Synopsis
Return the model spectrum in the form required by MARX
Syntax
(xhi, y) = get_marx_spectrum(id=None, elow=None, ehigh=None, ewidth=None, norm=None)
Description
The get_marx_spectrum() command turns the current model values into the form expected by MARX (the Chandra simulator). The x values are the high edges of each bin (in keV) and the y values are the model flux in units of photon/cm^2/s (they give the integrated flux for each bin, rather than the flux density as displayed by the plot_source command).
Please see the MARX documentation of the spectrum format for further information on how to use this routine.
Loading the routine
The routine can be loaded into Sherpa by saying:
from sherpa_contrib.marx import *
Arguments
| Name | Default value | Description |
|---|---|---|
| id | None | Which dataset to use: if None then the value returned by get_default_id() will be used. |
| elow | None | The minimum energy at which to evaluate the model; this parameter controls the lower edge of the lowest-energy bin, and is in keV. A value of None means to use the lowest energy bin from the ARF grid. This value should not be smaller than 0.2 keV. |
| ehigh | None | The maximum energy at which to evaluate the model; this parameter controls the upper edge of the highest-energy bin, and is in keV. A value of None means to use the highest energy bin from the ARF grid. This value should not be larger than 10 keV. |
| ewidth | None | The bin width to use, in keV. A value of None means to use the bin width from the ARF grid. |
| norm | None | A scaling factor to allow you to easily change the overall flux of the model. A value of None is equivalent to a factor of 1; a value of 10 would create a MARX spectral model ten times brighter than the input model. |
Examples
Example 1
sherpa> (xhi, y) = get_marx_spectrum()
Get the model values for the default dataset using the units expected by MARX.
Example 2
sherpa> (xhi, y) = get_marx_spectrum(elow=1, ehigh=8)
In this example the returned values are restricted to the range 1 to 8 keV, using the default binning given by the ARF grid. Note that this energy range need not overlap the range used to fit the data (or even the energy ranges of the ARF and RMF files). It should however remain within the range 0.2 to 10 keV.
Bugs
See the bugs pages on the Sherpa website for an up-to-date listing of known bugs.
See Also
- confidence
- get_conf, get_conf_results, get_covar, get_covar_opt, get_covar_results, get_covariance_results, get_int_proj, get_int_unc, get_proj, get_proj_opt, get_proj_results, get_projection_results, get_reg_proj, get_reg_unc
- contrib
- get_chart_spectrum, plot_marx_spectrum, save_marx_spectrum, sherpa_marx
- data
- get_areascal, get_arf, get_arf_plot, get_axes, get_backscal, get_bkg, get_bkg_arf, get_bkg_chisqr_plot, get_bkg_delchi_plot, get_bkg_fit_plot, get_bkg_model, get_bkg_model_plot, get_bkg_plot, get_bkg_ratio_plot, get_bkg_resid_plot, get_bkg_rmf, get_bkg_scale, get_bkg_source, get_bkg_source_plot, get_coord, get_counts, get_data, get_data_contour, get_data_contour_prefs, get_data_image, get_data_plot, get_data_plot_prefs, get_dep, get_dims, get_error, get_exposure, get_grouping, get_indep, get_quality, get_rmf, get_specresp, get_staterror, get_syserror
- filtering
- get_filter
- fitting
- calc_stat_info, get_stat_info
- info
- get_default_id, list_stats
- methods
- get_draws, get_iter_method_name, get_iter_method_opt, get_method, get_method_name, get_method_opt
- modeling
- get_model, get_model_component, get_model_component_image, get_model_component_plot, get_model_plot, get_num_par, get_num_par_frozen, get_num_par_thawed, get_order_plot, get_par, get_pileup_model, get_response, get_source, get_source_component_image, get_source_component_plot, get_source_contour, get_source_image, get_source_plot, image_source
- plotting
- get_split_plot
- psfs
- get_psf, get_psf_contour, get_psf_image, get_psf_plot
- statistics
- get_chisqr_plot, get_delchi_plot, get_prior, get_sampler, get_stat, get_stat_name
- utilities
- get_analysis, get_rate
- visualization
- image_getregion