software Standard Patch E, Optional Patch E including FIFO contingency (Last Revised: July 19, 2011) (TSV) (Postscript) (LaTeX) (PDF)
- 4.27_V2.1 Flight Software Standard Patch E, Optional Patch F (Last Revised: August 23, 2011) (TSV) (Postscript) (LaTeX) (PDF)
- 4.28_V2.2 Flight Software Standard Patch F, Optional Patch G (Last Revised: December 2, 2015) (TSV) (Postscript) (LaTeX) (PDF)
- 4.29_V2.2 Turn On DEA A and Test Video Boards (Last Revised: October 2, 2017) (TSV) (Postscript) (LaTeX) (Figure 1) (Figure 2) (Figure 3)
- 4.30_V2.5 Turn On DEA B (Last Revised: August 10, 2017) (TSV) (Postscript) (PDF) (LaTeX) (Figure 1) (Figure 2)
- 4.31_V2.6 Turn Off DEA B (Last Revised: October 17, 2017) (TSV) (Postscript) (PDF) (LaTeX)
- 4.32_V2.1 Flight Software Standard Patch G, Optional Patch H (Last Revised: January 27, 2020) (TSV) (Postscript) (LaTeX) (PDF)
- 4.33_V2.0 Flight Software Standard Patch G, Optional Patch I (Last Revised: May 17, 2022) (TSV) (LaTeX) (PDF)
- 4.34_V2.1 Flight Software Standard Patch H, Optional Patch J (Last Revised: July 18, 2023) (TSV) (LaTeX) (PDF)

- 5.1_V2.0 Close Little Vent Valve (Last Revised: June 29,1999) (TSV) (Postscript) (LaTeX)
- 5.3_V2.0 Close Large Vent Valve (Last Revised: June 29,1999) (TSV) (Postscript) (LaTeX)
- 5.5_V2.0 Open Small Vent Valve in Emergency Deployment (Last Revised: June 27,1999) (TSV) (Postscript) (LaTeX)
- 5.6_V2.0 Turn Off DA heater side B and turn on side A (Last Revised: June 29,1999) (TSV) (Postscript) (LaTeX)
- 5.7_V2.0 Turn Off DA heater side A and turn on side B (Last Revised: June 29,1999) (TSV) (Postscript) (LaTeX)
- 5.8_V2.2 Switch from BEP A to BEP B (Last Revised: May 24, 2016) (TSV) (Postscript) (LaTeX) (PDF)
- 5.9_V2.4 Switch from DEA A to DEA B (Last Revised: August 14, 2018) (LaTeX) (TSV) (Postscript) (PDF) (Figure 1) (Figure 2)
- 5.10_V1.1 Partial Bakeout, Set FP to +20~C (Last Revised: July 16,1999) (TSV) (Postscript) (LaTeX)
- 5.11_V2.1 Flight Software FEP0 Engineering Patch (Last Revised: November 18,1999) (TSV) (Postscript) (LaTeX)
- 5.12_V1.0 Bakeout: FP to -60 C, DH to +20 C (Last Revised: September 30, 2003) (TSV) (Postscript) (LaTeX)
- 5.13_V1.0 Exit Bakeout: FP to -60 C, DH to +20 C (Last Revised: October 6, 2003) (TSV) (Postscript) (LaTeX)
- 5.14_V2.2 DEA and FEP diagnostics proecdure (Last Revised: December 1, 2015) (TSV) (Postscript) (LaTeX)
- 5.16_V2.1 Monitoring the active flight EEPROM (Last Revised: November 10, 2015) (TSV) (Postscript) (LaTeX) (PDF)
- 5.17_V2.0 Switch from BEP B to BEP A (Last Revised: May 26, 2016) (TSV) (Postscript) (LaTeX) (PDF)

- RTS to command an ACIS-I CTI measurement on the descending leg of the orbit, including a disable of the RADMON command. (Last Revised: November 18,2003) (Text)
- RTS to command an ACIS-I CTI measurement on the ascending leg of the orbit. (Last Revised: January 13,2004) (Text)

- SOP_OPS_UNSAFE_ACIS_PHASE1 (Last Revised: October 31, 2002) (MS-Word) (PDF)
- SOP_SYSTEM_UNSAFE_ACIS_PHASE2 (Last Revised: October 31, 2002) (MS-Word) (PDF)

last modified 17 May 2022

Dr. Paul Plucinsky

Harvard-Smithsonian Center for Astrophysics

60 Garden Street, Mail Stop 70

Cambridge, MA 02138, USA

Ph.: (617) 496-7726

Fax: (617) 495-7356

E-mail: plucinsky@cfa.harvard.edu